Angular Clamping Device

1600X600x750

Year of construction: 2002, condition: not inspected (used), Robot no control panel + connection cables Lodpogu U Itsfx Albjah Used, untested robot. No technical documentation available. Not tested.

Condition: good (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,350 mm, workpiece weight (max.): 3,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, tool weight: 27,000 g, We offer in good condition DMG Mori NHX8000 from 2015 with following options: 30/25 KW 15.000 RPM Spindle SK50 Mapps 4S Control 60 tool ATC 800x800 pallet 3.000 kg max table load Signal light 40 bar Internal coolant Touch probe Lsdpfjzlqw Isx Albsah Machine will be in stock in 2 weeks

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Lodpfx Alswbginjbsah Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Lasdpfeuz If Nsx Albjh Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), spindle bore: 260 mm, spindle speed (max.): 900 rpm, travel distance X-axis: 3,200 mm, total height: 3,409 mm, total length: 9,800 mm, total width: 3,609 mm, feed length Z-axis: 530 mm, overall weight: 34,000 kg, CNC Lathe with c-axis Okuma - LU-45M SuperBigBore MACH-ID 9778 Make: Okuma Type: LU-45M SuperBigBore Control: OSP-P200L X-Axis: 3200mm Z-Axis: 530mm Spindle bore:260mm Speedrange: 900Rpm Length: 9800mm Ljdoztctqspfx Albeah Width: 3609mm Height: 3409mm Weight: 34000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2019, operating hours: 31,800 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, feed rate X-axis: 42,000 m/min, feed rate Y-axis: 42,000 m/min, feed rate Z-axis: 42,000 m/min, controller manufacturer: Siemens, controller model: 840d, total height: 2,750 mm, total length: 2,850 mm, total width: 2,350 mm, rotational speed (max.): 20,000 rpm, overall weight: 7,500 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 13,300 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor,

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle power : 18,5 [kW] - Spindle speeds : 4000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 366 [mm] - C axis indexing precision : 0.001 [°] TURRET - Number of positions : 12 - Number of motorized positions : 12 - X/Z stroke : 280 x 785 [mm] - Y stroke : +/- 50 [mm] - Live tools speed : 6000 [rpm] * Live tools power : 5,5 [kW] TAILSTOCK - Tailstock type : Numérique Laedpfjyxr U Rjx Albjh - Type of cone : CM5 - Distance between centers : 705 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 39 [kVA] MACHINE HOURS - Number of working hours : 7261 [h] WEIGHT & DIMENSIONS - Machine floor space : 3800 x 2143 [mm] - Machine height : 2232 [mm] - Machine weight : 6100 [kg] EQUIPMENT - CNC : MORI MSX-850 III (Mitsubishi 720BM) - Tool probe - 3 colors status lamp - Coolant tank - Chips conveyor - Chuck 3 jaws : hydraulique - Number of turning tool holders : 3

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, turning length: 1,045 mm, spindle motor power: 18,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 82 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 1,045 mm, total height: 2,900 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,200 kg, Multi-tasking lathe MAZAK - INTEGREX 200-4 S MACH-ID 9810 Make: MAZAK Type: INTEGREX 200-4 S Control: MAZATROL MATRIX Year: 2010 The Mazak INTEGREX 200-IV S is a multi-tasking CNC turning and milling center with a second/sub-spindle. The “S” indicates the sub-spindle, allowing complete machining of both sides of a workpiece in a single setup. Typical specifications include a maximum machining diameter of approximately 660 mm, a machining length of around 995 mm, and X/Y/Z travels of approximately 580 / 160 / 1,045 mm. The machine features a B-axis milling head, a main spindle and sub-spindle up to approximately 5,000 rpm, and a milling spindle typically capable of 12,000 rpm. It normally uses Capto C6 tooling and is often equipped with a 40-position automatic tool changer. Machines manufactured around 2006–2010 are commonly equipped with the Mazatrol Matrix CNC control. The INTEGREX 200-IV S is designed for complete machining of complex components, combining turning, milling, drilling, tapping and 5-axis positioning in one machine. This significantly reduces the number of setups and eliminates the need to move components between separate turning and milling machines. Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1045mm B Axis: 225° Spindle bore: 82mm Speedrange: 5000Rpm Ledpfxjz Ar Uce Albeah Spindle power: 18.5kW Subspindle speeds:6000Rpm Subspindle bore: 82mm Subspindle power:18.5kW ATC / revolver: 80 Speed live tools:12.000Rpm Length: 4500mm Width: 2400mm Height: 2900mm Weight: 9200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, centre distance 2.500 mm centre height 250 mm grinding wheel diameter 600 mm Total travel of the grinding support 320 mm spindle speeds 50 - 450 mm tool adaptor MK5 tail stock MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). Lajdpfex Avtcjx Albeh The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible NUM 760 CNC Control Fixed steady rest 2 x  Stones and Flanches included Lasdpfjv Dia Asx Albsh Centre height: 647mm Grinding Ø: 1295mm Grinding length: 4267mm Grinding stone dimensions:914 x 152 mmmm Grinding stone speeds: 400 - 1200Rpm Cooling system: Yes Length: 8500mm Width: 4500mm Height: 3200mm Weight: 78000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!