length - 590 mm
breadth-base - 400 mm
Gracj0bfo
height - 485 mm
weight approx. 104 kg
Pressure regulator intermediate plate
-Type: NAVW-3/8-2-ISO 152790
Hhoa3o2eq
-Price: per piece
-Number: 20x available
-Weight: 0.6 kg
Groove size 40
Number of slots 11 x 2
Groove centre distance (mm) 200 / 350
Dimensions WxDxH (mm) 2880X1200X810
Weight of the machine (T) 5
Vuktbm
angle plate appr. 1,250 x 2,550 mm (photo left side)
Vtuzvy
Heavy angle plate
w x h x d approx. incm
120 x 120 x 80 cm
thickness approx. 5 cm
Weight estimated approx. 2 t,
slotted hole
Bjgtwacd7h
Angle plates Angle bracket, clamping plate, clamping cube.
General information / technical data:
Well preserved angle in engineering cast iron with stiffening ribs width: 700 mm
Height: 910 mm
Depth: 600mm
Weight: 450 kg
5 piece horizontally running t slot DIN 650 size 28 x 46
6 piece fastening grooves in the base
X90y7jmj2
Comment / optional equipment:
Clamping surface clean only once drilled (see image)
Broke out of 1 slot on the base (see image)
length - 800 mm
breadth-base - 400 mm
height - 700 mm
welded assembly
weight approx. 90 kg
Yxcrbvwzp
angle plate appr. 2,200 x 3,000 mm (photo right side)
Cicsmbf7s
angle plate appr. 2,200 x 2,900 mm (photo in the middle)
Bpxioolwax
Large cast iron angle plates
8m3cthq
4 - 830 x 1760 x 4550(h) mm
2 - 785 x 2160 x 3650(h) mm
2 - 780 x 2150 x 3670(h) mm
2 - 785 x 1550 x 2450(h) mm
2 - 920 x 1055 x 1865(h) mm
1 - 1020 x 1760 x 3560(h) mm
Number of T slots: 22
Jump from T to T: 125mm
Bhgp3zqgus
T size: 22mm
Number of matching pieces:4
Length: 1.000 mm
Width: 800 mm
Height: 2.800 mm
Weight: 1.400 kg
Please Note: The information on this page has been obtained to the best of our ability and belief from, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise ...
Size LxW: 490 x 1280 mm
Bugz0gmujq
1 pair same angle steel, welded
Technical data:
Clamping area 650 x 1330 mm
Projection rear 600 mm
Ll9j07wz3
used, in good condition
General information / technical data:
Well preserved angle in engineering cast iron with stiffening ribs width: 700 mm
X90whozvs
Height: 910 mm
Depth: 600mm
Weight: 450 kg
5 piece horizontally running t slot DIN 650 size 28 x 46
6 piece fastening grooves in the base
Comment / optional equipment:
Clamping surface clean
Introduced 6 piece threaded holes on the clamping surface
Make
Yop
Dimensions
Length 1450 mm
Coruwr9c
Width 1250 mm
Height 3000 mm
Make UNION
YOP 2014
Technical data
Quantity T-Nuten24
Distance T-grooves/spring290 mm
Quantity/Number of Plate 4
Dimensions
Length 1000 mm
Width 2100 mm
Belxaluyjm
Height 5500 mm
pressure 1645 t
stroke 1000 mm
dayligth 3000 mm
Control
down speed 280 mm/sec
return speed 275/346 mm/sec
distance between columns 2520 mm
total power requirement kW
weight of the machine ca. t
Tgfi9jgz
the machine is in very good condition
machine was overhauled
new control
optional you can buy a shifting table as well
optional you can buy a surrogate column as well
T-slot plate, clamping plate with T-slots, plate field, welding table, welding table
Mwsisezh
-Dimensions: 1500/3516/H260 mm
-Plate thickness: 30 mm
-Plate is: with supporting ribs
-1x T slot: 17 mm
-Weight: 1800 kg
Hydr. guillotine shears PROMECAM / AMADA type GH 630 Z
machine No. Year of construction approx. 1985
cutting length 3050 mm
cutting thickness 6 mm
angle stop front left 1200 mm
Angle fence front right 1600 mm
backgauge 1000 mm
working height 850 mm
hydr. sheet holding down device 16 pieces
stroke rate approx. 18 strokes/min.
hydraulic tank capacity approx. 100 litres
drive power 9 kW
mains connection 400 Volt, 50 Hz
- motorized backgauge with analogue position indicator
- manual cutting gap and ...
pneumatic universal Plate Bender Machine STROBBE 220
Eoarkwhq8
Serial-No. 220157 - Year -
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Ca
sheet width 1520 mm
plate thickness 1,75 mm
upper roll diameter 75,0 mm
lower roll diameter 75,0 mm
work height max. 800 mm
speed 3,2 / 6,4 m/min
total power requirement 1,0 kW
weight of the machine ca. 670 kg
range L-W-H 2350 x 1000 x 1200 mm
Furnishing:
Gxg0ew
- 4-roll bending machine with electric drive
- 2x driven rollers
- 2x speeds
- Upper roller can be swiveled out
- Conical bending device
- Forward and reverse by foot switch
- safety device
plate width 5500 mm
plate depth 2000 mm
plate height 300 mm
weight 10000 kg
2 identical plate fields available (A2018)
Dxxijakx
LxWxH: 5000 x 2000 x 300mm
Area for 2 slab fields: 22m²
Dimension of the T-slots; 36 x 64 mm - height: 45 mm
length 400 mm
Beni7ytdq3
width 270 mm
weight of the machine ca. 0,02 t
dimensions of the machine ca. 0,4x0,27x0,03 m
Clamping plate with T-slots Plate field Welding table Welding table Plate boring mill
-Width: 795 mm
-Length: 2800 mm
-Height: mm
-Plate thickness: 35 mm
-Working height: 960 mm
-Plate with: support ribs
-Groove width: 22 mm
Tmfrybjou
-Dimensions: 860/2870/H960 mm
-Weight: 1470 kg
length 600 mm
width 400 mm
height 100 mm
weight of the machine ca. 200 kg
Nwxld
1
Size L x W x H appr. 1700 x 1000 x 220 mm
Lb8rv0tv
7 T slots with size 36 mm
sheet width 1050 mm
plate thickness 3,5 mm
thickness at "Niro-steel" 2,0 mm
no. of strokes 35 Hub/min
cutting angle 2°30 °
engine output 3,0 kW
table height 810 mm
weight of the machine ca. 1.260 kg.
range L-W-H 1930 x 1960 x 1200 mm
** from a workshop for the disabled - good condition
Furnishing:
- motorized guillotine shears
- manual backgauge with counter
- front sheet metal chute = front sheet metal removal
- rear protective grille
Mvsyx0
- piece counter
- foot switch
plate width 1090 mm
plate depth 1310 mm
plate height 100 mm
weight 1100 kg
Pvlpou
LxWxH: 1090x1310x100mm
Weight: 1100 kg
Length: 1,500 mm
Width: 6002 mm
Height: 91 mm
Pole spacing: 18 mm
Weight: 550 kg
Connection value: 360V / 30A
Bw7ielbfxx
Anchor plate, door holding magnet, door magnet
-Type: ASS 65
Git8hdz
-Number: 3x available
-Price: per piece
-Weight: 0.3 kg
Guillotine shears
Manufacturer: PROMECAM
Type: GH1030Z
sheet width: 3100 mm
Laghhtjy
table height: 855 mm
Guillotine shear version Z (without throat)
With height adjustable throat (see photos)
Dimensions of throat: approx. 1600 x 3000 x 500 mm
Total dimensions: 3400 x 2500 x 2100 mm
Total weight: 9500 kg
sheet width 3700 mm
plate thickness 16 mm
distance between columns 3860 mm
throat 100 mm
back stop - adjustable mm
down holder 12 Stk.
total force of the downholder 24000 kg
oil volume ca. 500 l
total power requirement 30 kW
weight of the machine ca. ca. 11,0 t
dimensions of the machine ca. 4,5 x 2,5 x 2,5 m
Hljty28dg
Max. Sheet thickness stainless steel: 12mm
Cut gap adjustment: 0-16 mm
- Machine has a back gauge adjustable from the front.
- cut line lighting
length 1000 mm
width 1000 mm
Thickness 200 mm
weight ca. 350 kg
range L-W-H 1000 x 1000 x 550 mm
Pui02u
Furnishing:
- JFA degree of accuracy 1
- Support feet
Book back heating plate Schmedt PräPara Typ 3310
En88voldu
Year 2008 - Serial-No. 19
Book block sizes:
Height max. 640mm
Thickness max. 110mm
Floor space 700 x 600mm
Height ca. 400mm
Weight ca. 10KG
Power supply 230 volts / 50 H
sheet width 4000 mm
plate thickness 13 mm
distance between columns 4200 mm
Fn7lthp
throat 310 mm
stroke 300 mm
table width 820 mm
table height over floor 1215 mm
Number of downholders 16 St.
cutting angle 0,5 - 2,5 °
Control
total power requirement 30 kW
weight of the machine ca. 27 t
dimensions of the machine ca. 4,8 x 2,65 x 2,85 m
This machine has a light guard on front side and light sensoric on back side.
Machine has a finished part hold up and transport system. Length of cut and
numb...
Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings
-Connection: 550 x 450 mm
-Connection: Ø 560 mm
-Material: sheet steel
-Dimensions: 1600/660/H800 mm
Infwykx
-Weight: 38 kg
sheet width 3000 mm
plate thickness 10 mm
distance between columns 3100 mm
total power requirement 12 kW
weight of the machine ca. 5 t
dimensions of the machine ca. 4 x 2 x 2 m
Bhhjext0vj
Electrical- hydraulical operated shearing machine with motor driven back stop.
Adjustment of back stop by DRO. Machine works in the swinging beam system.
working lenght:12.000 mm
pressing power:180 t
Punching capacity:1000 kN
cutting capacity:Flach - max. 22 mm
cutting capacity:Winkel - max. 150 x 150 x 15 mm
punch diameter:32 mm
number of punch tools:3 Stk. / pcs.
connected load frequency:3 x 400 V
control:VACON 110
accessories::Zufuhrwagen
Ewx2awkae
accessories::Schleppketten-Quertransport
Voortman V550 punch-shear unit suitable for shearing and punching flat steel and angle profiles.
This low-cost Voortman V550 punch-shear unit has a horiz...
Model 4HEL 2132 - YEAR 2012
HYDRAULIC CNC 4 ROLL PLATE BENDING MACHINE
DUAL INITIAL PINCH PLATE BREBENDING
TOP ROLL Ø mm 320 – LOWER ROLL Ø mm 320
VOLTAGE VAC 400/50 POWER ELECTRIC KW 22
CAPACITY YIELD STRENGTH N/mm² 260
2000X20 MM PREBEND - 2000 X 25 MM ROLLING
INNER DIA. 1.700 mm
---
HALF PLATE WIDTH CAPACITY
1000X24 MM PREBEND -1000 X 30 MM ROLLING
MINIMUM ROLLING DIAMETER 400 MM
DEPENDING ON PLATE THICKNESS AND WIDTH VS. YIELD STRENGTH
LAYOUT MACHINE DIMENSION mm 6....
floor-plate length: 4015 mm
plate width: 2000 mm
plate height: 310 mm
Eqmwiiu
weight of the machine ca.: 5800 kg
Cast steel plates for sale free.
T-slots according to DIN 650
a=25; h=62; b=51; c=25mm
center stand T-slots= 250mm
16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm
i.D.
sheet width 3000 mm
plate thickness 10 mm
distance between columns 3100 mm
total power requirement 12 kW
Gnljf37ds
weight of the machine ca. 5 t
dimensions of the machine ca. ca. 4 x 2 x 2 m
T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table
Tp3otu3jt
-Dimensions: 250/1450/H170 mm
-Plate thickness: 28 mm
-Plate is: with supporting ribs
-1x T slot: 12 mm
-1x: longitudinal groove
-Weight: 156 kg
length 3000 mm
width 1500 mm
table height 210 mm
work height max. 910 mm
Ffhqyl0
weight of the machine ca. 2 t
Base 700 mm
Heavy cast table with ribs and steel frame.
Machine dealer with own stock of 2500 m².
Straightening and welding plate steel is strongly ribbed
Length 3000 mm
995 mm
110 mm thick
Working height 530 mm
Thickness approx. 50 mm
-Height adjustment to the level of the plate on the base
-Metal base with 6 foot rests
Weight approx. 1.8 ton
Hwryi2rpu
good condition
Cutting saw for wood, aluminium and plastic profiles, double mitre saw for special angles from 20 to 135 degrees stepless motorized
A video of the running machine can be sent on request.
Positioning control PCE 5000 with colour screen, for single cuts and program cuts, profile data and cutting data records can be stored.
The machine is equipped with many extras.
cutting length approx. 5100mm with software stop overlength by reaching around
Software stop for short parts
Swivel range from 20 degre...
floor-plate length: 4750 mm
plate width: 1850 mm
plate height: 200 mm
weight of the machine ca.: 5000 kg
Bpltfvve3h
steel plates are available for sale.
T-slots according to DIN 650
a=42mm; b=74mm; h=65mm
distance edge to 1st T-slot = 150mm
distance T-slot to T-slot=310mm
i.D.
plate width 6400 mm
O9qpf
plate depth 1870 mm
plate height 400 mm
T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table
-Dimensions: 620/1560/H260 mm
-Plate thickness: 20 mm
-Plate is: with supporting ribs
Bjz33noni
-1x T slot: 15 mm
-Weight: 360 kg
1
1. panel stacker, manufacturer: Grafoteam, type: Advand PST 360 L, machine number: 21283600270, year of construction: 2013, power: 100 V - 240 V, 0,02 kW, max. panel length: 1.100 mm
Ckospe80