Used Wire Forming for sale (5,647)

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Gtsdpfewud Tkjx Agbst Manufactured by Schmedt, Germany. Technical data: max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: used, Year of construction: 2013, operating hours: 47,754 h, functionality: fully functional, machine/vehicle number: 52DR2077, workpiece weight (max.): 1,500 kg, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 300 mm, Equipment: documentation/manual, For sale is a used Mitsubishi MV2400R wire EDM machine in good, well-maintained condition. The machine is well preserved and has been handled with care. Gsdpsx Iukmofx Agbjtt

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: D12L/8008, Offer Number: D12L/8008 Machinetype: wire nail press Make: WAFIOS Gtodpfx Aox Iggtegbet Type: N4 Constr. year: 1975 diameter range: 1,8-3,4 mm nail length: 10-80 mm output - pieces/min: 550 Location: In our warehouse

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device Godjwrrp Uspfx Agbett -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A -Dimensions: 660/390/H350 mm -Weight: 23 kg

Condition: ready for operation (used), functionality: fully functional, Automatic cable cutting / crimping / dismantling machine High daily productivity thanks to quick changeovers. On average, a crimping machine can produce between 700 and 1300 crimps per hour. This machine can crimp terminals ranging from 2800 to 3200 units. Additionally, the machine can test the connections it crimps! - Flexibility and diverse applications - Maximum uptime with minimum maintenance Gsdpfjx H Um Ssx Agbott - Integrated quality measurement devices - Intuitive and user-friendly machine operation

Condition: excellent (used), functionality: fully functional, GEA / Stork / Koppens Forming, Breading, and Frying Line Manufacturer: GEA / Stork / Koppens Line type: forming, breading, and frying of food products The line consists of the following equipment: 1. Meat Bin (stainless steel) Capacity: 200 l 2. 200 l Bin Lifter Manufacturer: CFS Type: LFT (R) Machine number: 1642 Power supply: 400 V, 3-phase, 50 Hz Power: 0.55 kW Current consumption: 1.8 A Weight: 310 kg Gedpfox H T Egex Agbett Lifting height: up to 2200 mm (adjustable) Dimensions: 1200 × 1300 × 3000 mm 3. Former Manufacturer: GEA Food Solutions Bakel B.V. Model: MultiFormer 400 Machine number: E022110205415 Year of production: 2021 Power supply: 380–415 V, 3-phase, 50 Hz Power: 8 kW Current consumption: 15.4 A Belt: stainless steel wire mesh Belt width: 400 mm Machine dimensions: 3100 × 1000 × 2700 mm Additional forming accessories: - 2 pallets of forming plates - Stainless steel rack with 2 additional discharge belts (belt width: 400 mm) - Rack dimensions: 1350 × 600 × 2100 mm - GEA tool trolley - Trolley dimensions: 1200 × 700 × 950 mm 4. Breading Machine/Breader Manufacturer: Stork Titan B.V. Model: RotoCrumb TRC 630 TD 2112 Type: 4780626AA Serial number: 10061097 Year of production: 2007 Belt: stainless steel wire mesh Belt width: 630 mm Dimensions: 3600 × 1600 × 2100 mm 5. Stainless steel platform for IBC tanks Working height: 1800 mm Dimensions: 1200 × 1500 × 2800 mm 6. Fryer Manufacturer: Koppens Machinefabriek B.V. Type: BR 3000 / 600 Machine number: 1316 Year of production: 2000 Power supply: 400 V, 3-phase, 50 Hz Power: 1.5 kW Current consumption: 4.6 A Weight: 2450 kg Belt: stainless steel wire mesh Belt width: 600 mm Frying length: 3000 mm Heating system: thermal oil Manual hoists Fryer dimensions: 5400 × 1600 × 3200 mm Fryer accessories: - Valve station – 2200 × 600 × 2600 mm - Thermal oil station with pump – 1300 × 800 × 2700 mm - Stainless steel cabinet with 2 Ansul fire extinguishers – 600 × 210 × 750 mm 7. Oil Tank (stainless steel) Manufacturer: Koppens Machinefabriek B.V. Diameter: 1100 mm Height: 3200 mm 8. Belt Conveyor with Covers Manufacturer: Koppens Machinefabriek B.V. Model: NGT 5000/600 Serial number: 12 Power supply: 380 V, 3-phase, 50 Hz Belt width: 600 mm Dimensions: 6900 × 900 × 1150 mm 9. De-elevating Belt Stainless steel wire mesh belt Belt width: 330 mm Adjustable height Dimensions: 2000 × 800 × 850 mm Complete GEA / Stork / Koppens line is intended for industrial production of formed, breaded, and fried food products such as nuggets, burgers, patties, and convenience foods. The line enables a continuous and automated processing workflow — from raw material loading, through precise forming and even breading, right up to controlled frying with thermal oil. The set is characterised by high performance, robust stainless steel construction, and the potential for integration with other production line elements.

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Godpfx Aex Hz Shsgbett

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, wire diameter (max.): 10 mm, input frequency: 50 Hz, workpiece weight (max.): 70 kg, type of input current: three-phase, Equipment: cooling unit, OMEGA CM43 Submerged EDM wire The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Gtjdjwr Utispfx Agbet Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation. Gtodpfjvdu Hzex Agbot

Condition: new, Our best seller, as long as it comes to making many kinds of springs, including torsion, double-torsion, extension & wireforms. Cheap in price, but valuable in terms of production rates, accuracy and possibilities. Gjdpfei Ik D Eox Agbott

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The fully automatic Alpha 530 single-core cable processing machine for crimping and fitting rubber seals on both sides meets the highest quality standards for cable cross-sections from 0.13 to 6 mm². Gsdpfx Agox H Ualobjtt

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h Gjdpfx Agsx Hadvsbjtt NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: used, Year of construction: 2005, Machining paths X/Y/Z: 350mm/220mm/220mm, table dimensions X/Y: 680mm/450mm. max. workpiece weight: 750kg, max. workpiece dimensions X/Y/Z: 1000mm/550mm/250mm. Wire diameter range: 0.1mm-0.3mm, wire spool size: 8kg, skewing capacity: 0°-30°. Dimensions X/Y/Z: 2020mm/2050mm/2000mm, weight: approx. 2500kg, operating hours: approx. 60000. Gtjdox E Ulxopfx Agbjt

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course Gedpfx Agovt Ec Sobjtt 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: excellent (used), Year of construction: 2017, operating hours: 8,500 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, type of input current: AC, table width: 840 mm, overall weight: 3,500 kg, table length: 640 mm, positioning accuracy: 0.003 mm, ### Price heavily reduced ### This machine is very well maintained and in very good condition. The machine is still in production. You can view and test this machine with power on. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Gtjdpfx Ajvq Rh Uegbet Year of manufacture: 2017 MODEL: MV 2400R MV-R Series – Power for Precision Production hours: approx. 8,000 hours Application type: EDM / wire cutting Machine type: Wire EDM machine Technical specifications - Mitsubishi MV 2400R X-axis movement: 600 mm Y-axis movement: 400 mm Z-axis movement: 310 mm Travel (X / Y / Z) in mm: 600 / 400 / 310 Travel (U / V) in mm: 150 / 150 (+/- 75) Max. workpiece dimensions (W x D x H) in mm: 1050 x 820 x 305 Max. workpiece weight in kg: 1500 Table dimensions (W x D) in mm: 840 x 640 Overall dimensions (W x D x H) in mm: 2687 x 3030 x 2150 Machine weight in kg: 3500 Price greatly reduced.

Condition: used, Year of construction: 2019, functionality: fully functional, Rated voltage: 220/380 V; Current: 30 A. The vacuum forming machine comes with its own wood cutter/former (see pictures). Gtsdpjxzpw Esfx Agbjt

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Gtodpovc Aklsfx Agbjt Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Paths Gjdpfxjxqallo Agbett Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Maximum manual speed: 15 mm/s Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Maximum workpiece dimensions: 960mm 670mm 245mm Maximum workpiece weight: 850 kg Capabilities: Angular wire cutting (based on 3D models) Additional features: Automatic wire feeding (AWF) Immersion in dielectric fluid Godpfx Asx Ekcyegbett

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, BUD-MASZ roof tile sheet machine, manufactured in 2010, 3,510 km mileage, 1250 mm strip, without decoiler. Godexbgl Tepfx Agbjtt

Condition: used, Steel wire ropes, lifting slings made of steel Length: 10 m Diameter: 25 mm Loops right/left Load capacity: 5 t 6 pieces available 161225ä Godpfxegzpw Ie Agbjtt

Condition: good (used), Year of construction: 2001, The machine is in good working condition but needs some maintenance. Gsdpfx Aex Ec S Degbstt

Condition: new, The Neospark T 500 is an advanced Wire Cut EDM machine from the renowned brand KNUTH, known for its precision and efficiency in electrical discharge machining. This high-performance machine is ideal for companies specializing in mold and tool making, providing exceptional cutting capabilities for electrically conductive materials, especially when separating 3-D printed components from their base plates. The Neospark T features a rigid cast-iron frame with precision-machined surfaces, ensuring permanent mechanical precision through its advanced linear guides and preloaded ballscrews on all axes. Operating costs are notably low thanks to its cost-effective design, while the user-oriented IPC-based 4-axis control system enhances process reliability. Moreover, it includes a specialized aluminum cutting function that extends wire life and minimizes the risk of breakage during machining. With features like a central lubrication system, easy setup via handheld controls, and integrated CAD/CAM software, the Neospark T 500 is a robust choice for professionals seeking efficient and reliable Wire Cut EDM solutions. To explore this product further, request a quote today. Gtedjwt Du Sspfx Agbst

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Gtodpox Ectujfx Agbst

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in the X/Y axes Linear scales in X/Y axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Gjdpfoxpfy Sox Agbstt Compressor cooler tä161225