Used Vertical Cnc Milling Machine for sale (66,274)

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Dsdpfovt D D Uex Aa Eocd Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle Dcsdpfx Aoquhbgja Ejd

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Dcsdpjw Ed U Njfx Aa Ejd Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Dcjdpew Nklhjfx Aa Eod Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: excellent (used), functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 550 mm, feed length Z-axis: 550 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, HERMLE UWF 1001 CNC milling machine With CNC control, HEIDENHAIN / Type: TNC 155 Measuring probe / Coolant system / Chip conveyor Enclosure / Cabin / Control cabinet: 1260 x 500 x 1700 mm Travel paths: 700 x 550 x 550 mm / Clamping table area: 1000 x 490 mm Dcsdjyk Ux Uspfx Aa Ejd

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Dedpetrhq Hjfx Aa Escd Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 1991, CNC Vertical Milling Machine RAMBAUDI type RAMMATIC 600 Travel X 1260 mm Travel Y 690 mm Travel Z 600 mm Numerical Command NUM 1060 Cone SA 50 Table size 2000 x 600 mm Year of construction 1991 Voltage 380 V Dedpfx Aoxxlr Tja Escd Depth 2500 mm Total height 4000 mm Weight: approx 9 T

Condition: not inspected (used), JAFO FYN 50 NB – CNC Vertical Milling Machine For sale is a CNC vertical milling machine from JAFO, model FYN 50 NB, year of manufacture 1988. The machine is fully operational and ideal for precise milling operations on workpieces up to 700 kg including clamping device. ⸻ Technical Data • Travel (X/Y/Z): 800 × 500 × 500 mm • Table working area: 500 × 1,400 mm • Number of T-slots: 7 • Slot width: 18 mm • Slot pitch: 63 mm • Max. longitudinal table travel: 800 mm • Max. vertical knee travel: 500 mm • Max. transverse spindle head travel: 500 mm • Feed rate: stepless 0–4,000 mm/min • Spindle taper: ISO 50 • Head swivel angle: ±45° • Distance spindle axis to vertical guides: max. 590/90 mm • Spindle speed: 56–1,800 rpm • Rapid traverse: 4,000 mm/min • Spindle drive motor power: 5.5 kW • Operating voltage: 380 V, control voltage 24 V • Total power consumption: 10 kW • Dimensions (L×W×H): 2,080 × 1,700 × 2,260 mm • Total weight incl. hydraulic unit: 4.5 t ⸻ Equipment & Features • Vertical, swivelling milling spindle on a transversely adjustable ram • Hydromechanical tool clamping system • Separate feed drives with DC motors and permanent magnets • Power transmission via toothed belt to preloaded ball screws • Automatic lubrication system for spindle drive and guideways • Hydraulic counterweight for the knee • Manual adjustment via electronic handwheel • Heidenhain control at the swivelling control panel, control cabinet mounted on the machine base • Documentation and operating manual included • Additional images and videos available upon request ⸻ The machine is immediately ready for operation. • Inspection possible at any time • Europe-wide transport available ⸻ Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to modifications and errors. Dcodpfx Aoxk Tzgoa Eod

Condition: new, Year of construction: 2022, CNC vertical machine VOC-1000 BASIC TECHNICAL DATA: - X-/Y-/Z-axis travel: 1040 / 580 / 620 mm - spindle 12.000 rpm; BT-40 - work table 1120x560 mm; load capacity 750 kg - spindle - table distance 125-745 mm - distance spindle axis pillar 666 mm - working strokes up to 10 m/min - fast strokes 36/36/30 m/min - positioning +-0.008 mm; repeatability +-0.005 mm - Machine dimensions (W x D x H) 2671 x 2800 x 2760 mm - machine weight 7000 kg STANDARD MACHINE EQUIPMENT: - FANUC 0I-MF Plus controller (5); 10.4˝ LCD display - Fanuc Beta 11/15 kW spindle motor - Fanuc Beta 1.8/1.8/3.0 kW mid-axis motors - AICC program reading 40 blocks in advance - MPG lever - spindle oil cooler - Air blow gun and emulsion flushing gun - chip conveyor (screw) with container - 24-place A.T.C. tool magazine - PMI ball guides on all axes - blow-out through spindle at tool change - chip flushing system - heat exchanger in electrical cabinet - automatic lubrication system - Signal light & LED work light - Fully protected working area with cab - tool cassette - levelling screws and shims - CE norms Dedeiwtnajpfx Aa Escd MACHINE ACCESSORIES: - 20 bar spindle cooling with additional 600l tank (5.000 EUR + VAT)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Dcsdpfeyahv Ssx Aa Eod Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTC530, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Dodpfeymz D Njx Aa Escd Travel X-axis: 2 x 750 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Rapid traverse X / Y direction: 25 m/min Rapid traverse Z direction: 20 m/min Feed force: 9 kN Spindle speed range: 30-12,000 rpm Tool changer: 22-position Tool holder: SK40 Maximum tool length: 400 mm Maximum tool diameter: 85 mm (135 mm with adjacent stations empty) Tool change time: 4.0 s Clamping area: 2 x 1,350 mm x 500 mm Maximum table load per table: 550 kg MACHINE DETAILS Control model: Heidenhain iTC530 Drive power: 30/20 kW Total power requirement: 55 kVA Dimensions & Weight Dimensions (L x W x H): 6.0 x 3.5 x 3.5 m Machine weight: 10,000 kg EQUIPMENT Internal cooling Coolant system with paper band filter Documentation

Condition: ready for operation (used), Year of construction: 2004, operating hours: 42,832 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, controller model: FANUC SERIES 18i MB, clearance between the columns: 2,300 mm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 2,100 mm Travel Z-axis: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Maximum table load: 10,000 kg Spindle taper: ISO-50 Standard spindle speed: 6,000 rpm Max. tool diameter / with empty magazine slot: 127 mm / 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Tool changer capacity: 32 tools Rapid traverse (X-axis): 20,000 mm/min Rapid traverse (Y-axis): 15,000 mm/min Rapid traverse (Z-axis): 15,000 mm/min Feed rate: approx. 1 – 10,000 mm/min Dsdpfxoymxi Ao Aa Eocd MACHINE DETAILS CNC control: FANUC SERIES 18i MB Spindle motor power (continuous / 30 min): approx. 22 / 26 kW Operating hours, feed time: 42,832 h Operating hours, automatic mode: 53,246 h EQUIPMENT Automatic head changer (with angular milling head) RENISHAW probe

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, controller model: PHILIPS, jaw width: 125 mm, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Bids are binding and require timely collection between 08.04.26 and 16.04.26! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 400 mm Travel Z-axis: 300 mm Table dimensions: 550 x 280 mm Jaw width: 125 mm Dcjdpfoyk Thuex Aa Eed Tool holder: SK 40 MACHINE DETAILS Control: PHILIPS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 50 A Dimensions & weight L x W x H: 3000 x 2000 x 1800 mm Machine weight: 1500 kg EQUIPMENT Table with 4 T-slots Fitted vice Documentation

Condition: ready for operation (used), Year of construction: 2009, Used CNC vertical machining center Djdpfxoycplmo Aa Escd

Condition: ready for operation (used), total height: 3,600 mm, empty load weight: 22,000 kg, Schiess Ø 2070 x H 1330 mm Chuck dia.: Ø 1700 mm Max turningdia -- passage: Ø 2070 mm - H 1330 mm Power on the spindle: 30 kW Max hight of workpiece Z-axis: 1330 mm (Z: 1000mm) Dcsdpfx Aasyru E Dj Eed Number of speeds: 1.7 -> 53 rpm

Condition: good (used), Year of construction: 1972, functionality: fully functional, overall weight: 1,200 kg, x-travel: 290 mm y-travel: 170 mm z-travel: 310 mm Millung spindle number of milling spindle turning speeds: 16 milling spindle turning speeds: 40 - 2000 U/min inner taper of milling spindle: ISO 40 max. diameter of the vice bore: 25 Vertical milling head inner taper of milling spindle: ISO 40 spindle turning speed range: 50 - 2.500 U/min max. diameter of the vice bore: 25 Dcjdpfoyrrwqjx Aa Eod dimensions: 1.100 x 1.100 x 1.660 mm

Condition: good (used), Year of construction: 1990, 1 used well preserved CNC controlled tool milling machine as travelling column version with CNC path control GRUNDIG Dialog 11 table size 1600 x 675 mm tool holder SK / ISO 40 traverse X-axis, longitudinal 1200 mm Y-axis, cross 600 mm Z-axis, vertical 500 mm table load 2000 kg speed range 20 - 6300 rpm feed range, stepless 2 - 10.000 mm/min rapid traverse in all axes 10 m/min quill stroke 80 mm Drive power 100 % ED 7.5 kW 40 % ED 12 kW Machine dimensions L x W x H 3600 x 3000 x 2300 mm Machine weight 6800 kg Control cabinet dimensions L x W x H 1700 x 900 x 1750 mm Switch cabinet weight 470 kg Accessories / Special features: - CNC tool milling machine suitable for tool, jig and fixture making, training as well as mold making. - CNC path control GRUNDIG Dialog 11 - Screen graphics, dialog guided input, 3 D linear interpolation, circular interpolation, helical interpolation, polar coordinate input, numerous drilling and milling cycles, cycle input graphically supported, milling cycles "contour pocket" for automatic free milling of irregular pockets also with islands, shift and rotation of the coordinate system - Electronic handwheel - Interface RS 232 Dcodpjhhuf Hsfx Aa Eed - Swiveling vertical milling head +/- 90 - Hydraulic tool clamping, DIN 2080 with clamping groove, Ott system - Spindle sleeve adjustment 80 mm - Horizontal milling device - Full protection cabin - Ball screw spindles in all 3-axes - Coolant system - Bele

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Dodpfx Aaexcgtgo Ejcd Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: Dsdpfx Aehqhlvsa Eecd -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: used, Year of construction: 2017, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 20.000 U/min tool taper HSK-A63 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Dcsdpfeypwbijx Aa Esd Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Dedpoypwbcjfx Aa Eocd Control Siemens 828D table dimensions 1.050 x 700 mm spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: new, Year of construction: 2026, 0550 mm 410 mm 480 mm 650x410 mm BBT 40 10.000 U/min Djdpex Urt Ejfx Aa Eecd Motor Capacity 7,5/11 kW max. table load 500 kg

Condition: new, Year of construction: 2026, 1100 mm 650 mm 610 mm 1200x6000 mm BBT 40 12.000 U/min Dcedpfox Urtxex Aa Eod Motor Capacity 7,5/11 kW max. table load 1300 kg

Condition: ready for operation (used), Schiess 32 DZ Type: 32DZ 300/350-325/160 De Schiess DZ-tafeldraaibank met twee staanders is geschikt voor alle soorten draaiwerk. Tafeldiameter: 3000 mm Maximale belasting: 44 ton Snelheid: 1 100 tpm Maximaal overdraagbaar koppel op de tafel: 10.000 kpm Snijkracht op de wagen: 5000 kp Vermogen: 75 kW CNC-besturing: BOSCH (Kogelomloopspindel) Dcodsv Sfnxepfx Aa Eod Heidenhain lineaire schaal Horizontale verplaatsing van de gereedschapshouder vanaf het midden van de tafel: 2510 mm Verticale verplaatsing van de dwarsbalk: 1600 mm Verticale slag van de gereedschapshouder: 1600 mm Gereedschapshouder kan 30° naar links en rechts kantelen Maximale hoogte van het werkstuk: 3420 mm Maximale diameter van het werkstuk: 4020 mm Gereedschapswisselaar met 12 gereedschapsposities

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 220,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Dsdpfxowaiuqo Aa Ejcd Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)