Used Copper Wire Driwing for sale (3,853)

Condition: good (used), Wire electrode, welding wire, welding wire Isdpfxsimd Sio Ah Nsal -Manufacturer: Copper, shielding gas wire electrode, partially used roll -Type: CuA18 Ø 1.0 mm -Dimensions: Ø 300/100 mm -Weight of roller: 5.2 kg

Condition: used, Wire electrode, SG2 welding wire, welding wire Iodod I Dyljpfx Ah Noal -Type: CuA18 - Wire Thickness: 1.2mm -Number: 2 rolls available -Price: per roll -Weight: 16.1 kg

Condition: used, Wire electrode, SG2 welding wire, welding wire -Type: CuA18 Ijdpsd I Hi Hefx Ah Nsal - Wire Thickness: 1.2mm -started role -Weight: 3kg

Condition: good (used), Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A -Dimensions: 275/275/H225 mm Iaodpfxofcl H Is Ah Njl -Weight: 8.1 kg

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Iajdpfx Ahjxtwdds Nel

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Ijdomk S Slopfx Ah Nsal Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. Iasdpsq Nw Uqsfx Ah Nel This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Year of construction: 2006, condition: used, Ultrasonic and electrolyte cleaning, wire cleaning line, wire cleaning plant, wire treatment plant Manufacturer: Sirio-Wire Type: M0209 Number of wires / cores: 12 (6+6) Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying. Year of construction: 2006 The plant was only in operation for about three years, then the production was moved to another location. Process: Ultrasonic and electolytic cleaning in a hot bath. On the manufacturer's website siriowire you will find a detailed description of the process under "Ultrasonic and Electolytic Cleaning". The unit is in good working condition and is complete except for the pumps. On the photos the catwalk for the operator and the collecting basin in which the plant stands are missing, these photos are still supplemented. Iedpfx Ahjf Nku Re Neal On the last three photos you can see plants of this design in operation.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor with tachometer dynamo and cooling fan -Engine: Type GLF 100/13 -Voltage: 170/200V -Power: 6.5 kW -Speed: 3000 rpm -Tachometer dynamo: Hübner TDP 0.2 T-4 60V 1000/max. 9000 rpm Iasdpfx Ajq Rxz Tjh Nsl -technical Data: see photo of nameplate -Shaft: Ø 28 x 45 mm -Design: B5 -Dimensions: 640/250/H390 mm -Weight: 57 kg

Condition: good (used), Weld studs, ceramic rings, tip ignition studs, head studs -Welding studs: with ceramic rings, 40 different types Quantity/Version: see photo parts list -Delivery/Price: only complete set -Dimensions: 1200/800/H120 mm Iodpfsmxpt Ijx Ah Neal Total weight: 64 kg

Condition: used, Module converter, electronic module -Wire type: DSV 5421-10/220 -Module: 220 V/4 KVA/10 A Iodofcl H Uepfx Ah Neal -with: controller BELIMO SGS -Dimensions: 275/275/H225 mm -Weight: 9.7 kg

Condition: like new (used), Year of construction: 2021, operating hours: 1,657 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID: 26021.6261 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Iaodpfx Ajx Rufpeh Nsl Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1657 hours Battery capacity: 48 V / 750 Ah Options: - VNA (Very Narrow Aisle) truck - with wire guidance Condition: Like new!!

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg Isdjx I Akuopfx Ah Nsal EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: used, Year of construction: 1979, weight 200 kg Iasdpfxsx U A Srs Ah Nol 931855500

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Progress V2 Year of manufacture: 2007 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel range: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (non-submerged) Achievable surface finish: Ra 0.20 µm Maximum cutting rate: 500 mm²/min Glass scales on X and Y axes for enhanced precision Available wire diameters: 0.20 – 0.33 mm Submerged-type machine with automatic wire threading and automatic re-threading after wire break Manual front door (accessible from one side) Includes AGIEJOGGER hand-held pendant for convenient setup AGIE IPG generator with Power Module AGIEVISION control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and completely overhauled after receipt of order. Afterward, a test cut is performed with the finest surface finish for approval. Iaedjx Uxglopfx Ah Nel You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm Ijdpfxex Hp Nhs Ah Njal conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" *

Condition: excellent (used), For sale: a set of 3 professional AMP / TYCO Electronics handheld crimping tools for industrial, automotive, and workshop applications. Original tools with EDB Electronic service documentation – each dedicated to a specific range of wires and contacts. Iedpsw Svapsfx Ah Noal

Condition: excellent (used), Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, With the following equipment: i-groove technology • Travel paths: 600 x 400 x 350 mm • 19" multitouch LCD screen • L-Cut (wire chopper) • 3D SetUp Ijdpfx Ahox U Tkfj Njal • integrated Jumbo Feeder 25 kg Warranty until 06/2026

Condition: like new (used), Year of construction: 2018, operating hours: 2,700 h, functionality: fully functional, machine/vehicle number: MR24D1056, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 295 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 800 mm, empty load weight: 3,500 kg, tank capacity: 860 l, Equipment: documentation/manual, For sale: Precision wire EDM machine Mitsubishi MV2400R (year 2018) in excellent technical condition, currently in continuous operation, fully functional and ready for work – very low hours (2,700 spindle hours). Technical data: Year of manufacture: 2018 Manufacturer: Mitsubishi Electric Model: MV2400R Control system: Mitsubishi M700 series Axis travel: X = 600 mm, Y = 400 mm, Z = 310 mm Max. workpiece dimensions: 1,050 × 800 × 295 mm Max. workpiece weight: 1,500 kg Table size: 840 × 700 mm Wire diameter: 0.1 – 0.3 mm (currently using 0.25 mm) Positioning accuracy: ±1 μm Complete power supply and cooling system – fully operational Machine dimensions: 2,687 × 3,030 × 2,150 mm Weight: approx. 3,500 kg Equipment and accessories: Original upper and lower wire guides Automatic Wire Threading (AWT) Filtration tank with ion-exchange resin Full set of locating fixtures and base devices (in a case) Wire vertical alignment tool Original documentation and operation manuals Isdpfx Ahoxu Hvls Noal Additional equipment purchased for over PLN 40,000: Angular cutting wire guides – upper and lower, 30° Processor battery Precision vise for workpiece clamping Pressure gauge 0–600 PSI – 2 pcs MV power contactor (259320) – 2 pcs CF card with software EDM wire 0.25 mm – 3 new spools 2 sets of new filters Machine transport and handling system Machine condition: Well-maintained, serviced regularly, ready for immediate operation. Complete filtration and cooling systems included. We can assist with transportation, installation, commissioning of the machine, and provide operator training – we have EXPERIENCE. Price negotiable. VAT invoice issued.

Condition: used, Year of construction: 1974, wire dia. 5 - 17 mm wire length max. 5.000 mm straightening feed stufenlos bis ca. 60 m/min 11 kW, 380 V, 50 Hz 45 kW, 1480 U/min; 380 V, 50 Hz total wight ca. 15 t +++++ Iasdpjx U A I Hsfx Ah Njl Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Wire Welding Machine Stock number: 2793 Manufacturer: CEA Year of manufacture: Model: Maxi-compact 370 2100 HE 1252 Machine number: 9004382 Iodpex Uwcfefx Ah Nsal Welding current at 35% duty cycle: 370 A / 32 V at 60% duty cycle: 300 A / 29 V at 100% duty cycle: 230 A / 25 V Connection: 18 kVA Cooling type: Equipment: Torch hose package for connection; welding torch; mobile unit Dimensions: 1,000 x 700 x 1,000 mm Weight: 0.5 t

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, workpiece height (max.): 420 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Progress VP3 Year of manufacture: 2011 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V-axis travel paths: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (in the water tank) / 800 kg (without tank) Achievable surface quality: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side only) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V Generator AGIEVISION 5 CNC control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine will be cleaned and fully overhauled after receipt of your order. You will receive a 6-month warranty on all machine parts. Iodpfx Ahex Sxa To Noal Commissioning and training services are also available on request.

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Measurements depth 1800 mm Measurements height 2200 mm Movement X-Axis Movement 550 Isdpfxjx D N Hre Ah Nsal Y-Axis Movement 400 Z-Axis Movement 350 This 5-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: excellent (used), Year of construction: 2006, operating hours: 32,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 410 mm, Fanuc Alpha 1iC XL – extra high Z travel: 410 mm Excellent condition – fully operational Year of manufacture: 12/2006 Approx. 32,000 operating hours Control: Fanuc Alpha 180is-WB 5 axes: X: 550 mm / 900 mm/min rapid traverse Y: 370 mm / 900 mm/min rapid traverse U: 120 mm / 450 mm/min rapid traverse V: 120 mm / 450 mm/min rapid traverse Z: 410 mm / 900 mm/min rapid traverse Max. workpiece weight: 1000 kg Maximum cutting angle: 30° Automatic wire threading Weight approx. 3.1 t Without screen above the control unit Ijdpfx Ahsx T Akfj Neal Availability: very soon Loading possible

Condition: used, für Draht hydraulically tiltable ja 2 t Year unbekannt Hydraulik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Iodpfx Ahsh Tafxs Noal +++++