Condition: used, thickness of jaw 160 mm 53 mm clamping width 305 mm clamping capacity 5,7 t weight 60 kg dimensions of the machine ca. 700 x 160 x 145 mm Cobu E Nsp S Dcds Tbjgt

Condition: used, Year of construction: 2004, Irco Breuning Bar Loading Magazine 196.6-3 Year 2004 6 different channel diameters: 16, 22, 27, 32, 37, 42 Csbowam Uheu E N Tbsgt Interface configured for Miyano machines

Condition: good (used), Cast iron clamping cube Length: 1290 mm Width: 920 mm Height: 510 mm T-slots dimensions: 42 x 25 mm 2 faces slotted Weight: approx 1 T Cgobu Esvccf Nj N Tbst

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm Cgebujwag Uhe E N Tbjt -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg

Condition: like new (used), apparently unused collet set, ISO 50 18 pieces Cebu E Newagr Ho Tbegt Collets with clamping range: 5 mm - 32 mm

Condition: excellent (used), Offer: 1 used, very well-preserved Horvath Fischer eccentric chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentric dimension: 25 mm, cylindrical chuck connection with a diameter of 150 mm, with a chuck key and a set of hardened stepped jaws, as well as the assembly and operating instructions for the Horvath eccentric chuck in the presumably original wooden box. Cgebuog Umb Ej E N Tbst (Hahn & Kolb) Year of manufacture unknown, very well-preserved. From our own inventory. Clamping device to facilitate work. Eccentric lathe chuck for clamping and holding the workpiece in a lathe. "Price / details on request." All technical information is subject to typographical errors/mistakes. We sell exclusively to countries within the European Union.

Condition: used, Year of construction: 1971, table diameter 250 mm table height 100 mm 4-jaw-chuck diameter 200 mm weight 60 kg dimensions of the machine ca. 370 x 500 x 210 mm - Serial-No.: 6568 - 4-jaw chuck RÖHM Ø 200 mm - Chuck optionally with 30° pitch, or Csbuetn Envs E N Tbjgt infinitely variable 360° rotation - Chuck key

Condition: used, Clamping angle 1 with 8 T-slots (24/36 mm), 180 mm spacing - With M16 50x50 mm threaded hole pattern Clamping width: 1,500 mm Clamping height: 1,500 mm Depth: 1,000 mm Weight: approx. 2.4 t Clamping angle 2 with 6 T-slots (24/48 mm), 255 mm spacing - With M16 threaded hole pattern, various dimensions Clamping width: 1,500 mm Cgsbjwcdmgju E N Tbet Clamping height: 1,500 mm Depth: 900 mm Weight: approx. 2.4 t In good condition, little used. Technical data without guarantee, subject to prior sale.

Condition: good (used), Steel floor plates Length: 2210 mm Width: 1500 mm Cgobu E Nsv Amdpe Tbet Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 6 same plates available.

Condition: as good as new (ex-display), Year of construction: 2020, operating hours: 10 h, Compact precision small rotary table, suitable for single part or small series production in laser welding precision mechanics. A horizontal or vertical assembly is possible. - Made in Germany - It is particularly suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, slot milling, or for use on a tool or surface grinding machine. Precision worm gear with a reduction ratio of 50:1. Cebu E N Tob Nbpwjbjgt The worm and worm wheel are manufactured in our company, the guarantee for the highest setting precision. The pair is four ball bearings and adjusted backlash free, but adjustable. The stable output spindle is provided with a face plate d=108 mm with inner taper MK 1 and through hole 10.5 optionally M12 internal thread. The electronic control as a handy module with foot switch in clockwise rotation with power supply and emergency stop included in the package.the speed can be adjusted according to the scale of 0-50 min-1. The speed change occurs promptly with the setting when the axis is rotating. The direction of rotation is determined by the foot switch. The right switch makes the axis rotate clockwise, the left switch counterclockwise. When the foot switch is pressed, the axis accelerates to the set speed, when the switch is released, the axis brakes again. Ideal for laser welding for Hermle, Trumpf, Haas, Maho, Deckel FP1, G1 or Gravograph. We can offer you

Condition: used, thickness of jaw 160 mm max. clamping width 240 mm ca. Cgobuev Dxyxe E N Tbot tension force ca. 4,5 to high of jaw ca. 60 mm Dimensions (L/W/H) ca. 550 x 160/250 x 140 mm weight ca. 50 kg High pressure vice with turning plate. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1998, Offer for: 2 flow-through oil coolers - coolant system for machine cooling Two free-standing flow-through oil coolers / flow-through coolers for cooling oil / hydraulic oil from Wöhr Kältetechnik for cooling / temperature control of the coolant circuit or hydraulic system on machine tools, with integrated circulation pump and flow monitor. Control cabinet integrated into the housing with connection cable, LAE MTR11 temperature controller, and potential-free alarm contact in case of fault. Both coolers are in used condition. Cooling unit Wöhr flow-through oil cooler type D 20 V, Year of manufacture 1998, p. no. 98101582, cooling capacity 2 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400 V, 50 Hz, LAE regulator MTR11, with Walter Procon connector plug (cooler was installed on the hydraulic system of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 1.7 kW Flow-through oil cooler D 30 V Wöhr flow-through oil cooler type D 30 V, built in 1998, serial number 98101583, cooling capacity 3.3 kW, refrigerant R 404 a, with integrated circulation pump, operating voltage 400 V, 50 Hz, LAE regulator MTR11, with CEE connector plug (cooler was installed on the grinding oil supply of a grinding machine), dimensions approx. 80 x 75 x 110 cm, total power consumption 2 kW. The oil coolers are in used condition and in good condition. Price/details upon request. Cgebeg U H E Ssu E N Tbet All technical information is subject to typographical errors/mistakes. We only sell to countries within the European Union.

Year of construction: 2020, Condition: used, module 4 diameter 180 mm Bore diameter 40 mm width 67 mm 5 weight 15 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request Cebu Esm Avwzj N Tbogt

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Cgjbujh Auahj E N Tbot Weight: approx 3 T

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 0815, Compact large precision CNC rotary table with control unit, suitable for single part or small series production in mechanical engineering, horizontal or vertical assembly is possible. Cgebuebatame E N Tbet Immediately available - Made in Germany - The dividing head is particularly suitable as 4th axis on engraving and milling machines for milling, engraving, lasering, drilling, grooving or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Extremely precise and accurate worm gear is designed with a maximum reduction ratio of 100:1, which was specially designed by us and is not standard. Output torque far above 70 Nm. The max. clamping diameter is 250 mm. The peak height is 125 mm. The drive is made by a controlled stepping motor of 200 steps with 7,5 A with a holding torque 9,7 Nm. Possible adjustable graduation accuracy at the output: 0,00028125 degrees with 1/64 step programming. The worm pair has four ball bearings and is adjusted backlash-free, also adjustable.the bearings are from FAG/SKF. The one-piece stable output spindle is equipped with a face plate d=200 mm with inner taper MK 3 and through hole 20,3.Weight 26 Kg Accessories: opt. USB-data lever for programming. opt. Sealing air connection. opt. 200mm three jaw chuck opt.guard plate with intgr. sewing switch for auto-operation Quickly are key surfaces, a difficult ska

Condition: new, Functionality: fully functional, 5 collet covers for Ø30 collets, Part No. 314567.00 4 collets Ø 30.0 1 support sleeve for Ø30 collet Cjbu E Newccp Hj Tbogt - for Reishauer RZ 301 / RZ 362 Price/details upon request. All technical information is subject to typographical errors/mistakes. We only sell to countries within the European Union.

Condition: used, thickness of jaw 160 mm Csber Dwa Rou E N Tbegt 50 mm clamping width 180 mm weight 37 kg dimensions of the machine ca. 450 x 240 x 130 mm mechanical vice in great condition - with crank

Condition: good (used), Electronic length stop BOMAR type ROLBO Useful length: 3000 mm Useful table width: 330 mm tAdjustable heigth from 500 mm to 1100 mm Total table length: 3450 mm Cebu Esi Dpapo N Tbsgt 8 memory lengths possible Voltage: 220 V mono

Year of construction: 2020, Condition: used, module 10 diameter 180 mm Bore diameter 40 mm Cgobu Ejm Avwwo N Tbjt width 75 mm 2 weight 14 kg Milling cutter is as new, without signs of use Other used rack and pinion group cutters up to module 10 on request

Condition: good (used), Steel Plate Length: 3800 mm Width: 1400 mm Thickness: 130 mm 17 T-slots Cgsbsu Szupsu E N Tbjt T-slots dimensions: 42 x 27 mm x total height 40 mm External Slots spacing: 300 mm Internal Slots spacing: 200 mm Holes diameter: Ø 40 mm Weight: 5 T

Condition: used, thickness of jaw 160 mm 54 mm clamping width 315 mm clamping capacity 2,0 t weight 60 kg Cgjbujp S Dcho E N Tbot dimensions of the machine ca. 550 x 250 x 140 mm

Year of construction: 2015, Condition: used, Electronic length stop BOMAR type ROLBO Year of construction: 2015 Csbu E N Tjwa Rk Hebogt Useful length: 4000 mm Power: 0,06 kW In good working condition Voltage: 220 V mono Dimensions (L x W x H: )4500 x 600 x 1000 mm Weight: approx 150 kg

Condition: used, length 500 mm width 390 mm height 630 mm T-slot - width 22 mm T-slot - distance 125 mm weight of the machine ca. 175 kg dimensions of the machine ca. 500 x 390 x 630 mm Cobu E Netn En Ds Tbsgt

Condition: used, 3-points Steady Ø 350 mm for SCULFORT Lathe Centre height: 550 mm Cobujv Hxxye E N Tbjgt Maxi diameter: Ø 350 mm Distance between fixing V: 350 mm Width: 1200 mm Thickness: 300 mm Total height: 1300 mm Weight: approx 250 kg

Condition: used, Touches 3-points Steady for SCULFORT Lathe Centre height: 550 mm Maxi diameter: Ø 800 mm Base dimensions: L 635 x W 300 mm Distance between fixing V: 480 mm Width: 1600 mm Thickness: 350 mm Total height : 1500 mm Weight: approx 250 kg Cgebu Eev Hxv Ee N Tbst