Used Vertical Boring Machine for sale (84,825)

Year of construction: 2024, condition: good (used), Foam Cutting Machine Hyma NSL Manufacturer: Hyma (Denmark) Model: NSL Condition: Almost like new / exhibition machine quality Year of manufacture: 2024 Machine dimensions: Cutting height: 1300 mm Cutting length: 2470 mm Left table (from blade): 2000 mm Right table (from blade): 1250 mm Side stop height: 900 mm Additional Equipment according to Hyma = AA AA6 adjustable angle side stop, 0-90 degrees AA9 upgraded drive motor, 2.2 kW AA11 electric grinding device with dust extraction (motorized and friction drive possible) AA7 extra smooth table top for stenciling Standard Equipment - Ratchet for serial cutting Kfodpfx Asx Iwp Eeffsa - Motorized height-adjustable blade guide - 4-rail roller table system - Safety protection screen The machine is connected and can be tested onsite. Machine location: Darmstadt Offered only due to internal restructuring. NO LACK OF SPACE; NO DISTRESSED SALE! _____ Our general terms and conditions apply. The seller does not assume liability for typographical or data transmission errors. All descriptions and images were provided by the owner and released for publication. The visual appearance of the items corresponds to their age and the enclosed images. The technical condition and wear of the items offered correspond to their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: used, Year of construction: 1983, max. wheel diameter 1800 mm gear width 000 mm max. module 18 axial slide travel 1000 mm distance - table - arm of counterstay 1800 / 1467 mm milling spindle - taper SK 55 diameter of hob 300 mm width of hob 375 mm axis distance between spindles 100 - 1060 mm milling slide swivelling 240 Grad table diameter 1200 mm table hole 300 mm taper MK 6 min. number of teeth 9 turning speed - milling spindle 20 - 150 U/min feeds axial 1 - 1000 mm/min radial feed 1 - 300 mm/min tangential feed 1 - 225 mm/min electrics - voltage/frequency 380 / 50 V/Hz control Sinumerik 3 M total power requirement 69 kW Kjdpfxov Saw Ij Affsfa weight of the machine ca. 26,5 t dimensions of the machine ca. 8,0 x 4,0 x 5,6 m Suitable for straight and helical gears, cylindrical gears and worm gears. profile milling attachment turning speed programme electronic handwheel

Condition: ready for operation (used), Year of construction: 2008, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Omal-dealer in Finland. Omal drilling and dowel insertion machine Kfedpfx Ajvn Rf Ueffsa CNC controlled machine designed to flexibly and efficiently bore, glue and dowel panel and solid wood pieces. Tehcnical specifications: 12 mm drill and dowel inserting Working field 700 mm Two independent working fields controlled with foot pedal Pneumatical reference stops Glue pump

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, CNC Horizontal Boring & Milling Machine - Ram Type Pama Speedram 3000 Year 2011 Siemens 840Dsl Boring spindle diameter 200 mm X 20000 mm Y 5500mm Z 1200 mm W 1400 mm Kfedpfx Aoww Awysffoa NC Rotary traversing table Pama TH 100 Table size 5000 x 5000 mm Table load max. 100 t B-Axis 0.001° V-Axis 2500mm Spindle taper ISO 60 / ISO 50 Spindle motor rating 100 KW Spindle speeds up to 2000 rpm 80 station Tool magazine and Automatic Tool changer 5 station head magazine + head changer via Pick-up CNC Universal indexing head CNC Indexing right angle head Head changer Internal coolant through spindle Proposal Number V(B)-6929

Condition: good (used), Year of construction: 2014, functionality: fully functional, ✅ Brand: FERMAT ✅ Type: CNC Boring Machine ✅ Model: WFT 13 R CNC Kodpfxswl Er No Affjfa ✅ X Travel: 2000 mm ✅ Y Travel: 2000 mm ✅ Year: 2014

Condition: used, Year of construction: 1970, max. ram stroke 250 mm throat 250 mm table diameter 350 mm long. travel of table 200 mm cross travel of table 500 mm distance table - lower edge of ram 300 mm double strokes/min. 15 - 160 /min total power requirement 1,7 kW Kfedpfxsxu Nq Ss Affoa weight of the machine ca. 1,7 t

Condition: used, Year of construction: 2003, Technical details: max. wheel diameter: 80 mm max. module: 3 total power requirement: 25-35 kW Kodpfx Afewwlunefefa weight of the machine ca.: 10 t workpiece weight: 15 kg workpiece length - max.: -50....+450 mm table diameter: 145 mm diameter of hob: 90 mm cutter length max.: 220 mm hob turning speeds: 1.000 U/min

Condition: used, Year of construction: 2007, turning diameter 600 mm swing diameter 680 mm turning height 600 mm z-axis 500 mm Kfodpjv Rrq Dofx Affoa x-axis 560 mm drive of main spindle 65/80 kW main spindle speeds: 2800 workpiece tool changer 12 Plätze feeds z-axis 0,01-30.000 mm/min feeds x-axis 0,01-45.000 mm/min chuck Rota NCR 630 mm voltage 400 V frequency 50 Hz control Siemens 840 D pl total power requirement 140 A weight of the machine ca. 18 t dimensions of the machine ca. 6,5 x 3,8 x 4,20 m

Condition: new, The Servomill® UWF 900, a top-tier model in the Conventional Vertical Milling Machines category, exemplifies the advanced engineering of KNUTH. This versatile machine integrates servo-conventional feed technology with a swiveling cutter head, offering remarkable functionality for various milling applications, including tool making and manufacturing. With an expansive work area of 1,235 x 460 mm and a travel range of 900 mm on the X-axis, the UWF 900 combines user-friendly operation with precise performance. The robust design features preloaded ball screws on all axes and high-quality servo motors that facilitate infinitely variable feed speeds, significantly enhancing productivity. Users can effortlessly execute complex tasks with the aid of electronic hand-wheels and joystick controls. Additionally, the machine is equipped with a range of standard accessories, including an automatic lubrication system and LED work lights. Offering high reliability and a long service life, the Servomill UWF 900 is a powerful choice for modern machining requirements. For a detailed quote or to obtain this exceptional milling machine, please request a quote today, and experience the precision and robustness of the UWF series in your own operations. Kfodsuy Id Aepfx Affja

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 7/61, Manufacturing origin Swiss Voltage 380/50/3 Netweight abt. 760 kg Dimensions abt. 1250x1000x1700 mm TECHNICAL DATA WORK CAPACITY Travel X and Y 200x200 mm Vertical slide travel 250 mm Travel of drilling spindle 70 mm Max free passage between table and spindle nose 330 mm Free passage between column and centre of spindle 260 mm Max drilling capacity (steel) 10 mm Max reaming capacity 50 mm TABLE Usable surface 400x300 mm Admitted load 100 kg Travels X and Y through motors Kjdsd Amgkjpfx Affjfa Number of T-slots 6 (longitudinal) DRILLING HEAD Spindel morse taper 0 Speed of spindle 150-3000 rpm Feed of drilling spindle 0,015 mm/t PRECISION Direct reading on divided drums 0,01 mm Direct reading on verniers 0,001 mm Guaranteed precision on displacement of slide-way 0,002 mm MEASURE Measuring system direct, optical Elements of measure graduated rule, div.1mm Read-out projection screens Shifting of zero-point yes Direct read-out 0,001 mm Guaranteed positioning precision 0,002 mm Installed power 1,2 kW errors and omissions excepted data given without obligation Inventory Nr.2160006, machine equipped with : 1 turning table Ø 220 with optical measure 1 centering microscope with 3-points suspension, zoom 40x, lightening 1 centering device with dial comparator cap. 3 mm. MT0 1 centering point MT0 1 tracing tool with spring-mounted point MT0 1 center punch MT0 1 chuck for centering drills MT0 1 self clamping drill-chuck 0-5 mm., MT0 1 boring head type 0, cap. 0.5-30 mm., MT0 1 levelling foot with 2 round levelling supports

Condition: excellent (used), Double-side working machine, which can be placed in line after a through-feed Multi Borer for the automatic processing cycle of boring and dowels inserting Kjdpfxsdi R R Re Affjfa Electronic Programmer RT 486 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Dowels inserting nozzles (and Glue Injectors) No. 6 Left-side + No. 6 Right-side Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) Bottom vertical units/supports (N°) 4 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Total installed power (Kw) 11,5

Condition: new, The Servomill® UWF 1400 is a premier model in the category of Conventional Vertical Milling Machines, showcasing state-of-the-art servo-conventional feed technology. This versatile milling machine features a large work area, driven by powerful spindle motors capable of operating with exceptional precision. Its robust design incorporates a swiveling cutter head that can rotate on two axes, allowing for a wide range of machining tasks without the need for complex programming. Notable features include preloaded ball screws on all axes, enabling jolt-free positioning and minimal wear—ensuring a long service life. Integrated electronic controls enhance user experience, providing intuitive operation through electronic hand-wheels and joystick technology. The Servomill® UWF 1400 is suitable for various applications, including tool making and manufacturing, with an extensive list of standard equipment, such as a powerful coolant system, LED work lights, and automatic lubrication. Experience the benefits of modern CNC technology in a conventional setting with KNUTH's Servomill® UWF 1400. To elevate your machining capabilities, request a quote today and explore our range of Conventional Vertical Milling Machines. Ksdpfxouy Ia De Affefa

Condition: refurbished (used), Numerical Control Type Power Control Professional Software woodWOP / TopDrill BST No. 2 Through-feed motorized conveyoring belts (4 x Kw ?) No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) Kfjdjdz Uk Topfx Affsa No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the bottom vertical supports No. 2 Top vertical units/supports (with Digital quota/axes display) No. 2 Drilling heads/blocks for each top vertical unit (2 x Kw 1,5) Miscellanous Spindles for each drilling head of the top vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 36

Condition: excellent (used), Horizontal units/supports (No.) 1 (adjustable 0° - 180°) Drilling heads/Blocks for each horizontal unit (No.) 1 Kfjdpohgbhcjfx Affsa Spindles for each horizontal drilling head (No.) 29 Max. working width (mm) 1000 (ca.) Vertical top pressure clamps (No.) 3 Total installed power (Kw) 3 (ca.)

Condition: excellent (used), Gantry (Portal) machine Movable panel (workpiece), movable working head (Horizontal position of the panel/workpiece) Numerical Control Power Control, Software WoodWOP Safety cabin (enclosure) of the working head and integral safety cabin (enclosure) of the machine In-feeding working table (panel support). Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized belts - Feeding speed (m/min) max 130 ca. Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 15 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Motorized carpet to evacuate chips and wastes. Separate electric and command cabinet Total installed power: Kw 99 N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR X-Y-Z ): Kfedpfogwbbqex Affsa N° 4 Drilling heads (4 x Kw 2.3) with No. 10 vertical spindles each (total top spindles No. 40) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR X-Y-Z ) : N° 6 Drilling heads (6 x Kw 2.3) with No. 40 vertical spindles each (total bottom spindles No 240) N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side) N° 8 Dowel Inserting nozzle & glue injectors(Right side) + N° 8 Dowel Inserting nozzle (Left Side) N° 2 Storage tanks for automatic feeding of the dowels OPTIONAL: WIRELESS BAR CODE SCANNER

Condition: excellent (used), Numerical Control Type NC 400 (Software) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Kfsdpfx Ajgk T Tteffsa Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 48 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), Electronic programmer RT 483 No. 2 Through- feed motorized conveyoring belts Feeding speed (55 m/min ca.) No. 2 Horizontal units/supports No. 1 Drilling heads for each horizontal unit/support (1 x HP 1,5) No. 20 Spindles for each horizontal drilling head Kjdpfx Ajfz Nanjffjfa Max. working width (mm) 3200 Min. working width (mm) 220 No. 7 Bottom vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Top vertical units/supports No. 2 Drilling heads/blocks for each bottom vertical unit (2 x HP 1,8) No. 4 Vertical top pressure clamps No. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display Total power installed (Kw) 35,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), Electronic programmer NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 6 Kfsdpfjlwqrtox Affsa Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 27.7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 Kfsdpfxerm Ik Ts Affoa No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 3 Transport belts to evacute chips (wastes) (N°) 2 Total installed power (Kw) The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) Kfedpfx Aex Aqi Ejffea In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: excellent (used), Electronic Programmer NC 400 Software Biesse Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Kodpfx Aed Nuwisffsfa Dowels inserting nozzles (and Glue Injectors) N. 5+5 Max. working width (mm) 3200 Min. working width (mm) 235 Bottom vertical units/supports (N°) 6 Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 Vertical top pressure clamps (N°) 2 Motorized endless screws to evacuate wastes/chips (N°) 2 Motorized carpet to evacuate chips and wastes The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Kodpfeidqd Tsx Affjfa Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Splindles for each horizontal drilling head (N°) 11 Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 6 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Kfedoidqf Ropfx Affoa No. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Transport belt to evacute chips (wastes) Digital quota (axes) display Total installed power (Kw) 59,1 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts

Condition: excellent (used), Numerical Control Type Power Control Software TOPDRILL BST 500 No. 2 Through-feed motorized conveyoring belts No. 2 Horizontal units/supports (with Digital quota/axes display) No. 1 Drilling head for each horizontal unit (1 x Kw 1,5) No. 21 Splindles for each horizontal drilling head Max. working width (mm) 2500 Min. working width (mm) 250 No. 4 Bottom vertical units/supports (with Digital quota/axes display) Ksdpfx Aoivawpjffefa No. 2 Drilling heads/blocks for each bottom vertical unit (2 x Kw 1,5) N. 11 Spindles for each drilling head of the bottom vertical supports No. 4 Vertical top pressure clamps Motorized carpet to evacuate chips and wastes Total installed power (Kw) 20

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. N. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 x HP 1,8 Max. working width (mm) 3200 - Min. working width (mm) 215 N. 7 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 3 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 5 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units Ksdpfx Ajhvi Dujffjfa The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles