Used Wide Belt for sale (14,208)

Condition: ready for operation (used), Year of construction: 2013, Suitable for thin materials, wood and painted surfaces. Working width: 1650mm, feed rate: 5-25m/min, sanding belt dimensions: 1650mm/2620mm, connected load: 33kW, length: 1800mm, width: 2200mm, height: 2500mm, weight: 4.5t, operating hours: approx. 200h. The machine is technically fully functional. On-site inspection is possible. Lhodpfx Adeuqac De Njb

Condition: like new (used), working width 1350 mm, calibration unit with metal roller, combination unit with two rubber rollers and multi-segment pad, oscillation by photocells, machine function activation from control panel, belt blow-off, stepless feed speed regulation for sanding belt on 2nd unit, pneumatically controlled multi-segment pad with adjustment, year of manufacture 2007, electric table adjustment, material thickness gauge, vacuum under-table. Lhjdpfx Aox Daz Hjd Njb

Year of construction: 2011, condition: used, functionality: fully functional, MACHINING CAPACITIES: - Height (thickness): 30 to 390 mm - Maximum workpiece width: 400 mm - Abrasive belt speed: 1300 m/min - Conveyor feed speed: 10 m/min - Belt dimensions: 420x1800 mm (consult us for supply) MACHINE CONFIGURATION: - Roller table, belt operates from below Table height from floor: 90 cm - Automatic workpiece detection by sensor - Sanding pad with pneumatic pressure - Automatic belt rotation direction change MACHINE FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 22A (35A protection) - Automatic star-delta starter - Ammeter(s) for power consumption monitoring Feed motor: 0.5 kW Belt motor: 7.5 kW - Pneumatic tensioning, oscillation, and disengagement of rollers - Pneumatic supply: 6 to 8 bar - Extraction: 2 lower ports Ø150 mm Recommended airflow: 2200 m³/h Speed: 20 m/sec - CE marking, emergency stops front and rear, lockable isolator switch Note: For your satisfaction, we remind you that belts should be released when the machine is not in use and that all humidity, including dew point inside your workshop in winter, must be avoided. Dimensions: 1500x1300x2050 mm (H) Lhjdpfx Adex A Unxs Neb Weight: 1200 kg

Condition: good (used), Used for steaming pasta and other food products. Excellent condition, available immediately. Lsdexxd Imopfx Ad Nshb

Condition: excellent (used), Wide Belt Sander Felder FW 1102 C Sanding width: 1100 mm Sanding height: 3–170 mm Lhodpfx Adex A Dqij Nob 1st unit with rubber calibrating roller, hardness 85 2nd combination unit with rubber roller and sanding pad with stepless pressure adjustment for delicate sanding of veneered components 15 kW motor with automatic star/delta starter Feed speed adjustable via frequency inverter Electric table adjustment Electronic table position display Workpiece thickness gauge Machine in very good condition, barely distinguishable from new

Year of construction: 2021, condition: new, machine/vehicle number: GWH432125, Working width 1,100 mm, sanding belt dimension 1.120 x 2.150 mm, Lhodpjhgmmaefx Ad Nsb max. working thickness 160 mm, combi sanding unit with calibration roller D = 150 mm, pneumatic sanding shoe with insert control, motor 15 kW ( 20 PS), sanding belt speed 18 m per second, stepless feed carpet 4 - 20 m/min., feed motor 0,55 kW (0,75 HP), electric table positioning with motor 0,24 kW and digital LCD height display, mechanical "ECO GEAR SYSTEM" (oscillation of the abrasive belt), automatic carpet centering, Automatic EMERGENCY table lowering, Check-Control-Panel, Automatic sanding roller stop on the control panel, Sanding grit compensation with 6 positions 2 rollers each in the infeed and outfeed, suction connection D = 160 mm, machine with CE - regulations Dimension approx. L x W x H, 1.650 x 1.800 x 2.025 mm Weight approx. 1.300 kg, (identical in construction as Unitek LC 1120 1N KRT) ex stock Seevetal, subject to prior sale, without transport, assembly and instruction

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec Ledpovf D S Asfx Ad Njhb - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Wide-belt sander VIET CHALLENGE 321 Year of production: 1997 Technical condition: good Technical data: * Working width: 1100 mm * 3 rollers: • first roller hardness: 90 Sh • second roller hardness: 45 Sh • third with electronic pad unit Lhjdpfxoxz Uk De Ad Njb * Machine equipped with 3 independent motors * Automatic table lifting and lowering

Condition: used, Year of construction: 1996, Working width: 1100 mm Working height: 140 mm Min. workpiece length: Height adjustment: electric Workpiece thickness display: digital Units: 1 1st unit: Combination unit (roller - pad) with electronic segmented sanding pad Electronically controlled segmented pressure beam: CPS system, element width 50 mm Cleaning brush: Yes Feed speeds: 2 Lhjdpfjxwnh Ujx Ad Nsb Sanding belt dimensions: 1120 mm x 1900 mm Sanding belt motor power: 11 kW Extraction connection: 160 mm, 140 mm Machine length: 1800 mm Machine width: 1800 mm Weight: 1500 kg

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,350 mm, working height: 900 mm, workpiece height (max.): 150 mm, grinding belt width: 1,370 mm, TECHNICAL DETAILS Sanding width: 1,350 mm Working height: 900 mm Workpiece thickness: max. 150 mm Abrasive belt width: 1,370 mm Belt speed: 18 m/s Contact roller diameter: 140 mm Feed belt system: length 3,400 mm Feed belt system: width 1,350 mm MACHINE DETAILS Weight: approx. 3,000 kg 1st unit: 18.5 kW 2nd unit: 15 kW Machine resistance: approx. 800 Pa Operating pressure: 6.8 bar Air consumption: approx. 28 l/min Feed drive: 0.7/0.9 kW (2 speeds) Feed speed: steplessly adjustable: 2.5–13 m/min EQUIPMENT Segmented sanding pad Combination unit Ledpsxwnbbefx Ad Njhb

Condition: ready for operation (used), Brand: Carstens Lhsdpfxsxz Ea Ns Ad Njb Model: DR15/2 Machine no.: 64913 Technical data Sanding width 1100 mm Dust nozzle diameter 300 mm Motor 22 kW, 50 Hz, 380 V, 3-phase Transport dimensions: 150 x 170 x 220 cm

Condition: excellent (used), Technical data: Grinding belt width: 150 mm Dimensions of fixed working table: 1000x400 mm Dimensions of tilting work table: 1000x350 mm Mechanical oscillation Extraction nozzle 2x120mm Power supply: 380 V Motor rotation: 1300 r/min Motor power: 3 kW Lhedpfx Adou Rmads Nob Overall dimensions: Length: 1,850 mm Width: 1 400 mm Height: 1,350 mm

Condition: good (used), Features: * Used belt conveyor * Color: gray * SEW gear motor available * Feet to be ordered separately * Material: Steel * Ideal for fast material transport * Expertly disassembled and packaged * Condition: fully functional Technical data: Mass of the belt conveyor total length: 1.040 mm Total width: 700 mm Belt specifications belt width: 600 mm Belt type: smooth Frame data Height frame: 160 mm Motor data SEW-EURODRIVE Type: R27 DT90S4/BMG/HR kW: 1,1 Belt conveyor The belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal process flow. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or delivery point and also serves, for example, as a connecting route in front of or between production and processing machines. In addition, it enables efficient parts transport in the plant and warehouse and is used to convey considerable quantities and distances. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, screw conveyors or telescopic conveyors for loading and unloading your goods! We would be pleased to make you an individual offer or to advise you on conception or assembly questions. Just let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, handicraft or the electronics industry we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers. Ljdpfodidipjx Ad Nohb

Condition: used, Bütfering Optimat SCO 113 - Diamond C + LACQUER CONSTANT TABLE MACHINE / automatic head adjustment Robust frame construction with consistent infeed height of 900 mm, achieved by adjusting the machine’s upper section. Workpiece thickness settings: 3 - 160 mm 1st unit: combination steel contact roller and electronically controlled segmented sanding pad unit, CPS II system, with variable sanding pressure 2nd unit: cleaning brush unit Stable VACUUM TABLE for large-area workpiece support Enhanced workpiece holding via suction clamping device – high-performance blower with control valve integrated in the machine stand. Table segmentation can be activated via terminal Extendable workpiece support Lhedpexur Iyjfx Ad Nob Working width: 1350 mm Stepless feed speed: 2.5 – 13 m/min LACQUER SANDING PACKAGE: Vacuum table with lacquer carpet and 3 kW vacuum generator Stepless belt speed for lacquer sanding: 2 – 18 m/sec Oscillating belt guidance for 1350 mm working width Motor power 1st unit: 15 kW Motor power 2nd unit (cleaning brush): 1.5 kW 14" touchscreen control for automation and management of all work programs Machine is FACTORY-REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Condition: used, functionality: fully functional, grinding width: 630 mm, grinding height: 150 mm, height adjustment type: electric, - Italian-made - Used sander, in very good condition TECHNICAL SPECIFICATIONS: - Maximum working width: 630mm - Maximum working height: 150mm 1 unit: + - Grooved rubber calibrating roller + pad + 1 metal roller: + *from above: - Rubber feed-in slip roller: + - Processing unit: + - Rubber feed-out slip roller: + *from below: - Rubber slip roller: + - Feed belt: + - Pneumatic belt oscillation with photocells: + - 2 feed speeds: 0.28kW - Motor: 6kW - Electric brake: + Ljdew Ip Ekspfx Ad Nshb - Electric table elevation: + - Working pressure: 6-8 bar - Extraction nozzle diameter: 150mm - Overall dimensions (L/W/H): 1070x1320x1900mm - Weight: 722kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Lhjdswmxh Tspfx Ad Nsb

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, pass-through height: 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Lhjdpfownr A Hjx Ad Njb Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: good (used), - Used machine - Passage width: 1350 mm Ledjwhvfxjpfx Ad Nshb - Rubber sanding roller - Rubber sanding roller - Sanding pad with cushion - Vacuum carpet - Rated current: 131 A - Rated power: 62.7 kW - Voltage: 400 V

Condition: new, 1. steel roller diameter (mm) 120 2. Rubberized working roller diameter (mm) 160, 455h Sanding belt (mm) 1120 x 2200, 1 piece per sanding unit Main engines (kW) 2 x 11 (15 HP) Motorized table stroke - Work piece height (mm) 3 - 160 Automatic star/delta starting of the motor Sanding roller lifting for 1st unit from the front control panel - pneumatic Sanding roller lifting for 2nd unit from the front control panel - pneumatic Pneumatic grinding shoe PL 2 Amperemeter - for measuring the current of the motors of the grinding units Sanding belt oscillation control - with the help of an optoelectronic reader with infrared beam Automatic feed belt centering Table Positioner Electronic measurement of the table position with digital display Frequency converter of the feed belt speed (m/min) 3 - 15 Lodpfjfhmgcjx Ad Nehb Rubberised pressure rollers Emergency-off pneumatic disc brake of the main engine Mechanical limitation of the maximum chip removal of the workpiece Noise protection Power supply 400 V/50 Hz Machine built to CE power and safety standards Additional equipment on request

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW Lhedpfx Adjgr Er So Njb 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: used, Year of construction: 1993, functionality: fully functional, grinding width: 1,350 mm, grinding height: 150 mm, working height: 150 mm, height adjustment type: electric, workpiece height (max.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL PARAMETERS: Lsdpfx Adew H Sk To Nohb - Working sanding width: 1350 mm - Max. thickness of workpieces: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit (sergeant type) with sequential electronic pressure - Main motor: 13 kW - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pad pressure - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO SENSOR OSCILLATION - Pneumatic bar cleaning system with oscillation for cleaning belts III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pad pressure - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for workpiece behind the main unit at the outfeed - Motor: 1.1 kW - Extraction port: 1 x 140 mm - Feed regulated by gear motor: 4 kW feed motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for sanding lacquer and intermediate sanding between coats - Dimensions (LxWxH): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically read out height: digital Lhjdpfxeknyhls Ad Neb electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: new, Year of construction: 2023, working width: 1100 mm min. workpiece height: 4 mm max. workpiece height: 170 mm height adjustment: electrically workpiece thickness display: digital aggregates: 2 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller Link grinding shoe: elastic, sector distance 56 Electronic control: FOX 500 KTR Ljdpfxeirmg Uo Ad Nohb dust brush: no motor power: 15 kW suction connection: 2 x 140 mm machine length: 1650 mm machine width: 1820 mm machine height: 1960 mm weight: 1170 kg

Condition: like new (used), 6233 LONG-BELT SANDER FRB L93 - 3000 - Motor power: 2.2 kW Lhsdpfx Adevakikj Nsb - Power supply: 380 V - Table length: 290 cm - Table width: 80 cm - Electric height adjustment of the table - Belt width: 15 cm

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Sanding width: 1100 mm Sanding belt length: 1900 mm Workpiece thickness: 3-150 mm Feed speed: infinitely variable, 2.5 - 13 m/min 1 steel contact roller 1 rubber-coated contact roller 1 sanding shoe unit: with air-cushion sanding shoe Drives: 1st sanding unit: 15 kW 2nd sanding unit: 15 kW 3rd sanding unit: 11 kW with infeed table extension Lhodpfx Ajwka S Usd Neb with outfeed table extension Total connected load: 43 kW Extraction capacity: approx. 6750 m³/h Air velocity: 20 m/s Compressed air connection: 6-8 bar Air requirement: approx. 30 l/min Dimensions: 1750 x 2740 x 1890 mm Weight: 3100 kg Availability: short notice Location: 65439 Flörsheim