Cast iron clamping cube

Cube de bridage 1290 x 920 x 510 mm

Year of construction: 2025, condition: new, ⭐️ Four-Post Car Workshop Lift ⭐️ TM-GROUP 4SF-4000B 4 Tons Automatic FOR WHEEL ALIGNMENT / FOR GEOMETRY HIGH-QUALITY OIL AND INSTALLATION KIT INCLUDED FREE Specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 4 tons ✅ Type: Automatic ✅ Connection: Bottom ✅ Power supply: 400V (optional 230V) ✅ Lifting time: 60 seconds ✅ Lifting height: 1750 mm ✅ Limit switch: Yes ✅ Motor power: 2.2 kW ✅ Telescopic rolling jack arms, allowing lifting of the vehicle also under the sills ✅ Expansion plates (with locking option) ✅ Turntable slots ✅ Self-lowering ramps ✅ Automatic locks lowering to create a blocking threshold for the vehicle ✅ Anchors included: Yes ✅ Hydraulic oil 10L: free ✅ Meets requirements for UDT certification: Yes ✅ Ramp length: 4250 mm ✅ Ramp width: 918–1118 mm Is this lift for me❓ The automatic four-post lift is suitable for servicing almost any passenger car, from a 2-door coupe to large 4x4 off-road vehicles. The 4000 kg (4T) capacity also allows lifting smaller delivery vans. Rjdpfsw Ta I Tex Adaon The lift ensures full service and repair capability for vehicles of larger dimensions and weight. What about the repair range❓ Our lift is perfect for work related to wheel alignment and geometry, suspension repairs, as well as engine or gearbox servicing. The high lifting (175 cm to the tire base – practically higher by half the wheel diameter) allows for any inspection. Documentation: The lift is delivered with the necessary documentation: ✅ Declaration of conformity with CE certificate ✅ User manual in English ✅ Automatic rolling jack FREE❗

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Control: Mazatrol M Plus Travel paths: x-1660 y-760 z-660 mm Rsdpfxovrxd Ho Adaon Clamping surface to spindle head: 155 – 815 mm Distance from column to spindle center: 808 mm Spindle inner taper: SK 40 Tool changer: 24 – compartment Spindle speeds: 7000 rpm Usable table area: 2000 x 760 mm Table load: 1000 kg Rapid traverse x, y axis: 24000 mm/min Rapid traverse z axis: 20000 mm/min Feed: 1 – 5000 mm/min Machine weight: approx. 8700 kg including chip conveyor, coolant system The machine can be inspected under power.

Condition: used, Clamping plate, marking-out plate, measuring plate, measuring table, welding table, welding table, straightening plate Redpfsfc T Tqsx Adaen -Clamping plate comes: from a measuring machine -Width: 1335mm -Length: 3000mm -Height: 250mm -Plate thickness: 40 mm -Plate is with: support ribs -with: 4x adjustable feet -Number: 1 piece available -Transport dimensions: 3000/1335/H750 mm -Weight: 2749 kg

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Redeb Ez R Uspfx Adaen Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 16 m/min, controller model: OKUMA-OSP-HMI, table width: 850 mm, table length: 2,200 mm, table load: 2,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, spindle nose: BT 50, number of spindles: 36, number of slots in tool magazine: 36, tool length: 400 mm, tool diameter: 120 mm, tool weight: 20 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Redsu Dinkjpfx Adaon

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. Rsdpfx Adeuxqzueasn (Inquiries will only be answered with your address and telephone number).

Year of construction: 1987, condition: excellent (used), machine/vehicle number: 31700987, Technical data Manufacturer: Stiefelmayer Type: SMM-C Year of construction: 1987 Redpfxsfd Dr He Adasn Measuring range X: 2500 mm Y: 1000mm Z: 1200mm Miscellaneous Measuring counter: MZ200 (retrofit in 2014) Column cross-section: 100 x 100 Cross section cross arm: 60 x 60 The machine can be upgraded with new accessories according to customer requirements. Price: on request! Assembly and commissioning possible! We would be happy to provide you with a detailed offer! Please note: Our offer is directed exclusively to professional customers! (Changes and errors in the technical data, information and prices as well as prior sale reserved)

Condition: excellent (used), Technical data Type: AMS 18/21 Manufacturer: Zett mess Very good condition Measuring plate X = 5500 mm Y = 2500 mm Z = 300 mm With Trestles Measuring range X = 5000 mm Rsdjdut Ucspfx Adajn Y = 1500 mm Z = 1800 mm Setup and commissioning by our service partners possible. Price: On request Setup and commissioning possible! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm Rsdowkbcbopfx Adajn - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1995, Swivel spindle: Yes -5 to 45° Height adjustment: Handwheel Swivel adjustment: Handwheel Milling jaw adjustment: manual Height display: mech. counter Swivel angle display: mech. counter Milling stop display: mech. counter Redpfouzkwzox Adaon Milling spindle diameter: 30mm / new milling spindle Speeds: 3000, 4500, 6000, 9000 Motor power: 5.5 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2000mm Machine depth: 1400mm weight: 900kg