Wide-belt sander

HEESEMANN LSM 8

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group Bodpfsr Iyvmsx Acnjdg blower group on outlet

Condition: used, machine/vehicle number: 008350, Type of edging: Thin edge, Thick edge, Solid wood Bsdpfex A Tgyox Acnodg Gluing System: PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Bdedsv R Nk Ujpfx Acnsg Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Location: Flörsheim

Condition: new, Year of construction: 2025, machine/vehicle number: 982988248, Frumecar Modulmix 2000 concrete batching plant Bdedshd I Tvopfx Acnog Year: New Capacity: 90 m³/h - 4-5 aggregate hoppers / in-line arrangement - Hopper capacity: 60 - 120 m³ - Mixer size: 2.0 m³ / 3000 liters - K2 fully automatic computer system - Electric control system: Siemens S7 - Cement screw diameter: 273 mm - Cement silo: 1-4 - International assembly included - 2 years guarantee from start-up - Winter housing possible This offer is subject to change, and may contain input errors and mistakes. Only the specific agreements in the order confirmation or sales contract are valid. More machines and mixing plants are available on our website. Further information: Intended use: Construction Usable material: Concrete General condition: very good Technical condition: very good Optical condition: very good

Condition: used, Technical data: Max planing width: 630 mm Max planing height: 250 mm Knife shaft diameter: 120 mm Number of knives: 4 1 roll in the countertop Feed speed: 6-18m/min Bdedpfx Aolp N Tyecnjg Electric lifting Power: 400V Motor power: 5.5 kW Overall dimensions: Length: 1300mm Width: 980mm Height: 1120mm

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Bodpfx Aoxy Tm Iocnjdg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Maximum panel thickness: 60 mm Edging unit Bdsdpfx Acjyziutjnsg Gluing unit with glue tank Trimming unit Rounding unit Edge scraping and gluing unit Brush unit "StarTouch" control system replacing Orion 110 Only 30,217 meters of edge material processed (statistics from 12.03.2026) 4,482 hours

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Edge banding thickness: max. 8-55 mm Edge banding with rounding unit: max. 45 mm Strip edge banding thickness: 0.4 - 8 mm Roller edge thickness: 0.4 - 3 mm Bdedpfsw Nadgsx Acnog Feed rate: 12 m/min Incl. rotatable control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. CNC-controlled chamfering, radius, and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. flat pull blade Incl. groove unit Incl. scraping unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: refurbished (used), Year of construction: 2018, workpiece height (max.): 60 mm, edge thickness (max.): 15 mm, feed rate X-axis: 20 m/min, actuation type: electric, total length: 6,200 mm, overall weight: 3,100 kg, Tornado+ – Fully Refurbished / AS NEW Spray devices GS, RS optional, texture finishing possible Joining, gluing, edge banding, flush trimming, radius milling, corner copying AKF, scraper blade R1/R2 with foil function on unit 1 Belt overlay / Synchro-Flex PUR gluing included in the basic equipment Workpiece dimensions: Width, minimum: 70 mm Height, minimum: 8 mm Height, maximum: 60 mm Length, minimum: 150 mm Panel thickness: Max. 60 mm Edge thickness: 0.3 – 15 mm -CM – CombiMelt gluing system Bedpfx Aozkk Drjcnjdg Modular design for easy replacement of the pre-melting tanks. Suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules. Any type of adhesive can be processed with all working parameters (such as dispensing quantity, pre-melting and working temperatures) via individual work programs. -Individual inverters with full flexibility for individual activation of the individual processing motors via a power bus system. Special feature: Machine with speed package! 20 m/min with corner copying!! Tools and chain plates – NEW Sale of the machine with warranty possible. Inspection and demonstration possible at any time by appointment.

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control POWER CONTROL PC23 Powertouch / WoodCommander (TAPIO Ready) Feeding speed m/min 16-25 Bdedpfxezku Rps Acnog Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 2 x Kw 3 Lamps to heat the workpieces side Glueing Unit (Hot Melt + Quick Melt Unit) FE-MA-TECH + QA/PU + PU65 Band Pressure zone (N.C. adjustment) "C 7" Edge coils supporting unit (No. 2 reels) with SERVO-control edge feeding Snipping (end-cutting) unit PK 25 (2 x Kw 0,8) max 25 m/min Rough Trimming unit BF20 (2 x Kw 1,5) Fine Trimming unit (Multiprofile) MF21 (2 x Kw 0,55) swevelling 0°-20° Multi Function Unit (Profile contour Trimming unit) FK 30/V20 (1 x Kw 0,7) adjustable by NC Milling-grooving units SF 21 (1 x Kw 5) 0°-90° Profile edge scraping unit MN 21 (Multiprofile, by N.C.) Glue scraping Unit FA 20 Buffing unit FA06 (2 x kW 0,18) + Free Space