Used accessories and spare parts for milling machines for sale (281)

Condition: good (used), Universal milling angle head, milling angle head -Recording: MK4 -Drive mount: MK5 -Angle head: swiveling -Dimensions: 440/300/H310 mm Isdpfsc Sc Ikjx Ag Ijib -Weight: 68 kg

Condition: good (used), Universal milling angle head, milling angle head Iijdpfob A Nu Rox Ag Isb -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages Ijdoxddwrjpfx Ag Isib - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Year of construction: 2018, condition: excellent (used), Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ijdpfxjyf Dp Ej Ag Isib

Condition: good (used), Transport shots, crane shot -Spare part: from a machining center, manufacturer Sigma, type Mission 5 Iiedecnf E Uopfx Ag Isb -Hole: Ø 140 mm -Recess opening: Ø 80 mm -Bolt circle: Ø 110 mm -Quantity: 4 pieces available -Price: complete -Weight: 23 kg

Condition: used, A large selection of SK40 tool holders, including mounted milling cutters, drills, and threading tools from workshop/industrial inventory, is available for sale. Mainly available: * SK40 shrink-fit holders * SK40 collet chucks / ER holders * SK40 tapping chucks * SK40 screw-in holders / Weldon holders * Various special adapters and milling heads Some holders are already equipped with: * Solid carbide end mills * Thread milling cutters * Thread taps * Drills * Face mills Various manufacturers, diameters, and designs available. Condition ranges from very good to used. ❗ Prices vary depending on the holder, tool, manufacturer, and condition. Therefore, please provide specific inquiries including: * Desired holder * Diameter / type * Ideally with a marked image or screenshot 📍 On-site inspection is expressly preferred to avoid any mix-ups and to allow direct inspection of the tools. Iiedey Rmfhopfx Ag Iob

Condition: good (used), Main spindle with drive motor, universal milling head, milling chuck, milling extension, angle milling head, top slide, top slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper tool slide from Mikron VC500D CNC milling machine -Motor: INNDRAMAT 165V 5.5 kW see photo type plate 100C-B050B1-AS03 -Speed: 1500/8000 rpm -Spindle head: SK40 mount Isdey H Ivmepfx Ag Isib -Dimensions: 910/1120/H510 mm -Weight: 365 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm Iiodpfx Agoy H Itre Isb -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Deckel MAHO, milling machine table T-slot table from CNC machining center -Table surface: Ø 800 mm -T slots: Slot width 14 mm, slot spacing 63 mm -Transport dimensions: 800/800/H300 mm -Weight: 355 kg Iodpfx Agey H Itlj Ioib

Condition: excellent (used), Year of construction: 2011, DRLTS 3000 x 2500 Table dimensions (L x W): 3,000 x 2,500 mm Overall dimensions (L x W x H): 6,374 x 2,500 x 1,200 mm Payload: 60,000 kg Motor speed linear unit: 2,500 rpm Power consumption: 35 kW Year of manufacture: 2011 Weight: 26,000 kg Iiedpfx Asyqwxdog Iob

Condition: good (used), Tool holder for SK 40 chucks -made from: Polypropylene copolymer Iodedm Supopfx Ag Ieib -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price: complete

Condition: used, Universal boring head STANKO Spindle tool, spindle head Tool holder: SK 40 - M16 Adjustment bushing holder: Ø 36 mm Adjustment range: 17.5 mm Iedpfsxciv Dsx Ag Ijib Adjustment accuracy: 0.01 mm Tool shank: Ø 18/22 mm Machining diameter: approx. 10-45 mm - Adapter SK40 to adjustment bushing Ø 36 mm - Boring head with adjustment bushing shank Ø 36 mm Net weight: 5 kg Very good condition

Condition: used, diameter div. number 44x Iiodpfx Agoxyzxfo Iob tool adaptor SK 40

Condition: used, diameter div. number 36x Iodpoww Nb Ejfx Ag Ieib tool adaptor BT 40

Condition: used, diameter div. Iiodpfxeww Nbxe Ag Isb number 40x tool adaptor BT 40

Condition: used, diameter div. number 40x tool adaptor BT 40 Iisdpsww Nbfefx Ag Isb

Condition: used, diameter div. number 56x Ijdpfxswtrzys Ag Ieib tool adaptor BT 40

Condition: used, diameter div. Iiedjwtrztjpfx Ag Iob number 16x tool adaptor SK 50 Tool Package DS SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: used, diameter div. number 36x Iiedpfx Agjwtrzgj Iob tool adaptor SK 40

Condition: used, Universal facing and boring head WOHLHAUPTER type UPA 3 Spindle tool, spindle head (suitable for DECKEL) Manuf. No. 40769 Tool holder: MK 4 - S20x2 Tool holder: SK 40 - S20x2 Shaft tool holder: Ø 18 mm Adjustment accuracy: 0.01 mm Iiedpjy Ehyiofx Ag Ieb - with adapter sleeve MK4 to SK40 - Accessories as shown - Storage case Net weight (spindle head only): 2.8 kg Weight with storage case: 6 kg good condition

Condition: good (used), Execution : . Iisdpsy Hdnfsfx Ag Ijb - Clamping surface D = 400 mm - Overall height 196 mm - . - 3-jaw chuck TOS , D = 250 mm , very good condition .

Condition: good (used), Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 160 mm -Type: 34-14M-85 - Pitch: 14 mm / belt width approx. 85 mm -Receptacle: Taper clamping bushing optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 160 x 100 mm -Weight: 7.5 kg Iiedpfxepul U Ho Ag Isb

Condition: good (used), Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 192 mm -Type: D TB 32-8M-20 -Material: Steel -Number of teeth: 32 teeth / Belt width: 20 mm -Mount: Optibelt 1610-19 taper clamping bushing Ø 19 x 28 mm -Quantity: 3x timing belt pulleys available -Price: per piece -Dimensions: Ø 87 x 28 mm Isdpfx Asy Aklvjg Ijib -Weight: 0.8 kg/pc.

Condition: excellent (used), ///// PRICE LISTED PER 1 PIECE ///// Manufacturer: ALGRA Type / markings: D3A030012/0 21-451-003 D3A030011/6-3 23-1151-012 I am offering ALGRA drive gearboxes used in metalworking machines. These components serve the function of power transmission and feed rate adjustment, most commonly used in: - conventional milling machines - machining centers - industrial machines as drive modules Robust, heavy-duty construction – typical components for continuous industrial operation. ⚙️ Technical condition Condition: used Show normal signs of use Mechanically complete Knobs and mechanisms operate correctly Possible storage marks 📦 Included ALGRA gearbox (exactly as shown in the photos) 📏 Application Iisdpfx Agjyz A U He Iob - feed drive for X/Y/Z axes - machine tool gear systems - spare parts for milling machines and industrial equipment - maintenance / machine servicing ℹ️ Additional information Markings stamped on the housings (visible in the photos) Inspection plates "QS-IN PRÜFUNG" Oil-filled design (sealed gearbox) Possibility to sell individually 🚚 Shipping Shipping via courier or on pallet Personal collection possible

Condition: good (used), Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slotted screws, T-slot nuts -Clamping tool: Clamping screw set with storage box -Type: various designs, see photos -Thread: M20 -Price/Fee: complete -Box dimensions: 380/315/H60 mm Iijdeu Npgwopfx Ag Iob Total weight: 11.7 kg