5
We sell cheap:
Used paper belt filter unit from BEDA Filtertechnik, type 1020, with coolant tank volume approx. 300 l, coolant supply pump 2 bar approx. 60 l/min, filter fleece width 500 mm, with drip tray and collecting container for grinding sludge.
Goxl8i7
Year of manufacture 1985, coolant supply from a Reinecker tool grinding machine WS-50 with corresponding inlet trough, inlet height 550 mm.
For filtration of aqueous cooling lubricants/emulsion on tool grinding machine, surface grinding mac...
2
Filter unit with both paper band and cartridges for Micro particules.
Piping and heat exchanger pre-installed for recooling the fluid.
Cooling Pump 9 bars - 60 L/min
Perfect for oil, synthetic, or emulsion
Tank 350 liters
Unit completely checked
C0qkhlh
10
Polo
We offer here a suction belt filter.
Technical data:
Bu2stwinyg
L 3 = over all (mm) 5670
L 1 = mounting dimension (mm) 4450
Weight unfilled (Kg) 4050
max. flow rate (l/min.) 3800
capacity approx. (l) 4410
Max. capacity 4500 litres
Operating pressure -100 mbar
Operating temperature 80 C
Flow rate 2000 l per minute
Sale ex location!
Type: SAFI-C5 1E
Condition: used / used
Scope of delivery: (see pictures)
Further questions we can answer on the phone for you.
Written order possible by email o...
coolant unit (paper belt)
Bz7vbit3s8
electrical (plug-in) and mechanicaly prepared
f. JUNG HF50 / JF520 / JF625
- with your inquiry, pleas send us the type of your machine
- in stock, subject for prior sale
3
Bandskimmer
Brand Polo filter Bremen
Immersion depth maximum 600 mm
Band width 100 mm
220 volt
Bcqdshcybc
Operating voltage 24 volt
Weight 11,5 kg
Shipping dimensions: L. 420 x B. 260 x H. 550 mm
3
Overband plate magnet from remaining stock / overproduction
Bivrsqo23z
Version in VA 1.4301 tightly sealed
For sale is a plate magnet with threaded holes on the back.
The magnet can be mounted either as a "police magnet" or also for filtering out metal impurities above a conveyor belt.
Ring eyelets for suspension are supplied.
Magnet block dimensions:
620 x 420 x 250mm
Only 1 piece available at short notice.
Many other dimensions available from stock.
3
Permanent overband magnetic separator
Gb8onjrz
TYPE PEM2000
1800 x 1000 x 400mm
=====
4x eyebolt for suspension
Rubber band GB30
Magnetic dimensions: 800x500mm
5
Conveyor belt, belt conveyor, conveyor belt, belt conveyor
-Speed: 0.8 m/sec
-Drive: 0.12 kW
Beudhxnkbn
-Belt width: 790 mm
-Length: 605 mm
-Body made of: aluminum
-Transport dimensions: 950/630/H955 mm
-Weight: 58 kg
12
Geppert belt AM-F 7.30m x 0.30m with drive
The plastic modular belt AM-F is characterised by its slim design. The width of the frame is only 14mm more than the chain. At the deflection it is also only 40mm more. The frame including the chain is 95mm high.
The modular plastic chains of the AM-F are optimal to clean, particularly hard-wearing and maintenance by replacing individual links is easy to realise.
Technical data:
Year of manufacture: 2012
Length: 7.30m
Width: 0,30m
Bxonwwj0tz
Height: 1...
Band-all semi automatic banding machine.
B037e0be
5
I sell the band conveyor suitable for Industry use, for example wooden industry, material manipulation etc.
Total length 4,20m
Band width 650mm
Feeding with electric motor 0,37kW / 0,55HP
Fully working. Available immediately.
Ft9uptn0e
Repair needed: Chain wheel on the feeding spindle.
1
Wide belt sander with 1100 mm sanding width
1. aggregate rubberized roller
2. aggregate electron. 3 stage motor with left and right rotation selectable
3. aggregate electron. Electronic link shoe with infinitely variable belt speed
4. blowing duct
Cxzakcg
2 stage feed
Vacuum carpet
4
Bear cooling lubricant plant scraper conveyor BJ 88 with centrifugal pump for 1200l/min ,with overlying magnetic separator Liqui Filter BJ 2013 for 1300l/min
B8qv38rvb2
5
Air bellows, roller bellows, air cushions, air filters
-Mann air filter housing with: filter
Bfnz8qkfr9
-Inlet/outlet: Ø 80/70 mm
-Part Number: 43 905 63 8981
-Dimension: Ø 260/400 mm
-Weight: 11.5 kg
4
Length: 2963mm, width: 1360mm, height: 1809mm.
Bxf3u8qgts
1
PLASMA suction and filter system
FILTERBLOC - TFK PL Series
Special central exhaust and filter system for plasma smoke during cutting and burning of the FILTERBLOC TFK PL series
Nwxgr2ddy
TUeV certified manufacturer according to DIN EN ISO 15012 and CE drawing
FILTERBLOC - TFK PLASMA 40/60/80
Engine power 5,5/7,5/11 KW
Air volume 4000/5500/6200 m3/h
Filter area 124/186/248 m2
dust container 4x/6x/8x 84 litres
Automatic jet cleaning
System with test for welding smoke class W3
12 months warrant...
13
Band saw with feed CB 900
- after the technical review
- very good condition
TECHNICAL SPECIFICATIONS:
engine power 12.6 kW
max. cutting height 460 mm
cutting height with a feed of 240 mm
max. cutting width 680 mm
cutting width with a feed of 130 mm
max. workpiece width 330 mm
O2iu7
max. belt width 80 mm
10 types of feed speed 2.5 / 4/5/7/8/12/14/19/24/38 m / min
table top dimensions 970 mm x 810 mm
adjustable table top
double-sided tape guiding
table top height from the base 1000 mm
machine...
10
HOLZMANN HBS 500 band saw
Manufacturer HOLZMANN
Model / type of the HBS 500 machine
Production year 2014
Machine category Band saw
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Iejqh3r
Startup Type
to be agreed
Description
Comments
2.2 kW ENGINE, 500 mm WHEEL DIAMETER, TABLE SET AT ANGLES, VERY GOOD CONDITION, ADDITIONAL SAWS AS TOOLS
9
This device was part of oil mill which was installed and never put in use.
Condition is mint and there is no need for any additional maintainance before it will be put in use again.
With filtration tank there is electrical cabinet with all the documentation and automation programing.
Filter is located in Vukovar and it is possible to see it there in place.
Ser. Br. 114076
Filter: 84 m2
Volume: 7115 dm3
Filter elements: 18
Working preassure: -1 - 6 bar
B2memfxmju
Working temperature: 0 - 15...
5
Air bellows, roller bellows, air cushions
Bfns3j7xoi
-Mann air filter housing
-Inlet/outlet: O 52/46 mm
-Part Number: 44 100 92 921
-with air filter: C 11 100
-Price: per piece
-Number: 8 pieces
-Dimension: Ø 190/285 mm
-Weight: 1.15 kg
7
This plant was used to sort and convey small brushes.
Very good condition and was little used. There are two
plants available.
E3kgigves
2
Laser smoke extraction and filter systems
FILTERBLOC TFK LA Series
Special central suction and filter systems for laser smoke of the FILTERBLOC TFK LA series
TUeV certified manufacturer according to DIN EN ISO 15012 and CE drawing.
FILTERBLOC LASER 30/40/60
Engine power 3KW/4KW/5,5KW
Air volume 2500/4000/4500 m3/h
Filter area 93/124/186 m2
dust container 3 x 84 litres/4 x 84 litres/6 x 84 litres
Automatic jet cleaning
System with test for welding smoke class W3
12 months warranty
Enakeyr
The pri...
3
Filtration substation-reconditioned
air flow rate mc/h 20.000
structure galvanized metal
dimensions 3600 X 2450 mm x H 6000 mm
sleeve filtration with mechanical vibration cleaning
Bxpku8qie7
Auger, star valve for exhaust
N° 01 electro aspirator Kw 22
n° 01 electrical control panel
staircase, parapet, chimney emission
2
For sale is a complete filter unit of Berkefeld Filter.
Everything in good condition (used)
Bel70qroqi
More photos and information on request.
A visit is possible.
3
A used suction fine filter system is available.
Manufacturer: INTENSIV-FILTER GmbH & Co.KG
Dovqgmzjk
1080 cubic meters per hour.
5
Air bellows, roller bellows, air cushions
Busfjwv3
-Mann air filter housing
-Inlet/outlet: Ø 39/39 mm
-Part Number: 45
-Price: per piece
-Number: 2 pieces
-Dimension: Ø 173/165 mm
-Weight: 1.8 kg
5
Hydraulic filter, filter element
-Manufacturer: SF Filter, filter element OVP
Bnvyswmvaf
-Type: HY 20659
-Dimension: Ø 78 x 210 mm
-Weight: 0.6 kg
8
Hydraulic filter
-Type: RG 045/070/RE045G20B
-Number: 8 x available
Qlws80xiq
-Price: per piece
-Weight: 0.5 kg
4
Hydraulic filter
-Type: HY13479
-Number: 10x available
-Price: per piece
-Weight: 0.5 kg
Dmhrwc2
8
width of the strips 150 mm
band length 1220 mm
dimensions of grinding wheel 225 mm
work table: 150 x 400 mm
Table tiltable up to 90 Grad
table surface area 150 x 130 mm
connected load frequency 230 V
total power requirement 0,75 kW
Biata03nsz
weight of the machine ca. 35 Kg
dimensions of the machine ca. 650 x 360 x 400 mm
6
mit Brikettierpresse Nestro NBV 55 Bj. 1996
inkl. 2 Ventilatoren 250 mm D ( 2 x 5.5 KW )
mit Rückluftkanälen
mit Löscheinrichtung
mit Ölheizung für den Ölbehälter der Presse
Filterflächengröße ca. 86 m²
Maße : 2000 x 2000 x 5500 mm
Gewicht ca. 1000 kg
Ca2wpnw3y2
Lagerort: Nattheim
13
8
Used metal sawing machines
Circular saws, hacksaws, band saws and accessories
Michael Maurath Metallsägen has been in the business of buying and selling used sawing machines for more than 25 years.
We enable companies and enterprises from the manufacturing and processing industry to purchase used metal - sawing machines, which are needed for daily work processes, at a reasonable price.
Whether band saws, circular saws, hacksaws, roller conveyors, measuring systems or accessories.
-- Used saw...
6
width of the strips 100 mm
band length 915 mm
dimensions of grinding wheel 200 x 32 mm
grinding wheel hole diameter 30 mm
total power requirement 0,9 kW
Engr2fxby
weight of the machine ca. 35 Kg
dimensions of the machine ca. 620 x 540 x 300 mm
4
•The machine is designed exclusively for cutting soft, hard, dry, raw or frozen timber or wooden prisms, with lengths according to the machine designs
•the cutting length depends on the number of expanding sections
•all types of timber can be cut with the same band
K7arpxbd
•solid and twist free construction
•low level of required maintenance
•easy handling
•massive cast iron drive wheel
•eccentric clamp system
•manual height (thickness) adjustment
•manual cutting feed
•3,7 m cutting length base...
1
neu
ca. 10 Wochen ab Auftrags
Italien
81250
1486.88
5320x34x1,1 mm
18/100 m/min
510 mm
480 mm
650x450 mm
rund 440 mm, quadrat 440
rund 250 mm, quadrat 250
rund 440 mm, quadrat 430
rund 250 mm, quadrat 250
845 mm
3 kW
3865 mm
2870 mm
2300 mm
5100 kg
Es00a8qw
full automatic band saw
integrated keyboard with CNC control
large RAM memory
save over 300 cutting programs
strong steel structure
single-block gear motor
no vibrations during cutting
adjustable descent s...
cutting diameter 250 mm
saw band length 2950 mm
cutting width 280 mm
2950 x 27 x 0,9 mm
285 mm
36 / 72 m/min
250 mm
220 mm
280 x 220 mm
120 mm
140 x 80 mm
80 mm
200 mm
links 220 x 200 / rechts mm
links 200 / rechts 170 mm
1,86 kW
0,4 t
1,8 x 1,3 x 1,8 m
Powerful miter band saw for cuts from 45 ° right to 60 °
Left
CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the
Feed and switch-off at the end of the cut)
Manual cutting cycle
Su0ezc
AUTOMATIC CUT: (via...
6
Vertical ribbon saw JAESPA type MSU 4
Fabr. No. 724749 built around 1980
Qq0a3a8
Role diameter 420 mm
Exoffload 400 mm
Table size 610 x 610 mm
Cut height 260 mm
Saw length min. 3200-max. 3400 mm
Sawmill speed 10-1500 m/min. continuously
Grid connection 400 volts, 50 Hz
-continuous sawmill speed over 2 transmission levels and continuously over belt thief
-Sawdust table swivel
-Sawdust stump welding machine IDEAL BS0-16
-Sawdust scissors
-Grinding stone for grinding the weld seam
Space required L ...
4
cutting diameter 500 mm
Nndbf
saw band length 1.800 mm
table height 1.100 mm
rotary indexing table -manual operation
weight of the machine ca. 0,9 t
2
Horizontal band saw FABRIS type BS 260 DS - DA
Qm30z
Ser.# 6432 Year of manufacture 2005
Technical data:
Cutting capacity 90° round 220 mm
90° square 200 x 200 mm
90° rectangular 260 x 140 mm
45° round 160 / 120 mm
45° square 160 x 160 / 120 x 120 mm
45° rectangle 160 x 160 / 150 x 100 mm
60° round 100 mm
60° square 100 x 100 mm
60° rectangle 120 x 100 mm
saw blade size 3150 x 25,4 x 0,9 mm
band dimensions 2450 x 27 x 0,9 mm
flywheel diameter 300 mm
offcut 1,2 m...
1
Saw band length 4400 x 34 x 1,1 mm
band speed 15 - 150 m/min
cutting range at 90 degrees: round 335 mm
Cutting range at 90 degrees: square 500 x 335 mm
Cutting range at 45 degrees right: around 330 mm
Cutting range at 45 degrees right: square 320 x 335 mm
Cutting range at 45 degrees left: about 305 mm
Cutting range at 45 degrees left: square 305 x 335 mm
Cutting range at 30 degrees right: around 180 mm
Cutting range at 30 degrees right: square 170 x 335 mm
working height 750 mm
engine power 3 kW...
2
neu
ca. 10 Wochen ab Auftrags
Italien
68940
1261.6
5900x41x1,3 mm
15/150 m/min
360 mm
360 mm
360x350 mm
878 mm
3 kW
5,5 kW
2800 mm
1794 mm
2210 mm
3500 kg
XT4 is a highly productive two-column band saw that meets a variety of cutting requirements and combines advanced technology with an extremely solid mechanical structure. There is a system that allows the vices to retract to prevent the saw blade from rubbing against the cutting surface during the ascent of the saw fr...
7
for sharpening bandsaw blades up to 180 mm blade width, tooth pitch 20 to 50 mm, 4 tooth shape cam quick adjustment, 3 feed speed quick adjustment, grinding dust extraction, blade guide with 2 guide rollers and with exact height adjustment via worm drive, completely disassembled and workshop reconditioned
B97iqfaqex
6
Vertical ribbon saw SELECT Type SB 4
Masch. No. 728122 built around 1985
Exoffload 400 mm
Role diameter 420 mm
Table size 500 x 500 mm
Cutting speed 20-240 m/min. continuously
Saw length 3200-3400 mm
Engine power 0.75 and 1.1 kW
Drive power 380 volts, 50 Hz
-continuous sawmill speed via belt variator drive
-Sawdust welding device IDEAL BS 0-16
-with grinding and scissors
-Machine light
Beurmnxl33
-Table tilt-able
Space requirement L x B x H 950 x 700 x 1900 mm
Weight 400 kg
Good condition
2