Used Wire Drawing Machine for sale (67,286)

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Capstan diameter: 900 mm. Drawing force: 3,850 kg. Hsdpfxezx Rikj Ap Hont Motor: 18.75 kW Speed: 21.25 m/min. Weight: 2,000 kg.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm Hnjdezycakopfx Ap Hjt - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm Hnsdjz Az Uvspfx Ap Hst - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe Hnedpfx Apswi Tidj Hst

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm Hnodpfxszgu Igs Ap Hjt max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Hnjdst Ixkzjpfx Ap Hjt

Condition: like new (used), Year of construction: 2015, operating hours: 18,500 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 300 mm, workpiece width (max.): 600 mm, workpiece length (max.): 1,000 mm, overall weight: 3,600 kg, Equipment: compressor, cooling unit, documentation/manual, We are selling a slightly used Fanuc ROBOCUT α-C600ia. The machine is in working condition and connected to the power grid. A test run is possible during inspection. Hnsdszy D Ayopfx Ap Hjt

Condition: used, Year of construction: 1997, functionality: not functional, type of input current: three-phase, overall weight: 422 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 14 A, Equipment: cooling unit, documentation/manual, We offer this used AGIE AGIECUT 125 wire EDM machine, manufactured in 1997. Type: AGIEPULS MMD Hedpfx Apsz Affno Hont Serial number: 491.010 Electrical diagram: 624262.2 Weight: 422 kg Voltage: 3 x 400 V Frequency: 50 / 60 Hz Rated current: 14.75 A The machine is currently disconnected. All electronic components, circuit boards, and the numerical control unit are intact. We suggest using it for spare parts recovery. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: Hnjdjwi S Ixjpfx Ap Hjt inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 Hnjdpfxsik Hb Tj Ap Hjt The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! We do not know what the problem is!

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours. Hsdpfx Aezzwrkjp Hsnt

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Hedpfx Aper Nfvme Hont Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, Year of construction: 2005, overall weight: 1,250 kg, power: 9.5 kW (12.92 HP), input voltage: 380 V, input frequency: 50 Hz, total length: 4,700 mm, total width: 1,140 mm, total height: 1,450 mm, We are offering this used VIOLI VM TRI hydraulic stretching machine, manufactured in 2005, for sale. Model: VM TRI 10 Serial number: 973 Year of manufacture: 2005 Length: 4700 mm Depth: 1140 mm Height: 1450 mm Rated voltage: 380 V Hnjdpsy Sz Awsfx Ap Hot Frequency: 50 Hz Power: 9.5 kW Weight: 1250 kg Price plus VAT. Payment in advance. Shipping via freight forwarder or collection by appointment only. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 808, The machine is designed for straightening and cutting wire with a diameter of 4-10 mm and a tensile strength of 400-700 N/mm2, using appropriate straightening and cutting tools. The maximum length of the cut wire is 3000 mm. Wire coil: maximum coil weight 1500 kg, maximum coil height 1000 mm, internal coil diameter 450 mm. The total length of the machine, including the wire unwinder, is approximately 10 m. Machine weight: 8 tons. Hodpfszy Et Tjx Ap Hsnt Location: In our workshop.

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Hsdpfxjtylpio Ap Hont

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Hodetylpcopfx Ap Hjnt

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505 Hnjdpfx Apoz Ar Ags Hst

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,050 mm, total length: 2,800 mm, total width: 2,200 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Hnodpfszhvhdox Ap Hst Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servomotors Glass scales in X and Y axis Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was dismantled due to lack of need and was not in operation. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 220 x 280 x 205 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Hnodpey N Df Nefx Ap Hjt

Condition: good (used), functionality: fully functional, For sale is a used universal wire stapling machine, Speckbötel type FEN. This machine is particularly suitable for the production and assembly of wine crates, fruit crates, vegetable crates, and other wooden crates or wooden packaging. The staples are formed directly from the continuous wire feed from the reel within the machine. This makes the machine suitable for continuous operation in crate and packaging production. Technical data / features: Hnjdpfxezymyne Ap Hjt Manufacturer: Speckbötel Type: FEN Manufacturing location: Hamburg Machine type: Universal wire stapling machine Design: Wire nailing machine / flat stapling machine Staple formation from continuous wire Processing of wire from a reel Large work table Height-adjustable work area Handwheel for adjustment Heavy-duty and robust industrial design Suitable for the production or assembly of: Wine crates Fruit crates Vegetable crates Packaging crates other wooden crates and wooden packaging The machine is in used condition. Features and condition as shown in the photos. Transportation is possible for an additional charge! The machine is currently still at the customer's location but would be available shortly! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM wire The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Hnsdpfxswr Utie Ap Hot Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Long arm Wire Stitching Machine Polygraph 781 Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781 Kartonagenhefter / Carton Stitcher Hnjdpfx Apjzzy U Us Hjt Typ / Model 781/1Q50R Serial-No. 7160 Armlänge / Arm length 55cm Fußpedal / Foot pedal Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2008, operating hours: 1,120 h, Controller ARISTECH (similar as FANUC) Number of axes: 4 Table size 640 x 470 mm X Axis Travel 425 mm Y Axis Travel 300 mm Z Axis Travel 250 mm Max workpiece size 800 x 600 x 250 mm U Axis Available:standard Weight cca 3000 kg Dimensions LxWxH = 1860 x 2050 x 2100 mm Hodpfovvl Uajx Ap Hjnt The machine consist of following units 1. EDM machine 2. Controller cabinet 3. Water tank and pump 4. Water cooler 5. Transformer 6. Transformer Nr.2 (power supply) The machine was barelly used. Still unter power. It will be due to company liquidation.

Condition: ready for operation (used), Year of construction: 1988, Control: FANUC Travel: X= 500, Y= 350, Z= 300 mm Max. table load: 350 kg Dimensions: 3500 x 2400 x 2400 mm Weight: 3,000 kg Hjdpfxjxx Uats Ap Hsnt

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Hedpewwq S Ssfx Ap Hsnt Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications.