Wire eroding machine

Mitsubishi MV 2400 S

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Nwodpfx Afozuvyaj Sol Year of manufacture: 2014, available from the end of August.

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Nodpet Hwt Ssfx Af Sswl Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, overall weight: 3,500 kg, number of axes: 5, This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Additional equipment • Cooling/Temperature Control: Cooling system with temperature regulation • Generator: Transistor pulse generator • Output Current: 50 A • Generator Size: 600 x 650 x 1765 mm • Generator Size: 600 x 650 x 1765 mm Machine Benefits Technical Machine Benefits • Maximum machining angles / height: 15° / 260 mm • Maximum workpiece size: 1050 x 820 x 305 mm • U-shaped table dimensions (w x d): 840 x 560 mm • M8 mounting holes: 52 • Wire diameter: 0. 1 – 0. 3 mm • Wire coil weight: 10 kg • Automatic wire threading and wire cutting: included • Tank capacity: 860 liters Nedpfex D Rqfex Af Sjwl • Filter rating: 3 µm • Filter system: dual system // filter system weight: 350 kg Extra Information Controller Inputs: Keyboard, USB, Memory Stick, Ethernet Display: 15" TFT Touchscreen Positioning Accuracy: 0.1 µm Minimum Incremental Movement: 0.05 µm Maximum Programmable Size: ± 99999 mm Software: ADVANCE Plus with 3D CAD/CAM, 10 GB Memory, and Clear/Intuitive Layout Remote Communication Ready: mcAnywhere Graphical Views: 3D, Front, Side, Top Machine Benefits ODS Optical Drive System Tubular Direct Drives on X, Y Axes Linear Scales on X, Y Axes Intelligent Automatic Wire Threading System Dry and Underwater Operation Capable Wire Straightening System Automatic Hole Detection 3D CAD/CAM Control System 5 Controlled Axes + Prepared for Additional Axes Precise Finish Circuit (PFC) Machining Long Life System (LLS) Design U-Shaped Hardened Segmented Clamping Table Compressed Dielectric (Water) Cooling System Remote Communication Ready (mcAnywhere) CE Version 30°/45° Wire Cutting Capability E.KO Ionizer 1501 Dimensions Machine Depth 2687 mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2752, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 400 mm Travel range Z-axis: 310 mm Travel range U-axis: ±75 mm Travel range V-axis: ±75 mm Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions: 1,050 x 820 x 305 mm Max. workpiece weight: 1,500 kg Table dimensions: 840 x 560 mm Table design: U-shaped Taper angle: max. 15° Taper angle at workpiece height: max. 260 mm MACHINE DETAILS Dielectric tank Tank capacity: 860 l Nsdpfx Afsy I Uvco Sewl Filtered particle size: 3 µm Water purifier: 10 l Dry weight: 350 kg General power supply: 13.5 kVA Air pressure: 0.5 - 0.7 MPa Air consumption: 75 l/min or more Dimensions & Weight Dimensions (W x H): 2,022 x 2,150 mm Weight: 3,500 kg

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Nwedpsi A Ix Hjfx Af Sol

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 1,000 mm, table length: 4,200 mm, RepairFIT by Dornhöfer The difference. Includes installation & commissioning! KEY TECHNICAL DATA Year of machine construction: 2007 Capacities / Travel: Longitudinal (X): mm 4,000 Nedpfx Aoy T Elljf Sowl Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Table size: Length: mm 4,200 Width: mm 1,000 Width of T-slots: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool interface: ISO 50, DIN 69871 AD Drawbar: DIN 69872 Form A Main drive: Drive power: kW 30 Spindle speed range: Spindle speed: min-1 20-3,000 Feeds: X, Y and Z axes mm/min 2 – 12,000 Max. rapid traverse speed: X, Y and Z axes mm/min 15,000 Weight: kg approx. 22,000 HEIDENHAIN iTNC 530 Automatic MTE milling head, diagonal Coolant system RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are sourced by us after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and errors were professionally repaired by our expert service team.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller model: Heidenhain iTNC530, table width: 960 mm, table length: 600 mm, overall weight: 9,000 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 22,800 h, spindle nose: HSK E 40, number of spindles: 1, number of slots in tool magazine: 38, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This machine has been used exclusively for copper processing. The coolant water supply is present but has not been used to date. In other words, a superb machine that has always done very light machining, has never seen coolant, and is equipped with a Weiss spindle running at 40,000 rpm. The machine comes as standard including: - Original documentation for the machine and the Weiss spindle - BLUM tool laser Nsdpexgukbofx Af Sowl - Heidenhain TS-440 3D probe - Spindle and emulsion cooler - Lockable roof (harmonica style) The machine can be inspected under power by appointment.

Condition: new, Year of construction: 2026, load capacity: 3,500 kg, lifting height: 5,000 mm, free lift: 5,000 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,550 mm, motor manufacturer: Yunnei EUR5 2,7L, fork length: 2,000 mm, overall weight: 4,400 kg, empty load weight: 4,400 kg, total height: 2,550 mm, total width: 1,800 mm, color: blue, Equipment: CE marking, air conditioning, all wheel drive, cabin, fork extension, front guard, lighting, pallet forks, sideshift, trailer coupling, I have a 3.5T rough terrain forklift for sale with a permanent 4x4 drive. EUR5 Yunnei DEF20CAF4 Dieselmotor 55kW 75KM Air-conditioned cab The truck is equipped with: - Triplex mast, 5m lift height - Fork side shift - Fork positioner - Carriage width: 1500mm - 1220mm long forks - Additional 2000mm long forks included - Pneumatic tires, size: 20.5/70/16 Truck dimensions: 370cm long, 180cm wide, 255cm high Truck weight: 4400kg option to purchase a 1800mm wide hydraulic bucket Nwodsxa Anhopfx Af Ssl as a direct importer, we provide access to spare parts !!! Forklift price: 19800 EUR EXW PayPal payment available

Condition: new, functionality: fully functional, Year of construction: 2026, The CORMAK 2T gantry crane is a robust and reliable industrial machine designed for intensive operation in production halls, workshops, warehouses, and other industrial facilities. With a load capacity of up to 2000 kg, a durable construction, and a mobile frame equipped with swivel castors, it enables safe and precise lifting and transport of heavy structural elements, machinery, and materials. Nedporidh Njfx Af Sowl Main Features and Advantages 2-ton load capacity – ideal for lifting heavy loads in industrial applications. Adjustable working height from 2400 to 3600 mm – allows adaptation to different types of facilities and projects. Double T-type supporting beam (100 x 180 mm) – increased stability and the possibility of installing chain or wire rope hoists. Mobility – four swivel castors with parking brakes ensure easy movement and secure positioning at the workplace. High torsional resistance – reinforced steel construction with additional supports ensures rigidity under load. Safe height adjustment – carried out using a lever and two locking screws on each support. Professional Industrial Construction The CORMAK 2T model was designed with efficiency, durability, and safety in mind. The construction based on a double T-type load beam allows the installation of various lifting accessories, including chain hoists and electric winches. Durable travelling wheels ensure quiet and smooth operation even under maximum load, while parking brakes guarantee stability during loading, assembly, and maintenance operations. The gantry crane can be quickly moved along the designated working area or relocated to another part of the facility. Thanks to its high mobility and structural rigidity, it is suitable for many industries, including heavy industry, construction, repair workshops, and logistics centres. Versatility and Upgrade Options The crane can be equipped with additional accessories such as pulley blocks, chain hoists, or wire rope hoists, allowing more precise and controlled handling of loads. It is ideal for tasks such as: Loading and unloading machinery and industrial components Assembly of steel and structural elements Moving heavy parts in repair workshops Service, maintenance, and assembly work in construction applications Standard Equipment Steel frame with adjustable height Double T-type supporting beam: 100 x 180 mm 4 swivel travelling castors with brakes Robust supports with safety locking system Reinforced torsion-resistant construction A Professional Solution for Your Facility The CORMAK 2T gantry crane guarantees reliability and safety when working with heavy loads. It is an investment that improves efficiency and precision in applications where standard lifting solutions are insufficient. The possibility of adding lifting accessories allows the machine to be easily adapted to specific production, maintenance, or assembly requirements. Note: The gantry crane is sold without a hoist – photos are for illustration purposes only. Technical Specifications Parameter Value Load capacity 2000 kg Double T-type supporting beam 100 x 180 mm Height adjustment range 2400–3600 mm Overall width 2360 mm Weight 168 kg

Year of construction: 2005, condition: used, X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additional cabin door on the right, 80l coolant system, coolant/compressed-air switching, flushing gun, oil pan drawing, MDE interface (machine on, machine running, piece counter), documentation in German, 3D machine model for kinematic simulation in the CAM programming system (IGES, STEP format), numerous SK40 tool holders (DIN 69871), Heidenhain TS641 infrared touch probe, electronic handwheel, additional V24 RS232 interface on the control cabinet. An on-site inspection is possible. Njdjzxr Rcopfx Af Sewl