Used Vertical Boring Machine for sale (84,819)

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops Kodpohvi Dujfx Affofa The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: used, Year of construction: 1984, Row and Fitting Boring Machine Used machine Year of manufacture: 1984 Condition: Function-tested Technical data: Fully automatic pneumatic control with foot pedal Boring unit 1.1 kW Speed 2800 rpm Boring stroke 0–55 mm Stop ruler cross adjustable from 0–140 mm Kodjxdpkdopfx Affsfa Working height 850 mm Space requirement without extension rail 1000 x 750 mm Compressed air connection 6 bar Weight approx. 70 kg Includes various stops, boring heads, and drills Location: Flörsheim Availability: Immediate

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 11000 kg Measurements height 3100 mm Control Unit Brand FANUC Model Series 0i-TD Dimensions Machine Length 2750 mm Main Drive Spindle motor power 30 kW Number of axis 2 This DEFUM KNA-110 S0 vertical turning machine was manufactured in 2016. It features a maximum swing with upper support of 1350 mm and a table diameter of 1100 mm, supporting workpieces up to 4000 kg. The table speed range is 6.3–200 rpm with 16 speed steps. Main motor power is 30 kW. If you are looking to get high quality turning capabilities consider the DEFUM KNA-110 S0 machine we have for sale. Contact us for more information. Application Types Kfedpfxjx E Egmj Affja Turning

Condition: used, Year of construction: 1990, table: 900-1500 mm digital ja Kfedpex E Dt Ejfx Affoa weight 5 t

Condition: good (used), Year of construction: 1980, Precision horizontal boring and drilling machine with three boring spindles and one drilling spindle, max hole diameter 80 mm, spindle speed 3000/min Kedpfx Afox Ifp Hefofa

Condition: used, Year of construction: 1998, functionality: fully functional, warehouse no.: 503460 manufacturer: ARBURG type: Allrounder 1200 TS 400-150 controller: year of construction: 1998 clamping force: 400 kN min. mould height: 250 mm max. open daylight: 550 mm opening stroke: 300 mm round table diameter: 1200 mm screw diameter: 25 mm swept volume: 54 ccm injection pressure: 2500 bar equipment included: screen text german CEE-socket 16A rotary table Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 4.1m x 1.75m x 2.6m Ksdpfx Afex Eyynofefa total weight: 8000KG

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Kfsdjx A Td Eepfx Affea Y axis working area: 850 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, The FPK 5 is a top-of-the-line Conventional Vertical Milling Machine within the Toolroom Milling Machines category, offering a versatile and robust solution for various milling applications. This universal tool milling machine stands out with its vertical and horizontal spindle configuration, swiveling vertical head, and extensive clamping surfaces, making it an excellent choice for tool and mold making, repair workshops, and educational environments. Designed for flexibility, the FPK 5 excels in single-part construction and small to medium-sized batches, thanks to its easy setup and reliable operation without extensive programming. The machine features exceptional rigidity and performance, a heavy fixed-angle table with high load capacity, and a manual central lubrication system for optimal maintenance. With standard equipment that includes a coolant system, 3-axis position indicator, and easily accessible controls, the FPK 5 is engineered to enhance efficiency and precision. Experience the reliability of KNUTH engineering with this advanced milling machine; buy now to elevate your machining capabilities. Kfjdpfx Aswut Evoffoa

Condition: ready for operation (used), Year of construction: 1990, Main Drive Spindle motor power 115 Kw Number of axis 2 Additional Equipment Kedpjx E Ebksfx Affsfa Chip Extractor Complete Enclosure Cooling System Work Light Self-Centering Chuck Diameter: 2500 mm (removable) Refrigerated Electrical Cabinet This KOLOMNA 1532T vertical turning machine was manufactured in 1990. It features a robust design suitable for a variety of turning operations. If you are looking to get high quality turning capabilities consider the KOLOMNA 1532T machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Universal dowel drilling machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gear motor 2.2 kW with 21 spindles Spindle spacing 32 mm with integrated oil damping Height adjustment 80 mm Drilling depth 80 mm Dimensions: 140x88x160 Weight 420 kg Availability: short notice Kfsdpfxskwg Rco Affsa Location: Flörsheim

Condition: excellent (used), Year of construction: 2003, spindle diameter 105 mm, CNC Heidenhain TNC 124 table 1750 mm x 2000 mm spindle diameter 105 mm Kedpfx Ajx Ifmxjffofa x - 2500 mm, y - 1850 mm, z - 1400 mm, w - 700 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Kedpfx Aov A Hm Rjffefa Weight 110 kg Total power requirement 0 kw

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Ksdpfx Aelhwr Rsffsfa Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, The Servomill® UFM 8 V, a state-of-the-art Conventional Vertical Milling Machine from KNUTH, is designed to enhance efficiency and precision in various machining applications. With its horizontal spindle and swiveling vertical milling head, this robust machine boasts a wide speed range and a large clamping table that accommodates various workpieces and clamping devices. The Servomill’s advanced electronic features, including infinitely variable servomotor feed and electronic handwheels, provide users with the intuitive operation reminiscent of CNC systems without the need for programming. Ideal for repair workshops and training departments, the UFM 8 V combines conventional milling practices with significant advancements in reliability and maintenance-free operation, thanks to high-quality servo drives and preloaded ball screws. With an operational output of up to 5000 rpm and integrated features such as a coolant system and pneumatic tool clamping, this model promises both productivity and ease of use. Experience the next level of milling technology with the Servomill UFM 8 V. Request a quote today to see how this remarkable machine from the Conventional Vertical Milling Machines product group can elevate your production capabilities. Kfjdpfx Afjv Amixofoa

Condition: used, machine/vehicle number: 008258, X axis working area: 3500 mm Ksdpfx Aex A Hfcoffefa Y axis working area: 920 mm Main Electrospindle power: 7 KW Number of controlled axes: 3 axes Total number of drilling spindles: 15 Total number of tool changer positions: 4

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer. Kfedpjx H Aa Tsfx Affja

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Ksdpfx Afjx D Nd Dofefa Main Drive Tool taper IMS 76 Number of axis 3 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Application Types Turning

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 570x490x1720 mm Kodov A Hm Depfx Affofa Weight 90 kg Total power requirement 1 kw

Condition: good (used), Year of construction: 2017, functionality: fully functional, Technical details core drilling diameter max. 3 - 28 mm bore depth 1000 mm control Heidenhain TNC 640 x-axis 1000 mm y-axis 800 mm z-axis 800 mm spindle head - swivable (W) +15°/-30° deg B-axis (table) 360.000° deg table surface area 1000 x 1000 mm table load 5,0 t tool taper SK 40 spindle turning speed range 60 - 6000 U/min spindle motor 12 kW total power requirement 58 kW weight of the machine ca. 14 t Kfedpox D U R Aefx Affoa dimensions of the machine ca. 6,35 x 4,75 x 3,80 m Additional information 5 axes Deep Drilling-Milling-Machine A current geometry measurement report is available. Equipped with: HEIDENHAIN TNC 640 control 5 CNC AXES X – Y – Z – W – B NC rotary table 360.000 deg. Milling performance 150 cm3/min. Direct linear position measuring system Digital AC drives Table design with Hirschmann zero-point clamping system NC-controlled tilting of the deep hole drilling/milling unit (W) +15/-30 deg. Automatic tool changer for 24 tools Internal coolant supply High-pressure coolant system 1200 liters for deep hole drilling oil up to 140 bar Paper belt filter system SIEMENS extinguishing system Fire protection system Spindle cooling Oil temperature control 3D HEXAGON probe RENISHAW tool measurement Electronic handwheel OPT kinematics Chip conveyor Coolant pressure and flow control Collision and vibration monitoring Feed control Coolant gun MONTRONIX machine airbag Oil mist extraction 2 clamping plates Walk-in full enclosure with roof and opening for crane loading Included in delivery: Operating manual Documentation Machine parameters on USB stick

Condition: new, The KB 1400 is a high-performance Conventional Vertical Milling Machine within the Bed-Type Milling Machines group, designed by KNUTH for exceptional cutting capabilities. This heavy universal bed milling machine features wide guides and impressive drive power, making it ideal for plant and machine construction. Its vertical milling head, which can swivel ± 45°, along with a manually adjustable quill and infinitely variable spindle speed, provides versatility and precision for diverse machining tasks. The machine's robust gearbox allows for adjustable feeds in the Y- and X-axes, ensuring rapid traverse on all axes. With a table setup area of 1,400 x 400 mm and a travel distance of 950 mm, this machine can accommodate large workpieces and various clamping devices. The KB 1400 also boasts a solid Meehanite cast-iron frame, contributing to improved stability and reduced vibration, resulting in higher accuracy and productivity. Benefit from its extensive standard equipment including a 3-axis position indicator and coolant system. Experience the precision and robust performance of the KB 1400 – request a quote today to explore how this Conventional Vertical Milling Machine can enhance your operations. Kedpfxjwubzlo Affofa

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Ksdpfxowuclxe Affsfa Number of controlled axes: 3 axes Total number of drilling spindles: 11

Condition: new, The UWF 6, a leading model from the Conventional Vertical Milling Machines category and part of the Universal Milling Machines group, exemplifies KNUTH's commitment to precision engineering. This robust universal milling machine boasts a rigid HT-200 cast-iron construction, providing a solid base for precision work. It features a large milling table with a 1,300 mm travel on the X-axis, allowing for efficient handling of substantial workpieces. The machine is equipped with a universal cutter head that swivels on two planes and a horizontal spindle with its own drive, enhancing versatility. Its innovative design minimizes downtime through rapid positioning and feeds, ensuring increased productivity. With a user-friendly control panel and extensive standard equipment—including a coolant system and chip tray—this milling machine is engineered for both ease of operation and maintenance. For greater capacity and accuracy in your machining tasks, request a quote for the UWF 6 today, and experience the advanced capabilities of our Universal Milling Machines. Kfjdpfx Aeu E Nwboffea

Condition: new, The VHF 1.1 is a compact and versatile Conventional Vertical Milling Machine in the Universal Milling Machines category, designed by KNUTH. This universal milling machine boasts a robust frame made of vibration-dampening cast iron, ensuring stability during operations. Equipped with a horizontal spindle and a swiveling vertical milling head, the VHF 1.1 allows for infinitely variable spindle speed and feed on the X-axis, making it ideal for diverse applications in training departments, repair shops, and model-making workshops. Its 1.000 x 240 mm setup area and 535 mm travel on the X-axis facilitate various machining tasks, while the included coolant system and chip tray enhance functionality and cleanliness. Users benefit from the extensive standard equipment, which includes a 3-axis position indicator, drill chuck, reducing sleeves, and more. With its precise and powerful performance, the VHF 1.1 is an outstanding choice for anyone in need of a reliable milling machine. Don’t hesitate to request a quote and elevate your milling capabilities today! Kodpfx Afeuyh Egsfofa

Condition: new, The UWF 3.2, a robust Universal Milling Machine in the category of Conventional Vertical Milling Machines, enhances the acclaimed UWF 3 with its advanced specifications. This versatile machine features a high-strength HT-200 cast-iron bed for exceptional rigidity and stability under heavy loads. It offers a generous setup area of 1,370 x 320 mm, while its precision-ground guideways ensure long-term accuracy and minimal wear. Operators can enjoy the flexibility of an infinitely variable servomotor feed across all three axes. Additionally, the universal cutter head swivels on two planes, enabling a swift transition from horizontal to vertical machining. Included are essential tools and features like a powerful coolant system and a chip tray to streamline your workflow. Whether in a repair workshop or for training applications, the UWF 3.2 stands out for its performance and reliability. To discover how this Universal Milling Machine can meet your production needs, request a quote today. Kodsuyh Alepfx Affofa

Condition: new, The Mark Super SV, part of the Conventional Vertical Milling Machines category, excels as a mill drill with robust capabilities. This versatile machine is perfect for a wide array of applications, including drilling and milling of steel and non-ferrous metals. With its motorized cutter head movement and hand-wheel for precise positioning, the Mark Super SV ensures that you can achieve accurate results every time. It features an infinitely variable feed on the X-axis, coupled with an automated depth display, making it ideal for both single-piece machining and small series production. The digital display provides critical information like spindle speed, enhancing operational efficiency and reducing error rates. Standard equipment includes a 3-axis position indicator and a 13 mm drill chuck, ensuring that you have everything needed for high productivity. After 15 years, the Mark Super SV remains a top choice for workshops and training departments. Request a quote today to explore the capabilities of this reliable mill drill in the Milling Machines category. Kfjdpfx Asqcuc Ejffea