Other

Werkzeug- / Tool Package LK 3 40x BT 40

Condition: excellent (used), Year of construction: 1997, BAZ Fanuc Robodrill14 i XYZ: 500/380/300 8000 rpm Gedpfx Ajx Ncv Togfjua Fanuc 16 M Accessories: 3 x face mill holders 4 x drill chucks 1 x MK2 holder 3 x collet holders 2 x 10 mm Weldon 3 x 6 mm Weldon 1 x CNC rotary table Fibro 150 Documentation

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Gedpfouxrv Hex Agfeua Technical data shown on pictures.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings • SD memory card I/F + USB memory I/F • 1 Set of control keys • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment Gjdpfx Asx D R Svsgfoua • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit - Milling unit - Fine trimming unit Guedpfx Aod Inktjgfja - scraper - buffing unit

Condition: used, Year of construction: 2020, Technical details: x-travel: 1530 mm y-travel: 530 mm z-travel: 465 mm side by side, right side fixed table X =: 925 mm side by side left side 2 axis table X =: 780 mm control: Heidenhain TNC 640 tool magazin:: 122 SK 40 spindle turning speed - stepless: 12.000 1/min Spindle Torque: 120 Nm power capacity: 22 kW Fixed Table Dimensions: 920 x 540 mm Table load fixed table: 2000 kg Max. parts size on fixed table: 900 x 500 x 400 mm Diameter of integrated 2-axis rotary table: 650 mm Table load rotary table: 500 kg Gsdjyqyfgspfx Agfsua B-axis swivel angle: -90°/+110° ° / deg Max. parts size on rotary table: 600 x 500 x 400 mm Max. Parts size over both tables: 1500 x 500 x 400 mm internal coolant system feed: 70 bar bar weight of the machine ca.: 10,5 t dimensions of the machine ca.: 3,65 x 2,53 x 2,81 m Accerories pendant hand wheel HR 510 FS Rotoclear window Automatic machine switch off after prog. cycle end Measuring probe for work piece Blum TC 52 Coolant gun The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new, in excelllent condition. 122 tool holdersr SK 40 come with the machine. A special vice from Gressel for 5-axis machining for the rotary table also comes with the machine. *

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Center height 210 mm Swing diameter over bed: 420 mm Swing diameter in bed bridge: 580 mm Swing diameter over cross slide: 250 mm Center distance: 1000 mm Spindle nose: D1-6 Speed: 45 – 1800 rpm (16 steps) Spindle bore: 52 mm Feed length: 0.05 – 1.7 mm/revolution (17 steps) Cross feed: 0.025 – 0.85 mm/revolution (17 steps) Metric threads: 0.2 – 14 mm (39 steps) Whitworth: 2 – 72 TPI (45 degrees) Module thread 0.3 – 3.5 MP, (18 steps) Tailstock sleeve diameter D50 mm Tailstock sleeve travel 120 mm Tailstock taper MT4 Power 3.3 kW/400 V Machine weight 1270 kg Dimensions (L x W x D): 1940 x 850 x 1320 mm Accessories - 3-axis digital measuring system - Steady rest - Traveling steady rest - 3-jaw chuck mounted, D200 mm Gjdpfx Aex Rt Eusgfoua - 4-jaw chuck D250 mm - Chuck guard with safety switch - Rear splash guard - Tailstock - Cooling water system - Chip tray - Tool holder guard - Longitudinal travel stop - Halogen work light - Emergency stop button - CE marking - Machine documentation The machine is a brand new showroom model and has 0 operating hours. It comes with a 12-month spare parts warranty.

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm passage to the back 590 mm Gsdpfx Aevuun Tjgfeua dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm Gedpfx Agshlnzkofoua transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm Godpfjxyaf Dsx Agfjua z-axis 1.000 mm solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2007, operating hours: 73,090 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 21 kVA, controller manufacturer: Siemens, controller model: 840D powerline, table width: 380 mm, table length: 500 mm, overall weight: 6,500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 24,649 h, number of slots in tool magazine: 30, input voltage: 400 V, number of axes: 5, Equipment: chip conveyor, For sale is a machining center from manufacturer Deckel Maho, model DMU 50, in well-maintained and technically flawless condition. The machine has been serviced regularly and is in excellent condition both visually and mechanically. It is fully operational, tested, and ready for immediate use. Additional equipment: - Paper band filter - Coolant system With our all-inclusive package, we personally handle the complete service for you upon request – from delivery to the commissioning of your new machine. This includes unloading, placement, and alignment of the machining center. Afterwards, our experienced service technicians carry out professional commissioning, perform all necessary function tests, and ensure your machine operates reliably and precisely. Furthermore, we offer tailored training sessions for your employees so that you can maximize the potential of your machine from day one. Even after installation, we remain at your service—be it for maintenance, technical questions, or future upgrades. With our all-inclusive package you have nothing to worry about – we ensure everything runs smoothly so you can focus entirely on your production. Optionally, you can also purchase extraction systems, attachments, and accessories from us – including high-quality Donaldson extraction units – to make your production even more efficient and clean. Our service promise: Quality, expertise, and customer satisfaction are our top priorities. Our team consists of qualified and experienced technicians, specializing in Mazak machines as well as other brands. We place great value on personal support and continue to assist you even after the purchase. You are also welcome to inspect and test the machine under power at our facility at any time. We cordially invite you to visit us and see the condition and functionality of the machine for yourself. With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG Guodpfx Agoxwtp Rsfja All information without guarantee.