Used Wide Belt for sale (16,571)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 5,500 kg, compressed air connection: 6 bar, table length: 1,600 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 4,000 mm, workpiece length (max.): 1,500 mm, Used TIMESAVERS Model 42-Series-1600-WWB -- LIKE NEW -- For grinding and satin finishing stainless steel sheet surfaces. Wide belt sanding machine featuring two top-mounted wide belt sanding units and one brush unit. This is a dry-operating machine equipped with a Wandres production cleaning brush. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine! Technical Data: Year of manufacture: 2021 Minimum workpiece dimensions: 750 mm x 1000 mm x 2 mm Maximum workpiece dimensions: 4000 mm x 1500 mm x 6 mm Abrasive belt dimensions (W x L): 1630 x 2620 mm Table opening: 2-100 mm Adjustment accuracy: 0.01 mm Flat feed belt Feed speed: 4-20 m/min Electrical: Main motor 1st unit, frequency controlled: 22 kW Main motor 2nd unit, frequency controlled: 22 kW Main motor 3rd unit, frequency controlled: 15 kW Feed motor: 3 kW Electrical connection: 400 V Frequency: 50 Hz Compressed air: Required air pressure: 6 bar Air consumption per unit: 30 l/min Chsdpfxsq Tp H Ho Ab Tof Wandres air consumption: 235 l/min Dust extraction PER unit: Required capacity at 125 mm water column: 10,000 m³/h Wandres brush: 600 m³/h Machine weight: 5,500 kg Extraction and/or on-site installation services can be offered upon request. Please note: The roller table shown in the gallery image is NOT included with the above-mentioned machine!

Condition: excellent (used), Griggio wide belt through-feed sander Chjdpfexixxnex Ab Tef Combination unit with pad, rubber-coated calibration roller. Oscillation with photocell, electric table lifting. Dimensions: length 140 cm, width 100 cm, height 210 cm Machine in very good condition.

Condition: good (used), Year of construction: 2001, * 5 grinding units: - 1 bottom 18.5 kW - 2 lower 15 kW - 3 upper 18,5 kW Csdpfjt Hmg Isx Ab Tjhf - 4 upper 15 kW - 5 upper 11 kW * stepless feed regulation on inverter (2x2.2kW) * electric adjustment of table height * pneumatic oscillation * grinding belt blowing

Condition: used, Wide belt sander Manufacturer: Heesemann Model: KSM1 Sanding width: 1,300 mm Workpiece thickness: 3-140 mm Feed speed: 4.5-22 m/min Sanding belt dimensions: 2,620 x 1,350 mm Brushing device Brush roller diameter: 150 mm Drive power: 1.5 kW Space requirement (L x W): 1,850 x 2,470 mm Chsdpfewv Ta Nsx Ab Tsf

Condition: used, Year of construction: 2000, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 1,380 mm, total width: 2,000 mm, total height: 2,500 mm, total length: 6,000 mm, working width: 1,380 mm, grinding width: 160 mm, overall weight: 2,000 kg, Double-sided calibrating machine (top and bottom) Costa, maximum working width 1380 mm and height between 3 and 160 mm. = PRICE 65,000 euro Chjdpfoxgcr Hox Ab Tof

Condition: used, Year of construction: 1976, Used machine Year of manufacture: 1976 Underside sanding Material guidance via rubber rollers Contactless oscillation control Quick-change pressure beam Electromotive adjustment of tool thickness with clearly legible digital display Pushbutton with contactor control Sanding width: 1350 mm Max. workpiece thickness: 150 mm Chodpjwpm I Tefx Ab Tof Abrasive belt width: 1360 mm Abrasive belt length: 1900 mm Roller feed switchable 10 + 20 m/min Compressed air connection: 6 bar Air consumption approx. 180 NL/min Availability: short-term Storage location: Röllbach

Condition: like new (used), Year of construction: 2017, machine/vehicle number: 0-256-23-1012, Operating hours recorded: 361.69 h Working width: 1350 mm Wide belt width: 1350-1380 mm Wide belt width: H/X 1370 mm Cross belt width: 150 mm Belt change side: left Working height: 900 mm Workpiece thickness: 3-160 mm Feed speed: 2.5-13 m/min Workpiece detection: High-precision workpiece detection with a 12.5 mm pitch; multiple loading of complex parts Chodpfxjv T Nnfj Ab Tsf Units: 1. Cross unit (1350 mm) (T3/5), Continuously variable, frequency-controlled cutting speed 2-16 m/s, MPS 2.0 Plus (1350 mm) electromagnet. Articulated pressure bar Drive motor 13.5 kW 2. X-shaped unit (1350 mm) (T3/5) with internal lamella belt and steel contact roller for mounting an articulated pressure bar with three options: - Calibration sanding with profiled contact roller - Veneer and lacquer sanding without lamella belt - Veneer and lacquer sanding with lamella belt Continuously variable, frequency-controlled cutting speed 2-18 m/s MPS 2.0 Plus (1350 mm) Electromagnetic articulated pressure bar Drive motor 18.5 kW 3. U-shaped unit (1350 mm) (T3/S/7/9) Universal unit for mounting round brushes on interchangeable frames and disc brush cassettes. Terminal controlled adjustment of the brush feed and thus the immersion depth, continuously frequency controlled brush oscillation 36-240 strokes/min. Switchable Rotation direction in either forward or reverse rotation Drive motor 15 kW Cutting speed 130 - 1000 2 carriages for easier changing of brush units on interchangeable frames (service carriage for U-unit) 1 structuring brush, diameter 300 mm 1 satin brush, diameter 300 mm 4th brush unit with structuring brush Drive motor 5.5 kW Brush material: Anderlon K 80 Diameter 150 mm Cleaning system with integrated ionization device with 16 rotating nozzles and suction nozzle Sanding belt dimensions 1370 x 2150 mm Vacuum clamping device 5.5 kW, vacuum blower integrated into the machine Machine control terminal touch screen Additional 2 roller conveyors, each L = 3000 mm, W = 1300 mm Various Sanding belts P24-P100 (approx. 50); extraction piping; mobile sanding belt holder (6 arms) Operating voltage: 400 V, 50 Hz Space requirement: L x W x H: 2566 mm x 2100 mm x 2415 mm Weight: 5500 kg Machine dimensions: 2600 x 2030 x 2000 mm Location: 32683 Barntrup

Condition: used, Year of construction: 2016, functionality: fully functional, FLEXY TRF wide belt sander, ideal for lacquered fronts and veneers. The machine comes in a very comprehensive configuration. Csdpsw Exatjfx Ab Tehf It has three sanding units, including two shoes – transverse and longitudinal with a "sergeant". Single section width – 27 mm. Tynex brush at the outfeed. Both sanding shoes and feed on frequency inverters. High-power motors. Vacuum table. Touch screen. Blow-off and cleaning of machined elements. Illumination of machined elements.

Condition: good (used), Wide belt sander Vertongen S320 - Sanding width: 30 cm - Manual table lifting - Max sanding height: 20 cm - Combination unit Chsdpjxc Exbefx Ab Tjf - 2 feed speeds - Main motor: 5.5 kW - Mechanical oscillation.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) Chodexczmzepfx Ab Tof - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: used, Year of construction: 2018, machine/vehicle number: 6202031, SECOND-HAND WIDE BELT SANDER VIET MOD. S2 323 RRT – CE RULES - Configuration: 1. sanding roller diam. 200 mm 2. sanding roller diam. 250 mm (with inverter) 3. sanding pad 4. Tynex brush (with inverter) - Working width 1350 mm - Air blowers on the 2nd and 3rd sanding units - Entry shoe presser - Pressure rollers between sanding groups - Vacuum table - Conveyor belt with adjustable speed (with inverter) - Serial no. 6202031 - Year: 2018 - CE ruler Chjdpfx Aewrn Rzob Tjf

Year of construction: 1993, condition: excellent (used), Working width 1100 mm Working height 4-160mm Belt dimensions 2620x1130 mm Feed speed 3.4-21.4 m/min The engine of the first aggregate 11 kW Second generator motor 15 kW 400V three-phase power supply Codpfx Aoi A Afvsb Tehf Weight approx. 3100 kg

Condition: excellent (used), SCM Sandya 5 Wide Belt Sander - Max. sanding width: 110 cm - Max. sanding height: 16 cm - First unit: Steel calibration roller - Second unit: Rubber-coated roller Sanding pad - One motor drives two units: Two-speed motor, 1450 rpm, 8.8 kW 2940 rpm, 11 kW - 2 belt speeds Chsdpfxjxbzlzj Ab Tsf - Weight: 1,190 kg - Length: 200 cm, Width: 148 cm, Height: 190 cm

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: SA/005565, double-sided operation Sanding width 1,100 mm Minimum workpiece thickness 4 mm Useful height 200 mm Total sanding units Cedpfjxbp I Dex Ab Tjhf 5 Lower sanding belts 2 Sanding rollers 5 Steel roller Roller hardness °Shore 45 Constant table height Main motor kW 18.5 kW Abrasive belt length 1,900 mm Max. belt speed 18 m/s Adjustable belt speed scale graduated Max. feed speed 18 m/min Adjustable feed Sprayer Belt sander Configuration uw-uw-w-w-w Belt change side Left Conformity marking CE mark Approx. weight 3,500 kg

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, We offer for sale a wide-belt sander SANDYA 16-S RRCS 1350 The machine is fully operational and has seen little use. It was utilized as an auxiliary machine for non-standard projects. STANDARD EQUIPMENT * Control panel * Electric adjustment of working height * Digital display of working thickness * Feed belt made of natural rubber * Automatic centering and tensioning of the feed belt * Movable rubber pressure rollers before and after the working units * Flexible steel pressure bar in front of the first working unit * 2 roller supports with 2 non-driven rollers at the machine's infeed and outfeed * Electronic oscillation of the sanding belt * Extraction sockets designed to reduce air consumption * "Hand guard" – emergency device at the material infeed * Safety switches at the front and rear of the machine * Lockable main switch * Automatic “star-delta” switch for the main motor Chjdpfswq Efmex Ab Tsf * Overload protection for the main motor * Automatic brake for instant shutdown of the working units * Automatic emergency stop in case of: - sanding belt breakage - lack of tension in the sanding belt - lateral displacement of the sanding belt - lack of compressed air - main motor overload * Electric motors with IP 54 insulation class TECHNICAL DATA - Working width: 1,350 mm - Min./max. working thickness: 3–170 mm - Sanding belt width: 1,375 mm - Sanding belt length: 2,620 mm Machine configuration: -B/23 * Reading bar for sectional pads, 23 sectors FIRST UNIT "R" - Calibrating steel roller, diameter 200 mm, 18/5 kW - Pneumatically activated On/Off selector for the first roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Oscillating blower for cleaning the sanding belt of the first unit Complete with: • Electronic positioning • Timed activation linked to the presence of the workpiece • Extraction port • Filter and pressure regulator SECOND UNIT "R" - 250 mm diameter, 55SH rubber sanding roller, 15 kW - Pneumatically activated On/Off selector for the second roller, actuated by pneumatic cylinder, including micrometric position adjustment according to sanding belt thickness - Reverse motion for the second unit THIRD UNIT "CS" - 175 mm diameter sanding roller - Electronic segmented pad on the third unit Includes LOGIC TS electronic programmer • Distance between segments: 60 mm • Working pressure adjustment - Pneumatically activated On/Off selector for the third roller Roller supports at infeed and outfeed for long elements Fixed cleaning unit at the outfeed Electronic positioning of the worktable The machine was purchased new from an authorized SCM Poland dealer and has always been serviced by authorized SCM service. The last calibration was performed on 16.01.2025 Machine available from mid-July Number of operating hours: 589h

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cjdpfx Aow Naanjb Tshf MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.

Condition: used, Year of construction: 2005, SECOND-HAND WIDE BELT SANDING MACHINE DMC MOD. TECHNOSAND TC 1100M3 DA MM. 1100 - CE RULES - Rubber roller - 18.5 kw - 90 sh - diam. 250 mm - Rubber roller - 15.0 kw - 70 sh - diam. 250 mm. - Rubber roller - 11.1 kw - 40 sh - diam. 330 mm - N. 3 indipendent motors - Working width 1100 mm - Device for short pieces - Year 2005 Chjdpfx Absmxggyo Tef

Condition: ready for operation (used), Working width: 900mm Steel calibrating roller Combination unit with a rubber roller Motor power: 11kW Pneumatic shoe adjustment Cedpfxew Dqy Ne Ab Tjhf Pneumatic oscillation with a photocell Element thickness gauge Electric table adjustment Star/Delta start-up Power supply: 380V

Condition: ready for operation (used), Year of construction: 2001, Bütfering Classic 211 CE wide belt sander Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm constant table top head infeed 1st unit type C combined contact roller sanding pad unit with -profiled steel contact roller. -Electronically controlled sectional sanding pad, element width 50 mm -Motor power 15kW 2nd unit type E -Sanding shoe unit -electronically controlled link pressure beam, element width 25 mm -Motor power 15 kW -Infinitely variable sanding belt speed 2 to 18 m/s via frequency converter Synchronous and counter-rotation -Belt blow-off device Codpfjt Ucp Ujx Ab Tohf Transport carpet with infinitely variable feed2.5 - 13 m/min Vacuum clamping device 4 kW Control of the suction slides Roller tables in the inlet and outlet Workpiece cleaning : Rotating cleaning brush 0.75 kW Machine function tested Price 15500.- year of construction 2001

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Dedusting brush: yes Motor power: 2 x 15kW Cedpfx Abew I U N Io Tehf Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2002, machine/vehicle number: 4606221, SECOND-HAND WIDE BELT SANDER VIET CHALLENGE MOD. 211/B RR - CE RULES - Working widht mm. 1100 Codpfx Abswrn N Ds Tehf - 1st rubber roller diam. 180 mm. - 2nd rubber roller diam. 250 mm. - Vacuum - Belt dimensions mm. 2620x1130 - Motor Kw 18 - S/N 4606221 - Year 2002

Condition: ready for operation (used), Year of construction: 1997, Bütfering ECO E 1100 combination unit Sanding width: 1100 mm Minimum working height: 750 mm Maximum working height: 900 mm Workpiece thickness: 150 mm Csdow U Un Dspfx Ab Tjhf Abrasive belt dimensions: 1900 x 1120 mm Abrasive belt motor power: 11 kW Electronic sanding pad Feed rate: 4/8 m/min Year of manufacture: 1997

Condition: used, Year of construction: 2002, machine/vehicle number: 22002, SECOND-HAND WIDE BELT SANDER GIANTWAY BSG1300K-R-R - CE RULES 1° planner 22 kw 2° rubber roller 85 shore - 22 kw, diameter 240 mm. 3° rubber roller, 15 kw, diameter. 240 mm. - Brushing unit 0.25 kw - Vacuum table 5.5 kw - Cleaning brush behind the machine - Shoes presser - Inverter on conveyor feeding speed 0-19 m/min. 4 kw - Abrasive belts 1330x2620 mm. - Conveyor dimensions 1300x4820 mm. Cedpfxswrnpqj Ab Tehf - Blowers on abrasive belts - S/N 22002 - Year 2022

Year of construction: 1996, condition: used, SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - working width 1150 Chedoimtbljpfx Ab Tjf - volt. 380/50 - S/N 951121/DR3 - year 1996

Condition: used, Year of construction: 2004, machine/vehicle number: SA/005006, SECOND HAND WIDE BELT SANDER WITH 3 BELTS DMC MOD. UNISAND USK 1350 M3 - Steel roller - Rubber roller - Rubber roller - N. 3 indipendent motors - Working width 1350 mm - Device for short pieces - Touch screen control - S/N SA/005006 - Year 2004 - CE rules Csdpfxjwrnmpe Ab Tohf