Vertical cnc machining center

HURCO VMX64

Condition: used, Year of construction: 2016, controller manufacturer: Hurco, controller model: MAX5, _____ Description: Year of manuf. : 2016 Control : Hurco MAX5 Speed : 12000 rpm Movement X/Y/Z : 1625/864/762 mm Iaodpfx Ahexpb Swj Nol Spindle: Technology:Belt-driven spindle Speed:12.000 rpm Power (max.):18 kW Torque (max.):239 Nm Taper:SK40 Workingtable: Clamping surface:1.676 x 889 mm Tableloading (max.):2.722 kg In general: Toolmagazine:40 Stations Rapid travers in X/Y/Z:18/18/13,5 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internaal cooling unit with filter and High-pressure, 20 bar Workpiecemeasurement:Touchprobe, Renishaw OMP 60 Toolmeasurement:Probe, Renishaw TS27R Setup operations:Electronic handwheel Furhter Equipment:Chiller, Trafo Further Accessory:Misc. toolholder

Condition: used, Year of construction: 2007, turning diameter 42 / 140 mm turning length 170 mm control Mitsubishi Meldas turning speeds 80-8.000 U/min c-axis 0,001° turret (x-stations) 2x 12 (VDI 20) angetrieben turning speeds 45-4.500 U/min spindle 1 kW Iasdpfjvyli Esx Ah Nel gripping station 42 mm turning speeds 60-6.000 U/min c-axis 0,001° number of controlled axis 8 collet unit 48 DIN 6343 . Number of working hours 10769 h chip conveyor ja/yes Bj. 2018 total power requirement 7,5 / 11 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 2,4 x 1,6 x 2,2 m CNC turning and milling machine CITIZEN BOLEY BE 42, year 2007 Simultaneous working with 7 axes on main and pick-up spindle very good condition, operating hours 21.999h (September 2024) Accessories: # Various tool holders: 5x axiale driven tool holder # collet chuck for collets type 173E # additional coolant cooler # Knoll chip conveyor, year of construction 2018 The Boley BE 42 is without barloader. Loading magazine interface has been fitted. Complete battery exchange on 22.12.2025

Condition: good (used), Year of construction: 2003, operating hours: 1 h, functionality: fully functional, machine/vehicle number: M644-06204013CFA, Hurco VMX 64 / 40t With Knoll coolant system Iajdox R Sunjpfx Ah Nel Internal coolant supply (IK)

Condition: excellent (used), Year of construction: 2003, travel distance X-axis: 1,625 mm, travel distance Y-axis: 860 mm, travel distance Z-axis: 760 mm, spindle speed (max.): 8,000 rpm, Ultimax 4 control unit Travel X/Y/Z: 1625/860/760 mm Speed 8000 min-1 Iaodpfx Ahjra Idho Nel Tool magazine for 40 tools, SK 40 IKZ Chip conveyor

Condition: good (used), Robot Manfacturer: Staeubli Type: RX170 Iasdsbrhtdspfx Ah Nol

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,625 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 790 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, Technical details: x-travel: 1625 mm y-travel: 880 mm z-travel: 790 mm table surface area: 1675 x 890 mm table load: 2000 kg turning speeds: 12000 1/min tool taper: SK 40 control: ULTIMAX 4 tool change unit: 40 Pos. distance spindle /table: 150 - 910 mm spindle: 15 kVA total power requirement: 38 kVA weight of the machine ca.: 15,5 t dimensions of the machine ca.: 4,9 x 3,8 x 2,75 m 3-axis universal machining center, chipconveyor, internal coolant device 20 bar, coolant tank 600 liter incl. paper filter, Iaodpsxbrrfofx Ah Nol el. handwheel, USB interface, LAN, DXF software, Hours "machine on" approx. ? h *

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Ijdpfsw Dfhzox Ah Noal

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Iaedpswrfamofx Ah Nel

Condition: ready for operation (used), Year of construction: 2005, operating hours: 52,455 h, functionality: fully functional, machine/vehicle number: 2501-0154, turning length: 600 mm, turning diameter over cross slide: 140 mm, turning diameter: 300 mm, spindle motor power: 25,000 W, spindle speed (min.): 5,000 rpm, spindle speed (max.): 5,000 rpm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 3 m/min, rapid traverse Y-axis: 3 m/min, rapid traverse Z-axis: 3 m/min, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, torque: 239 Nm, bar passage: 80 mm, feed rate X-axis: 165 m/min, feed rate Y-axis: 165 m/min, feed rate Z-axis: 220 m/min, overall weight: 10,500 kg, Equipment: documentation/manual, Machine is still in use and can be seen working at VOVU Machining in Uden. In total there are 6 identical machines here. Fanuc 310is controller Iodour Hfzjpfx Ah Neal

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis Iaodpfx Asurw Uysh Nel - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment