Angle head buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Adjustable angle Elbe ear unit with SK40 recording for SCM CNC-angle unit for drilling Drilling adapter M10 and additional adapter for normal 10 mm Schaftbohrer Unit can be rotated through 360 degrees C axis Adjustment range of - 10 to 90 degrees Ratio 1:1 Speed Max 6000 RPM 2qsffi The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. Includes instructions and detail drawing Please... more
4

Angle for drilling head 90 degrees

Schwäbisch Gmünd, GermanyGermany
6701 km
good (used)
Angle for drilling head 90 degrees 885 x 900 mm clamping surface Bcomcac7g0 T-slots number 7 22/100 mm depth 40 mm Dimensions Lxwxh 885 x 655 x 900 mm more
10
New angle milling head 2124-0086, fitting for lid FP1 milling machine Tool holder MK1, weight approx. 40 kg. Gxjevckse Internal number: MEZ000102 For inquiries please specify, thank you much! The angle milling head was used in an Aussbildungslehrwerkstatt and comes from Erstbesitz.Dieser was not used within a production line. The State is almost new! more
6
Deckel angle milling head 4000 and 6000 RPM Fwyiwpn Motor 0.55Kw 380V 3Ph Spindlecarrier can rotate 360º Spindle can tilt 90º Smallest accessable diam 60mm Biggest accessable depth 170mm Weight 17kg more
6

Angle milling head Heller SK 60

Tönisvorst, GermanyGermany dealership location
6366 km
used
Angle head Make Heller Diameter cone 105 mm Adapter plate can be changed The angle head has been overtaken Spindle retainer for SK 60 Sleeve diameter 220 mm Bolt circle diameter 180 mm Croajxpi Length 800 mm Width 330 mm Height 380 mm Weight 580 kg more
2

Angle heads, normal holders ROMAI WFK SK50/SA

Szekesfehervar, HungaryHungary dealership location
7351 km
2000
used
There are 2 pcs off angle head with SK50 shaft and many attachments and many kind of tool clamping units (collet, Weldon). The number of attachment is 12. Good condition and valuable products. Unfortunatelly not known on which machine type can be fitted. Price on ask. The normal holders are also with SK50 shafts and turning head as well as milling heads. Pull studs are available (in the holders) 2qw37q more
6
Angle drilling head with SK40 recording for SCM CNC angle unit for the recording of 4 drills 4 x stem retainer M10 Spindle distance 32 mm Unit can be rotated through 360 degrees C axis Ratio 1:1 8mutfbb30 Speed Max 6000 RPM The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. Includes instructions and detail drawing Please the PDF file with our terms and conditions and order form. ... more
4

Angle for drilling head 90 degrees

Schwäbisch Gmünd, GermanyGermany
6701 km
good (used)
Angle for drilling head 90 degrees 1295 x 1500 mm clamping surface T-slot number 9 28/135 mm depth 50 mm Zrdfyykx Dimensions Lxwxh 1295 x 880 x 1500 mm Weight approx. 2.8 to more
6
Angle drilling head with SK40 recording for SCM CNC-angle unit to record 3 drills 3 x stem retainer M10 Spindle distance 22 mm 8muy0hmzn Unit can be rotated through 360 degrees C axis Ratio 1:1 Speed Max 6000 RPM The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. Includes instructions and detail drawing Please the PDF file with our terms and conditions and order form. The machine... more


angle head
daily

New machines via email!

Stay updated!
1

WIDE BELT (2-HEAD 53") COSTA SA TS 1350

North Carolina, United StatesUnited States dealership location
518 km
2001
used
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Nccid COSTA SA TS 1350 Wide Belt Sander;Specifications: -- 53" COSTA equipped with (1) Segmented head + (1) Brush cleaning head. -- 1st Head: (1) Veneer platen with variable pressure; 32 mm segmented sensing pads; variable frequency drive for infinitely variable speed control of abrasive belt sanding speed. -- Belt size 53" x 103" with air abrasive belt cleaning. -- 2nd Head: Approx. 6" dia. panel cleaning brush, de-ionizing bar for static discharge,... more
10

Column & Boom Welders ARMCO Column & Boom Welder. With Lincoln Head and Lincoln DC655 Welder

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Capacity 2.5 m x 2.5 m Head rise & fall 2.5 m Head cross movement 2.5 m Amperage 815 amps @ 60% or 650 amps @ 100% Welding heads Lincoln NA-5 automatic Input 415/3/50 Fitted with Lincoln DC-655 power source Length 4 m Bcvzo7hq9n Width 1.5 m Height 4.3 m Nett weight actual. 1,840 Kgs / 1.81 Tons more
5

Angle punching line Voortman V550

Köln, GermanyGermany dealership location
6416 km
1999
used
working lenght:6.000 mm pressing power:180 t Punching capacity:1000 kN cutting capacity:Flach - max. 22 mm cutting capacity:Winkel - max. 150 x 150 x mm punch diameter:30 mm number of punch tools:3 Stk. / pcs. quick change toolholder: connected load frequency:3 x 400 V control:VACON 110 accessories::Zufuhrwagen mit Materialk accessories::Schleppketten-Quertranspo weight of the machine ca.: t Ewx2awkae Voortman V500 is a punch shear system for flat steel and angle profiles. Horizontal and v... more
3

boring head SCHMID UBS Gr.2

Mönchengladbach, GermanyGermany dealership location
6371 km
used
diameter:300 mm tool adaptor:MK 5 Weight:5 kg Sssigk more
3

boring head WOHLHAUPTER UPA 4

Bünde, GermanyGermany dealership location
6460 km
used
diameter 400 mm Klbkz9uz tool adaptor MK 4 face and hollowing out area max. 400 mm Durchm. adjustment of the slide max. 52 mm feed self-acting 0,02-0,24 mm/U. tool tapers in the slides 22 mm max. turning speed 600 p. Min. weight 7 kg Wooden box with accessories Drilling and boring head. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuuwltx3c COSTA SATTT-1350 Wide Belt Sander, (3) Heads;1,350 mm (53") working width; equipped with (2) Combination Heads (1) Segmented Finishing Platen. Head Configuration: -- 1st Head: Combination head with steel rollers and segmented sanding platen between, 15 KW (20 HP) motor. -- 2nd Head: Combination head with steel rollers and segmented sanding platen between, 15 KW (20 HP) motor. -- 3rd Head: "Superfinish" Segmented polishing platen with comput... more
1

boring head D'ANDREA TA 170

Bühl, GermanyGermany dealership location
6593 km
used
diameter 40 - 320 mm tool adaptor SK 50 Qgospw more
3

wire stitching heads- slim Mueller Martini HK 55

Minden, GermanyGermany dealership location
6479 km
good (used)
980 € or nearest Cl9fz2phw more
15

Horizontal Borers UNION BFT90/2 Horizontal Borer with Facing Head and Milling Attachment.

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 24891 Table size 1410 mm x 1250 mm Table Longitudinal traverse (Y) 2000 mm Table Cross traverse (X) 1400 mm Table Swivels 360 degrees Head stock vertical traverse (Z) 1350 mm Input 415/3/50 7.5 kw Spindle & facing speeds 8 - 200 rpm Spindle speeds 250 - 1600 rpm Feed rate 0.003 - 20 mm / min Facing head diameter 520 mm Facing head slide cross traverse 180 mm Spindle traverse 700 mm Spindle diameter 90 mm Spindle Taper 40 int Digital read out anilam Fitted with off-set milling head spi... more
6
Spindle speeds, inf. variable 1600-28000 RPM Bbiu9gv8mq Spindle taper 40 + 50 Misc.accessories MARCELS MASCHINEN CH more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Cwgarsjw TIMESAVERS 252-1 IC Single-Head Wide Belt Sander: --51" width cap. Combination Head --Head Configuration --1st Head: Combination head with 9-1/2" Dia. rubber covered contact roll (55-60 duro) and a 4" wide electronically controlled segmented finishing platen for fine veneer sanding, 30HP-40 HP motor. --Specifications: -- Belt Size – 52″ x 75, Conveyor Belt Size – 52″ -- 14″ min. part length. Work Height Adjust... more
2

Boring Head ROMAI KR 40 23.41

Bühl, GermanyGermany dealership location
6593 km
1988
used
throat - mm tool adaptor - power requirement - kW 23 mm spindle distance max. 400 mm B09x3igo 1200 U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
5
Universal milling head, milling attachment, milling extension, angle milling head -Spare part comes from a Wanderer milling machine type KFH401 -Recording output SK50 -Store input gear -swiveling -Rezs recording mm -Lochkreis mm -Hub travelable approx D89ulx3d -Dimensions 640/520 / H590 mm -Weight 294 kg more
4

wire stitching heads Mueller Martini HK 75

Minden, GermanyGermany dealership location
6479 km
good (used)
Checked Lo9hf2mxx 4 pieces more
4

Angular Head UNBEKANNT

Mönchengladbach, GermanyGermany dealership location
6371 km
used
throat:700 mm tool adaptor: 50 power requirement:60 kW total power requirement: kW weight of the machine ca.:0,8 t dimensions of the machine ca.:0,8 x 0,8 x 0,8 m Bb9wy7c73f double sided face milling head with 2 ISO 50 taper, suitable for portal type milling machine drive end taper ISO 60 min. distance cutter heads 400 mm outside dimensions flange end 780 x 780 mm clamping hole distance square 620 mm more
5
throat mm tool adaptor SK40 power requirement kW ratio 1:6 dia. of draw-in collets 2 - 12 mm turning speeds max. 12.000 U/min total power requirement kW weight of the machine ca. 0,02 t Yw0xmr0t Fast running SK40 collet including collet holder -and set (2 - 12mm) more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Sszzj8 TAGLIABUE TAG T123KS Wide Belt Sander (4) Heads:52" Width Cap. Crossbelt, Drum, Combination Head, Combination Head. Head Configuration: -- 1st Head: Segmented cross belt with electronically controlled, 52 mm wide air activated segments, 15/22 KW (2) speed motor, 6" x 289" abrasive belt with 5.5" x 217" inside Chevron belt. -- 2nd Head: Spiral Rubber covered contact roll, 15/22 KW motor. -- 3rd and 4th Heads: Platen head (smooth steel rollers... more
9
Totally revised in 2017 Sacma Model SP25 4D Progressive Header, Serial No. 39AN79, Built 1977 Specifications: Cutoff Diameter - 12mm Blank Length - 100mm Cutoff Length - 130mm 125 Pieces Per Minute Equipped with: Bushing Cutoff, PKO and Straight Across Transfer with Finger Mugaa8 Opening Cam Electrical Equipment and Controls: AC Motor and Controls Weight - 10 tonnes Machine can be seen in use. more
15
Spindle diameter 110mm Spindle traverse 800mm Head stock vertical traverse 1500mm Column horizontal traverse 4200mm & Cross Traverse 400mm Spindle Speeds 7-1000 rpm Feed rate 0.03-12mm Per Minute Spindle bore 50 int Input 380/3/50 ac 15 hp Bcieyjyrkc Fitted with 3 x 820mm x 725mm x 750mm Box Tables, 1 x 4000mm x 1500mm Floor Plates, 1 x Off Set Milling Head with 50 int Taper Nett weight actual. 18 ton / 18,288 kgs more
3

boring head WOHLHAUPTER UPA 4

Mönchengladbach, GermanyGermany dealership location
6371 km
used
diameter:400 mm tool adaptor: 50 F3ftzlo2g Weight:12 kg slide adjustment:52 mm feeds:0,02 - 0,24 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Tool taper:22 mm more
1
WEINIG Planer head Z4, 140 x 260 x 50 mm, aluminium, knives, number: 3, price per piece: €190,00 + VAT Ehdwrdf more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbuud3k2ce SCMI UNO-RCS-37 Wide Belt Sander (2) Heads --Width Capacity: 37": Drum, Combinations Head --Head Configuration: -- 1st Head 5-1/2" Grooved Steel Helical Drum, -- 2nd Head: Combination Style with 5-1/2 " Grooved Rubber Covered Drum 65 Duro and 2-1/4" Platen. --Specifications: Single 24 HP Motor Powers both Sanding Heads. -- Sanding Belt Size: 37" x 60". -- Feed Motor 1 HP 3PH motor Two-Speed Feed: 15 or 30 FPM -- Sanding belt speed 3150 ... more
1
2 heads, fix hole distance 8 cm, Bcvru27azg Drilling range 3 - 14 mm, with table more
15
Spindle diameter 100mm Spindle traverse 800mm Head stock vertical traverse 1500mm Column horizontal traverse 6200mm @ Cross Traverse 400mm Spindle Speeds 7-1000 rpm Feed rate 0.03-12mm Per Minute Spindle bore 50 int Input 380/3/50 ac 15 hp Bcieyahlwb Fitted with 3 x 820mm x 725mm x 750mm High Box Tables, 3 x 2400mm x 1200mm Floor Plates, 1 x Milling Head with 50 int Taper Nett weight actual. 18.1/2 ton / 18,796 kgs more
1

Boring Head UBEKANNT Stützlager

Mönchengladbach, GermanyGermany dealership location
6371 km
used
throat:580 mm tool adaptor:drm. 130 power requirement: kW total power requirement: kW weight of the machine ca.:0,1 t Dnvl9vxdq dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm more
6
throat - mm Ws2xw tool adaptor MT 4.5 ISO 40,50 etc. power requirement - kW turning diameter bis 400 mm weight 7,7 kg more
1

WIDE BELT (4-HEAD BOTTOM & 4-HEAD TOP) D M C POLISAND 130

North Carolina, United StatesUnited States dealership location
518 km
1995
used
Elect./Voltage: 415/460 V, 50/60 Cy, 3 Ph. Glq9p9jl8 DMC POLISAND 130, 4-Head Bottom & 4-Head Top Sanding Line; 52" Width. Head sequence BOTTOM: -- 1st Head: Steel contact roll, 35 HP motor; -- 2nd Head: Rubber covered contact roll, 30 HP motor; -- 3rd Head: Rubber covered contact roll, 20 HP motor; -- 4th Head: Sanding pad (platen), 15 HP motor. Head sequence TOP: -- 1st Head: Steel contact roll, 35 HP motor; -- 2nd Head: Rubber covered contact roll, 30 HP motor; -- 3rd Head: Ru... more
1
Bcvrui0vre 2 heads, fix hole distance 8 cm, Drilling range 3 - 14 mm, base frame w. one drawer more
3
WP swivel knife head LEITZ 50 mm very good condition Diameter 150mm, height 50mm for 30s spindle or recording the cutter was only little used and is in very good condition the blade can be swivelled very accurately from 0 °-45 ° in the grid with carbide indexable inserts 50 x 12 x 1.5 (which in each shop cheap get, there are no expensive special knives) with the cutter you can cut up to 50 mm high and approx. 45 mm deep chamfer from 0 ° - 45 ° and grooves Professional tool, not a hardwa... more
1

Boring Head UBEKANNT Stützlager

Mönchengladbach, GermanyGermany dealership location
6371 km
used
throat:580 mm tool adaptor:drm. 130 power requirement: kW total power requirement: kW Vtx0xrmxr weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m unused spindle support bearing for spindle diameter 130 mm more
1

Miscellaneous Angle Plates 2 off

Sheffield, United KingdomUnited Kingdom dealership location
5781 km
ready for operation (used)
450 x 450 x 1000mm Hpnt00t more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Cw72pumg COSTA KA CCT 1350 3-Head Sander: 52" width cap. and constant pass line conveyor height;Excellent Veneer and Solid wood sander with (2) Contact rolls and (1) Segmented [...] Configuration: -- 1st Head: Rubber covered contact roll, 9-7/8" dia., 35 HP motor. -- 2nd Head: Rubber covered contact roll, 9-7/8" dia. approx. 40 shore covering, 30 HP motor; -- 3rd Head: Segmented finishing platen, electronically controlled narrow segments conform to pan... more
3

Aut. cross cut saw (double angle) H&M HM-Z/N

Hardinxveld-Giessendam, NetherlandsNetherlands
6242 km
2001
good (used)
H&M automatic cross cut saw, type HM-Z/N Hk8xa9gsu manufacture year 2001 Machine specifications: - For straight & (double) angle cutting - Max. workpiece lenght 10500 - Push infeed system - CNC controller - Outfeed table more


angle head
daily

New machines via email!

Stay updated!

to

to

Edit search
ANGLE HEAD
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close