Belt buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cjea9uv INCLINE CLEATED BELT CONVEYOR -- Incline Cleated Belt Conveyor -- 48" Wide belt conveyor -- 2" high cleats -- 16'6" long -- 2 HP motor -- Reconditioned with 90 days warranty -- Allow 8 to 10 weeks for delivery more
5
band width: 30 mm height over floor: 1100 mm extraction suction socket - diameter: 80 mm motor: 1400 Lij8f total power requirement: 3 kW weight of the machine approx.: ca. 250 kg space requirements of the machine approx.: 1,65x0,75x1,3 m POLITING & BELT GRINDING MACHINE Machine is equipped with a polishing wheel (D=340x30mm) Motor Revolution: 140 rpm Machine is in functioning condition more
1
width of the strips 200 mm band length 1490 mm table-size 540 x 280 mm engine output 1,5 kW Yjjiwxya2 total power requirement 230 V weight of the machine ca. 72 kg more
5
Conveyor belt smooth, 3.50 m long, 50cm belt width, 1.5kW MOTOR GEARBOXES. EURO 1 300.--+ VAT Dplsqpo2m more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cwdbf0bm TIMESAVERS "4321-45-01" Wide Belt Sander; 2-Head, 43" max. width [...] configuration: -- 1st Head: 9-1/2" Dia. rubber covered contact roll, 40 HP motor. -- 2nd Head: Combination head with 6" dia. rubber covered contact roll, and 2-1/2" wide finishing platen with dial indicator, 30 HP motor. -- 52" x 103" Abrasive belts with dual "Posi-Trak" electronic solid-state tracking; conveyor belt feed with AC inverter variable feed from 15 - 45 FPM, . ... more
3

Wide Belt Sander SCM Sandya 1/S CS95

The Railway Tinahely, Y14 TC97 Wicklow, IEIreland
5475 km
excellent (used)
SCM Sandya 1/S CS 95 Wide Belt Sander - Very lightly used, - Fast easy belt changes. - Grooved steel calibrating roller, Ncuar - electronic start positioning, - automatic feed belt tracking. - Working width 950mm - Working height 4mm to 170mm - 970mm sanding belt width - 3 phase 15hp main motor. more
3
band width: 80 mm band length: 3500 mm revolutions per minute of the motor:: 1450 extraction suction socket - diameter: 80 mm total power requirement: 3,0 kW weight of the machine approx.: 300 kg space requirements of the machine approx.: L:2,0xB:0,75xH:0,95 m Belt grinding machine Belt regulation done through manual clamping device Motor revolution: 1450 rpm Accessory: Grinding belt 3500x80mm with P 180 wound up on a roll and motor. Srabcg Machine funktional [...] more


belt
every day

New machines via email!

Be informed!
1
width of the strips 200 mm band length 1490 mm Us2xoeyz table-size 540 x 280 mm engine output 1,1 kW total power requirement 380 V weight of the machine ca. 72 kg more
5

Wide-belt sander Buetfering Classic 113-E

TreuchtlingenGermany dealership location
6763 km
1999
good (used)
1 Combi unit Working width of 1350mm Constant table Steel roller, smooth O7clbytz electronic links pressure bar with 50 mm pitch Operating terminal with the ability to memorise the program Cleaning brush Infeed table extension 300 mm more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 33ykoc89 KUNDIG TOPIQ 2-43 RC Wide Belt Sander (2) Heads;43" width cap. Drum, Combination Head,Head Configuration: -- 1st Head: Rubber covered contact roll, 6-1/4" Dia. (80-Shore), 20 HP motor. -- 2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll 50-Shore) and 3-1/8" wide "air inflatable/cushioned" finishing platen, 20 HP motor. Specifications: -- Abrasive belt size 43" x 75", with air tensioning & electronic abrasive belt tracki... more
6
Sanding width : 2550 mm Twin cross belt, each with 18,5 kW motor, 1500 rpm Single belt speed Each belt with pneumatic pressure beam Feed by parallel carpet strips, variable feed speed Etjeuh8 Motorised height adj. of the table more
8

Wide belt sanders, brand Stemac Stemac Combi

Via Del Lavoro 19, 33048 San Giovanni al Natisone (Udine), ITItaly
7089 km
good (used)
Wide belt sanders, brand Stemac, composed of a Pad-Roller and a brushing machine, usable for sanding solid wood, 1100 mm working width. Used. Bb7jstaufe more
1
width of the strips 100 mm band length 920 mm engine output 0,35 kW saw band speed 7 m/sec. Table surface 300 x 150 mm Cum7fvt roll diameter 58 mm dimensions 460 x 400 x 210 mm voltage 380 V weight of the machine ca. 15 kg more
6
Type: KCSB 1100 used machine working width: 1100 mm Ljvp7 combi unit contact roller 80° shore Year of construction: 1985 location: Warehouse / 82281 Herrnzell more
1
Elect./Voltage: 208/480 V, 60 Cy, 3 Ph Bbuubqbob3 TIMESAVER 137-2HD60 Wide Belt Sander (2) Heads; -- 36" width cap. Drum, [...] Configuration: -- 1st Head: 6" dia. serrated rubber contact drum, 20 HP motor. -- 2nd Head: Adjustable graphite-coated polishing platen with air bag veneer option, 15 HP [...]: -- 37" x 60" Sanding belt size. -- Power bed raise and lower with digital readout. -- 1/4" - 7" Thickness range. -- Electronic variable speed feed 15 - 45 FPM, Feed motor 1 [...] ... more
1

Conveyor belt SCHUMA 4600x400

ComplastGermany dealership location
6765 km
2006
used
Belt width:400 mm Belt length:4600 mm Total belt loading:50 kg height adjustment:740 mm Bbiritb9ic electrics - voltage/frequency:400/50 V/Hz engine output:0,81 kW weight:120 kg dimensions:4,7 x 0,7 x 0,8 m Payment: 100% prior to delivery more
1
width of the strips 300 mm band length 2.070 mm table-size 750 x 380 mm C2v2asze 7,5 m/sec engine output 1,5 kW total power requirement 400 V weight of the machine ca. 85 kg more
4
"machine wide belt sanding maschine manufacturer Heesemann type DBV 2-0/U part Id-no. 2148690 year of construction 1982 ... more
1
Elect./Voltage: Wth2g GRIZZLY G0486 Wide Belt Sander (2) Heads -- 42" Width cap. Drum, Platen --Head Configuration: --1st Head: - Rubber covered contact roll, 7-7/8" dia. -- 2nd Head: Finishing platen, 2-1/4" width --Specifications: --25 HP motor driving both heads; -- 43" W x 75" L abrasive belts with air-jet tracking. -- Motorized part thickness adjustment with key pad entry and LED readout, 0" - 6" opening; --Infeed & outfeed spring loaded rubber covered hold down rolls --Feed ... more
15
We offer: Conveyor belt conveyor 210x30x-120 cm band defek speed control to height and angle adjustable, fahrlbar on 4 wheels. Defective tape. otherwise functional Manufacturer: Wini Type: per person. No. dto. Year of constr.: dto Mass volume: ca. 210x38cm Mass system: ca. 210 + 55 cm Adjustable height: up to 120 cm Angle: adjustable Cut band broken here, length ca. 425 x 38/30 x 0,5 cm Belt speed: regekbar in 10 stages 2-6 RPM Mobile: Yes on 4 wheels Connection: 220V 50 Hz DC ... more
1

Conveyor belt M-Fördersysteme GFR

ComplastGermany dealership location
6765 km
2010
used
Belt width:400 mm Belt length:3400 mm Bbirijqzub Total belt loading:50 kg height adjustment:200 - 1000 mm electrics - voltage/frequency:400/50 V/Hz engine output:0,81 kW weight:80 kg dimensions:3,5 x 0,7 x 1,2 m Payment: 100% prior to delivery more
7
1x Belt ..... x 50mm 1x Polishing Center height 965mm Speeds 1800-3600 rpm Motor power 5,5 KW Tte2edi MARCELS MASCHINEN CH more
5
Bain7u0fy3 "machine long belt sanding machine manufacturer Johannsen type T 88-K part Id-no. 2156008 belt speed 22M/S m/s ... more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbut8heqfr TIMESAVER 337-2 Wide Belt sander (2) Heads --36" width cap. Drum, Drum --Head Congiguration: --1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 30 HP motor --2nd Head: 11-1/2" Dia.. spiral grooved rubber contact roll 20 HP motor. -- Equipped with & Features: --37" x 75" Abrasive belts with pneumatic tracking, 2 HP feed drive -- Variable feed speed from 20 - 60 FPM. -- Infeed & outfeed spring loaded holddown rolls on both heads. ... more
15
We offer: Conveyor belt conveyors MTF NL IE010 210/66 x 30 x - 120 cm clocked or installed in height and angle adjustable, fahrlbar on 4 wheels. Defective tape. otherwise functional Manufacturer: MTF technique Bergneustadt Type: NL-IE 0110 No. 6105 Year of construction: 1999 Mass volume: ca. 210/55x30x38cm Mass system: ca. 220 + 50cm Adjustable height: up to 120cm Angle: adjustable Cut band broken here, length ca. 520 x 38 / 30 x 0, 5 cm Belt speed: 2-3 m/min Mobile: Yes on 4 whe... more
8

wide belt sander Bütfering AWS 2 CE

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1991
ready for operation (used)
Type: AWS 2 CE used machine working width: 1100 mm 2 units combi unit contact roller 85° shore electronic sanding pads shoe unit F3yjshz electronic sanding pads 2 brushing units with seperate motors Year of construction: 1991 location: Warehouse / 82281 Herrnzell more
2

Belt saw machine PLOVDIV BU 801

HamburgGermany dealership location
6495 km
1977
used
roll diameter:800 mm Irq7amx23 throat:800 mm dayligth:500 mm table-size:1200x900 mm Motor output:670 U/min total power requirement: kW weight of the machine ca.:950 kg dimensions of the machine ca.:1500 x 1100 x 2400 mm The machine is equipped as follows: - pivotable table for mitre cuts - foldable parallel stop - height-adjustable roller guide - suction with chip pipe 1500 mm more
2

transport belt JOSTING

RietbergGermany dealership location
6468 km
2005
used
machine transport belt Daj2mud manufacturer Josting part Id-no. 2080469 year of construction 2005 site Rietberg ... more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Glqkum9ry TIMESAVERS 237-3 HP Wide Belt Sander -- 3-Head, 36" cap. - (2) Contact rolls, and (1) Finishing platen. -- 1st Head: Rubber covered contact roll, 9-1/2" dia., 30 HP motor; -- 2nd Head: Rubber covered contact roll, 30 HP motor. -- 3rd Head: Finishing platen, 2-1/2" width, 20 HP motor; -- 37" x 75" abrasive belts with "POSI-TRAK" electronic tracking. -- Motorized part thickness adjustment with automatic part thickness set-up, mechanical digita... more
15
We offer: Conveyor belt conveyor 210 x 30 x 40 / 90 cm 24 m / min adjustable on 1 stand band is operational. Manufacturer: Wini Type: unknown Martin No. Year of built: unknown Band dimensions: 200 x 30 cm ribs every 40cm Mass system: 200 x 50 cm Height: 40-90 cm Angle: adjustable Belt speed: 24 m / min Mobile: no only movable Connection: 400V 50 Hz Bbylnip0gn Gear motor: Lenze 180 W Weight 150 kg State. used see photos, ready to be used, as is, Next conveyor belts on sal... more
3

Sanding belt rack

D - Nordrhein-WestfalenGermany dealership location
6504 km
used
mit 5 Rohren zum Aufhängen von Schleifbändern - Wagenbreite: 1500 mm - Wagenhöhe: 1900 mm - Wagentiefe: 1000 mm Bbxtki79zs - Nutztiefe Rohr: 1400 mm - Räder: 4 St. Polyamidlenkrollen, Durchmesser 150 mm ( 2 St. davon mit Festesteller) - Rohrdurchmesser ca. 152 mm - Farbton: Lichtgrau RAL 7035 Lieferzeit ca. 2 Wochen more
7
With 2 grinding units consisting: -1 x calibration roller -1 x Combi unit used, excellent condition, little went Make Maka Type CG / 110 2 RRT Built in 2001 M000057731. No. Grinding width 1100 mm Clearance height approx. 160 m Number of tapes/aggregates 2 Bands 2 pieces from the top 1 x calibration roller rubber 1 x Combi unit Roller table at the inlet Bbxg0kubxu Roller table at the outlet 2 speeds Suction connection Storage location: Mid-May to warehouse 54634 Bitburg com... more
6
machine wide belt sanding maschine manufacturer Heesemann type LSM4-U part Id-no. 2071152 year of construction 1992 ... more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. 33mm9b7x TIMESAVER 243-2IC Wide Belt Sander (2) Heads; ... 2-Head, 42" width cap., Drum, [...] Configuration -- 1st Head: 11-1/2" Dia. rubber covered spiral grooved contact roll, 50 HP motor. -- 2nd HEAD: 11-1/2" Dia. rubber covered spiral grooved contact roll, 50 HP [...]: -- 43" x 75" Abrasive belts with air tensioning, "POSI-TRACK" solid state electronic abrasive belt sensing system, flip up abrasive belt loaders. -- Conveyor belt feed system with... more

Belt grinder HUVEMA HU 100 PG-4

Ab Auslieferungslager HollandGermany dealership location
6378 km
1917
used
working area 76 mm Number of stations 1 0 material length beliebig mm 789t399cs tube diameter mm grinding band dimension 100 x 2000 mm Band Speed 30 m/sec motor speed 2800 U/min 0 3 kW range L-W-H 1,3 x 0,5 x 0,8 m weight 200 kg more
9
With 2 grinding units consisting: -1 x calibration roller -1 x shoe unit Make SCM Type CL 110 K RT Built in 1994 . No. 020608 Godecb8ps Grinding width 1100 mm Clearance height approx. 160 mm Number of tapes/aggregates 2 Bands 2 pieces from the top 1 x calibration roller rubber 1 x Unit with controlled Luftschuh Calibrating roller Dust brush Roller table at the inlet Roller table at the outlet 2 speeds Suction connection D 2 x 180 mm, 1 x 160 mm Total connected load: locatio... more
6
machine wide belt sanding maschine manufacturer Heesemann type LSM 4 part Id-no. 2071153 year of construction 1992 ... more
1
Elect./Voltage: 208/230/460 V, 60 Cy, 3 Ph Clqklvv TIMESAVER SPEEDBELT 252-3 Three Head Wide Belt Sander.3-Head, 51" cap. with (2) Contact rubber rolls and (1) Finishing platen. --Head Configuration: 1st Head: Rubber covered grooved contact roll, 9-1/2" dia., 40 HP motor; 2nd Head: Rubber covered grooved contact roll, 9-1/2" dia., 30 HP motor; 3rd Head: Finishing platen, 2-1/2" width, 30 HP motor. -- Specifications/Features: Belt size 52" x 75" Abrasive belts with POSI-TRAK electronic t... more
2
Manufacturer: Büttfering, Type: FBS MA 2, Year: 1988, Monting of the machine: Q / Q , Sanding width mm: 1100, Sanding hight mm: 900, Number of sanding belts: 2, Constant table hight: yes, Teppich und Lager vor kurzem erneuert, Year :1988 Ra3jqugkq more


belt
every day

New machines via email!

Be informed!

to

to

Change search
BELT
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close