Used Vertical Boring Machine for sale (65,792)

Condition: new, Year of construction: 2019, functionality: fully functional, Stock machine, new Control: Fanuc 0i-M with Manual Guide Hyundai Wia Fanuc Series Main drive: 18.5/11 kW - 117.7 Nm Spindle speed range: 12,000 rpm Number of axes: 3 Travel distances X-axis: 1,060 mm Y-axis: 510 mm Z-axis: 635 mm Rapid traverse: X/Y 36 m/min, Z 30 m/min Table: 1200x500 mm Dsdpeyf Nkzsfx Ac Nscc Table load capacity: 800 kg Tool stations: 30 Tool holder: BBT40 Coolant through spindle: 20 bar Hinged belt chip conveyor / left side Further details can be found in the attached brochure. Machine is available immediately. We would be happy to arrange an inspection appointment in Idstein.

Condition: excellent (used), Year of construction: 2017, DMG MORI DMC 1150 V Vertical Machining Center CNC: Siemens CELOS SMARTkey operating mode selector Year: 2017 Continuously programmable spindle speed: 20–24,000 rpm Spindle motor power: 24 kW Spindle hours: 2,200 hrs Continuously programmable feed rate for X, Y, Z axes up to 42,000 mm/min Rapid traverse X, Y, Z: 42 m/min Dedpfsyf Im Ijx Ac Necc X-axis travel: 1,150 mm Y-axis travel: 700 mm Z-axis travel: 550 mm Table size: 1,460 × 750 mm Maximum table load: 1,500 kg Overall dimensions: 6,185 × 5,421 × 2,910 mm Transport dimensions: 3,733 × 2,855 × 2,710 mm Machine weight: 9,200 kg Accessories: - 60-position tool magazine - Chip conveyor - Blum tool probe - Heidenhain workpiece probe - 4th-axis rotary table Nikken BZA CNC Z180 - Mist separator - Chiller unit - Through-spindle coolant - Set of 63 HSK tool holders - Wash gun - Oil mist extractor - Complete documentation

Condition: excellent (used), GIC VFB4000 in immaculate condition. Was only used for a few weeks prior to the contract not going ahead. Can be supplied as a line with Multipond weigher (also only used for a few weeks) Dcedevtcqgspfx Ac Nsc

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 1100 mm y-travel 600 mm z-travel 510 mm total power requirement 30 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4400 x 2250 x 2920 mm Additional information Working area: X-axis travel: 1100 mm Y-axis travel: 600 mm Z-axis travel: 510 mm Dcjdpjyf E Ddofx Ac Nec Rapid traverse: 32 m/min Worktable: 1300 x 600 mm T-slots: 6, size 18, 100 mm spacing Max. table load: 1000 kg Distance from column to spindle center: 600 mm Spindle: 60 - 12000 rpm Drive power: 10/17 kW Spindle taper: ISO 40 / DIN 69871A Magazine: 32 positions Max. tool weight 8 kg Max. tool length 300 mm Max. tool diameter 76/127 mm Tool change time 2.5 sec Space requirements: Length x Width x Height 4400 x 2250 x 2920 mm Weight 8500 kg Equipment and accessories: Heidehain iTNC 530 CNC control Internal coolant system (IKZ): 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper 50 SK spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm Djdpfx Aceyf Ez Ae Nscc - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 1st. November 2024): - Control on: 60.818 h - Machine on: 59.598 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t Dcedsw Dugajpfx Ac Njc dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm It is a hydraulic machine. *

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Dedjwv Uhbepfx Ac Necc Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor *

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm Dcsdpfx Acew Rv Tao Nsc grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: new, Year of construction: 2026, functionality: fully functional, • Working range in X – Y – Z mm. 4,200 – 1,600 – 100 (available on request up to 6,000 x 2,200mm.) • Continuous work table • Lateral and bottom reference stops • Gantry machine with Gandry system – Double motorization • Milling unit with 4-axis electrospindle, HSD brand Dcsdpfswta Ibsx Ac Njc • Blade unit for 360° cutting via HSD electrospindle • Air cooling • ISO 30 attachment • Inverter • 10-position tool magazine • Control system: OSAI • Software • Easy programming • Importing files • Remote control panel/console • Teleservice and video diagnosis: real-time solution • Automatic lubrication of the guides • Side bands to protect the unit • Machine documentation: use and maintenance manual, software manual, spare parts catalogue, wiring diagram, CE declaration of conformity.

Condition: excellent (used), functionality: fully functional, number of spindles: 35 pneumatic head inclination Dcedpfx Acow U Aiie Njc

Condition: excellent (used), Year of construction: 2014, mega Design Solutions UK LTD Use and recommend Haas machines. HAAS TM3P 3AXIS MACHINING CENTER LARGE CAPACITY Outstanding condition very little used complete with 8 BT40 tools as shown Dodpfx Asyhhgmsc Necc Good tooling package Travels X 1016MM Y 508MM Z 406 MM We can help with setup and training if required.

Condition: ready for operation (used), Year of construction: 2000, A CNC vertical machining center Fadal with increased torque is available. Travel X/Y/Z: 1140mm/635mm/61mm, table dimensions X/Y: 1350mm/635mm, rapid traverse X/Y: 25m/min, rapid traverse Z: 17m/min, max. feed rate: 15m/min, positioning accuracy: +/-0.004mm, repeatability: +/-0.0015mm, spindle speed: 10000rpm, tool interface: SK40, max. spindle torque: approx. 360Nm, tool stations: 24. Machine dimensions X/Y/Z: approx. 3300mm/2600mm/3050mm, weight: approx. 6000kg, control: Siemens. Documentation available. On site inspection is possible. Dcjdpfx Ajyhgpgsc Noc

Condition: excellent (used), Year of construction: 2013, DUGARD 1000Y PLUS HEIDENHAIN TNC 530i CONTROL TABLE SIZE 1200 X 600 AXIS TRAVELS 1000 MM X 610 MM X 510 MM 10,000 RPM SPINDLE BT 40 TAPER SPINDLE THROUGH SPINDLE COOLANT 24 ATC TOOL PROBING WITH PROBE YEAR 2013 Dcjdpfxeyhft Rs Ac Njc VERY GOOD CONDITION , SPINDLE GOOD , ALL AXIS MOVING ABOUT SMOOTHLY

Condition: used, Year of construction: 2013, Mori Seiki NVX5100-II/40 Vertical Machining Centre with MAPPS IV/M730BM Control, Travel X/Y/Z = 1050/530/510mm, Table Size 1350 x 600mm x 1200kgs, Spindle Taper BT40, 30 Position ATC, Max Spindle Speed 13,000rpm, High-Pressure Through Spindle Coolant, Swarf Conveyor, Qty of Spindle Tooling as Lotted, Machine Weight 7,000kgs, Floor Space (L x W x H) 3084 x 2851 x 2597mm. S/No. NV502130614 (2013) Dcedpfjyhdhgsx Ac Noc Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 1998, functionality: fully functional, We offer this used CNC vertical machining center CHIRON FZ 12 S, year of manufacture 1998, currently located in Spain. Immediately available. Dcodpfxsyhdhas Ac Noc Travel distances: X-axis: 550 mm, Y-axis: 300 mm, Z-axis: 425 mm – Control: SIEMENS SINUMERIK 840D/FM/NC – Table dimensions: 950 x 370 mm – incl. 4th-axis machining from Preiseler – Speed range: 20–10,000 rpm – incl. clamping devices mounted on the worktable – with operation manual.

Condition: used, Year of construction: 2013, operating hours: 7,283 h, functionality: fully functional, travel distance X-axis: 7,210 mm, travel distance Y-axis: 698 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 150 mm, rotational speed (min.): 20,000 rpm, overall weight: 3,870 kg, operating hours of spindle: 923 h, spindle motor power: 7,500 W, spindle mount: MK 1, number of spindles: 1, number of slots in tool magazine: 8, mount diameter: 31 mm, tool length: 150 mm, tool diameter: 150 mm, tool weight: 3,000 g, type of input current: AC, Equipment: rotational speed infinitely variable, We are selling a Mecal machining/milling machine that can be used to process, mill, and drill aluminium profiles. The machine was purchased from the company Pressta-Eisele. Dcsdpfx Aceyhdgpe Njc

Condition: not inspected (used), Year of construction: 2005, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, rotational speed (max.): 10,000 rpm, overall weight: 4,200 kg, table 900x350 mm travels 750x410x500 mm Dedsx Irxzopfx Ac Nocc spindle ISO 40 max speed 10,000 rpm weight 4,200 kg

Year of construction: 2003, condition: excellent (used), functionality: fully functional, vertical glass sandblasting machine working height : 1400 mm open top Dcjdpjyhcnrjfx Ac Njc number of guns : 5

Condition: good (used), Year of construction: 2012, Matec 30 L, year of manufacture 2012, Heidenhain iTNC 530 control, travel X/Y/Z 1300/600/700 mm, spindle speed up to 12,000 rpm, HSK 63 - A tool holder, electronic handwheel, ICS 20 bar, paper band filter, 80-tool magazine, full enclosure of working area, direct measuring systems, chip conveyor, bellows with steel laminations, 3D probe, laser measuring system. Dsdpfx Asyhcm Ujc Necc

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, x-travel 1000 mm y-travel 600 mm z-travel 600 mm Control: Heidenhain TNC 426 Spindle nose: 100–700 mm Work table: 1,080 x 580 mm Max. workpiece weight: 550 kg T-slots: 7 pcs. T-slot width: 14 mm Tool magazine with 36 positions Max. tool weight: 8 kg Max. tool length: 340 mm Machine weight approx. 6.2 t Dodpfxsyhciie Ac Nscc Space requirement approx. 4,790 x 5,330 x 2,905 mm

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm feed: 1 - 8000 mm/min table size: 2120 x 550 mm table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Dsdpfxoyhcd Ho Ac Necc Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Accessories: Chip conveyor

Condition: good (used), Year of construction: 2016, HURCO VM10i vertical machining center, 3-axis Year: 2016 MAX 5 control, 2 × 19" LCD color displays (text + graphics) TECHNICAL DETAILS X-axis travel: 660 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table 762 x 406 mm Table load max: 682 kg T-slots (DIN 650): 3 × 18 H8 × 100 mm Distance spindle nose – table: 102 – 610 mm Max. spindle speed: 12,000 rpm Spindle power: max. 11 kW Spindle torque: max. 61 Nm Tool holder: SK40 Rapid traverse X,Y,Z-axis: 24 m/min Tool magazin: 20 positions Tool diameter max: 89 mm Tool length max: 250 mm Dodpoyhb N Ijfx Ac Necc Tool weight max: 7 kg Weight: 3000 kg Accessories/options: - Cooling flood through spindle with ICS (20 bar) - High-pressure cooling flood system - Spindle cooler - Chip auger - Software options as per photos Under power in our warehouse!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,000,600 mm, Hartford Pro-1000 Vertical CNC 1000x600 Dsdpew Ih Hgjfx Ac Necc

Condition: good (used), Year of construction: 1992, operating hours: 30,000 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Okuma OSP5020M, total height: 2,700 mm, total length: 2,500 mm, total width: 2,500 mm, rotational speed (max.): 8,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 10,000 h, coolant supply: 5 bar, number of slots in tool magazine: 18, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, CNC Milling Machine Okuma VR40 Year of manufacture: approx. 1992 Dcedoyha R Repfx Ac Njc 3 axes, X = 560 mm, Y = 450 mm, Z = 450 mm travel. Spindle speed: 8,000 rpm, SK40 Spindle hours: approx. 10,000 h Coolant pump with approx. 5 bar coolant pressure Coolant with six nozzles around the spindle Tool magazine with 18 stations Various tool holders with assorted tools The machine originally operated in a sheltered workshop and has also only been used occasionally by us. It is in very good condition, and both the axes and the spindle run quietly and smoothly. Accuracy is very good. The machine is available for inspection and demonstration under power at our facility. It is sold with three machine vises and all accessories shown in the photos. Complete documentation is available. Two tool stations are defective as the plastic grippers are broken. They can be replaced with new grippers. Normally, the machine has 20 tool stations. This has never been an issue for us over the years.

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm Dcsdpfjwth Szsx Ac Nec z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!