Used Wire Stripper for sale (3,482)

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled Itodpowrrp Usfx Affjr -Type: lCK98A -Dimensions: 660/390/H350 mm -Weight: 23 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Ijdpfovdu Hzex Affotr Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation.

Condition: excellent (used), For sale: a set of 3 professional AMP / TYCO Electronics handheld crimping tools for industrial, automotive, and workshop applications. Original tools with EDB Electronic service documentation – each dedicated to a specific range of wires and contacts. Itsdjw Svapepfx Affjr

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Iodpfx Afjx Hadvofjtr Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: used, Year of construction: 2005, Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000. Iedox E Ulxepfx Affjtr

Condition: used, Year of construction: 1999, max 70 mm hydraulic ja Itsdpfx Aew Sygasffjr

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: compressor, cooling unit, documentation/manual, fridge, EDM (Electrical Discharge Machine) Itjdpfxjx A Atie Affsr Brand: Sodick Model: AQ325 Year: 2000

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Itjdpfx Afsvq Rh Uofer Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price greatly reduced.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Maximum workpiece dimensions: 960mm 670mm 245mm Itsdpfox Ekcyjx Affsr Maximum workpiece weight: 850 kg Capabilities: Angular wire cutting (based on 3D models) Additional features: Automatic wire feeding (AWF) Immersion in dielectric fluid

Condition: good (used), Year of construction: 2001, The machine is in good working condition but needs some maintenance. Itjdpfx Aex Ec S Djffjr

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: D12L/8271, Offer Number: D12L/8271 Machinetype: wire nail press Make: WAFIOS Type: N51 Itodpfx Afewi Tgiofjr Constr. year: 1984 diameter range: 2,2-4,2 mm nail length: 13-105 mm output - pieces/min: 430 Location: In our warehouse

Condition: used, wire diameter - max. 10 mm wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m Ijdpfx Aewu Hg Heffetr

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1951, Straightening machine with 4 straightening lines for wire diameters of 8, 10, 12, and 14 mm. Electromechanical drive of the feed rollers and rotating straightening units. Cutting device with automatic imprinting of the manufacturer's identification. Electronic length measurement with rotary pulse encoder. Parallel drive of the straightening lines is possible for 8–14 mm diameter (up to 3 lines max). Control panel with switching and monitoring functions. Program control via SPS Simatic S5. Bar run-out track with a length of 14 m, equipped with 4 collection troughs for wire diameters of 8, 10, 12, and 14 mm. Wire feed consists of 4 wire decoiling reels, pneumatically braked and controlled, for coil weights up to max. 2,500 kg. Itsdpfx Aow Rvg Tsffsr

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes Isdpfx Aovt Ec Seffotr - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm Itedpovc Akljfx Affor dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Year of construction: 2001, functionality: unexamined, used in good condition Itjdpfxsx D Uvxs Affer

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Itjdpfex Ea E Iox Affsr Constr. year: 1981 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Ijdpfx Afsx Dit Sofotr Fanuc 310 iS-WA CNC X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Paths Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Isdpfsxqallox Affetr Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Maximum manual speed: 15 mm/s Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation

Condition: used, Steel wire ropes, lifting slings made of steel Length: 10 m Iedpfxegzpw Ie Affotr Diameter: 25 mm Loops right/left Load capacity: 5 t 6 pieces available 161225ä

Condition: new, The Neospark T 500 is an advanced Wire Cut EDM machine from the renowned brand KNUTH, known for its precision and efficiency in electrical discharge machining. This high-performance machine is ideal for companies specializing in mold and tool making, providing exceptional cutting capabilities for electrically conductive materials, especially when separating 3-D printed components from their base plates. The Neospark T features a rigid cast-iron frame with precision-machined surfaces, ensuring permanent mechanical precision through its advanced linear guides and preloaded ballscrews on all axes. Operating costs are notably low thanks to its cost-effective design, while the user-oriented IPC-based 4-axis control system enhances process reliability. Moreover, it includes a specialized aluminum cutting function that extends wire life and minimizes the risk of breakage during machining. With features like a central lubrication system, easy setup via handheld controls, and integrated CAD/CAM software, the Neospark T 500 is a robust choice for professionals seeking efficient and reliable Wire Cut EDM solutions. To explore this product further, request a quote today. Itjdpfewt Du Ssx Affsr

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Iedpfx Afexyyrqofstr

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, *Black Week Special Offer until 28.11.2025* AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes control console with USB port Itodsxyxfpepfx Affor The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered upon request.

Condition: used, Year of construction: 2019, Wire EDM Machine Ijdpfjxpfy Sox Affstr Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in the X/Y axes Linear scales in X/Y axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler tä161225

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, GF AgieCharmilles Progress VP2 Year of manufacture: 2011 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator with power module AGIEVISION 5 control system Ijdpoxyw Ebofx Affjtr Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after order intake. A test cut with optimal surface finish is performed prior to acceptance. You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.