Cable stripper, cable stripping machine,

Jeffra KM1-F

Condition: excellent (used), Surface Planer / Jointer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence with angle, size 1500 x 175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. cutting depth: 8 mm Extraction connection: Ø 120 mm Table height: 860 mm Hydraulic table height adjustment with foot pedal Numerical cutting depth display Noise reduction combs on the cutterhead Star-delta starter Emergency stop button CE marked Including all documentation Knife setting gauge NEW drive belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Chsdpfoy Emf Rox Afgsc Note on used machines: • Errors in technical data and prior sale reserved. • Quoted prices are ex-location, loaded free on truck. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect the machine at its location. • Special agreements are only valid in written form. (We will only respond to inquiries with your address and telephone number!)

Year of construction: 2023, condition: new, functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable. Chjdpfx Ajq E Ti Hefgoc

Year of construction: 2022, condition: new, Cable stripping machine G.R.S. 9 This incredible machine strips 33 meters cable per minute. You need 380 volts and 3 kW, but the processing capacity of about 2 mm to 80 mm, is reasonable. With a mass of 405 kg, you can move the machine short distances on it's own wheels - for longer distances a other transport method is necessary. The criteria for this machine: Very fast and reliable processing of cable thicknesses between 2 mm and 80 mm. Technical Data: Cutting speed: 33 Meter / min. (forward) 23 Meter / min. (backwards) Processing capacity: Ø 2 mm — Ø 80 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 405 Kg Dimensions in cm: 108 × 85 × 120 Color: blue Csdpohpcnqsfx Afgjhc

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: Chsdpfezgx H Hjx Afgjc * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen Chodpjztgl Defx Afgec ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: as good as new (ex-display), functionality: fully functional, TECHNICAL DATA: Technical characteristics NOVA F 520 Working width [mm] 520 Total length of tables [mm] 2750 Input table length [mm] 1550 Output table length [mm] 1200 Knife shaft diameter [mm] 120 Shaft speed rpm 5000 Knife dimensions (4 pcs) [mm] 35 x 3 x 520 Aluminum planer guide [mm] 1200 x 190 Planer guide inclination ° 90 - 45 Working table height from the floor [mm] 845 Exhaust connection diameter [mm] 120 Max. Removal [mm] 8 Engine power kW (HP) 5 (7) ----- Chsdpfx Ajqw Uyfsfgjc Additional built-in options: * Spiral head "XYLENT"

Condition: good (used), Air cooler, evaporator, cold storage, refrigerated container, cold room -Area of application: for connection to a cooling system -Fan diameter: 500 mm -Maximum permissible operating pressure: 8 bar -Permissible operating temperature: 100 °C Cedpfjb Nx Hljx Afgshc -Pressure at sub-zero temperatures: 21 bar / -60 °C -Contents: 13.2 liters -Slat spacing: 7 mm -Number: 2x coolers available -Price: per piece -Dimensions: 1350/740/H700 mm -Weight: 174 kg/piece

Condition: used, Year of construction: 2006, Panel saw Manufacturer: Altendorf Codpfx Afsz E Rnqegohc Type: F45 Year of manufacture: 2006 Technical data Saw blade diameter: max. 500 mm Main motor power: 5.5 kW Scoring motor: 0.75 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: refurbished (used), functionality: fully functional, JMC 200 B Immediat delivery from our possible. Fully serviced. New condition McIntyre’s wide experience in hydraulic equipment manufacture has enabled us to build an 8” shear with a staggering cutting force. Although equipped with only an 8” blade, the high shear force and wide tip to tip opening on the McIntyre 200B means that it can deal efficiently with a whole range of non- ferrous Cjdpfx Ajin N Tdjfgshc cleaning and sizing operations - in particular larger diameter electric cables and valves. In most cases - if your metal will fit into the jaw of the 200B, then this machine will cut it.

Condition: new, Year of construction: 2026, HOFMANN, type AD 635, new surface planer/thicknesser - TERSA cutterhead with 4 knives, - Thickness table adjustment with buttons for rapid or slow feed adjustment, as well as adjustment to within 1/10 mm accuracy, integrated operating hour counter, - Thickness table supported by 4 lead screws and guided on 4 sides - Rubber infeed and outfeed rollers including options: Chsdszyf Tyjpfx Afgsc - Motor power 7.5 kW - Continuously variable feed rate of 4-22 m/min, instead of the 2 feed speeds - Positioning control for AD 635 including sensor monitoring via light barrier - Extension table 630 mm, L = 1000 mm - Telescopic push stick