Used Veneer Patcher for sale (511)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2250 mm Blsdpfx Akjv A Hlto Eeg Weight 7900 kg Total power requirement 54 kw

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Blodpev Sthgsfx Ak Esg Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Used machine Used veneer saw of the company Scheer type FM 2 - 3000 Clamping by handwheel Bedpfxewka Rdj Ak Eolg integrated suction unit Cutting length: 3000 mm movable Availability: short term Location: Röllbach

Condition: used, Used machine Used veneer splicing machine of the company Kuper type FW 1150 passage width: 1150 mm feed speed: approx. 10 - 30 m/min Blodowka Rkspfx Ak Esg Veneer thicknesses: 0.3 - 3 mm without tables in front and behind Availability: short term Location: Röllbach

Condition: used, Used machine Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Blodpfxswpm I Hs Ak Eeg Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Condition: used, Used machine Blsdpjw I Ul Aofx Ak Eeg Cutting length 3000 mm with handwheel clamping Availability: short term Storage location: Röllbach

Condition: used, Used machineCutting length 3000 mmwith handwheel clampingAvailability: short termStorage location: Solingen Blsdpow I Uhdsfx Ak Eeg

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Bjdpew Id S Sofx Ak Eelg Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, pressing force: 90 t, stroke length: 350 mm, number of cylinders: 6, cylinder diameter: 85 mm, TECHNICAL DETAILS Electric heating plates: 3,000 x 1,300 mm Number of heating plates: 2 pcs. Total pressing force: 90 t Cylinder stroke: 350 mm Number of levels: 1 pc. Level opening: 350 mm Press cylinders: 6 pcs. Diameter of press cylinders: 85 mm MACHINE DETAILS Working temperature: 90°C Max. temperature: 120°C Electrical data Operating voltage: 400 V/50 Hz Connected load: 22 kW Heating capacity: 22 kW Power requirement hydraulic unit: 3 kW EQUIPMENT Movement of the press table via rack-and-pinion and parallel guides Electronic control unit with touchscreen Digital timer for setting pressing time Digital input and monitoring of pressing pressure Digital diagnostics and fault message display Safety circuit with two-hand operation Safety pull-cord Safety support for lower press table Blodpfx Asxnyqpjk Eog EFC electronic flatness control Gold anodized heating plates (Busse) Note: Dismantling and loading can be offered for approx. €1,200 net.

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Bljdpfxjwmxmvj Ak Eeg Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: good (used), Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Blodpfx Aoxmhcdjk Ejg Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways Bodpfxoqzky Eo Ak Eelg The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: good (used), Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - Norme CE Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Bedpfx Akov Igtbs Eslg Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000

Condition: good (used), Code: 0583 Bedpfx Aed Im I Rok Eolg Brand: RAVNE Model: 3700 Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Thickness mm 12

Condition: good (used), cutting length (max.): 3,600 mm, overall weight: 4,000 kg, Cutting length (max.) 3600 mm Blsdpfewv Eiijx Ak Ejg

Condition: used, Year of construction: 2006, functionality: fully functional, For sale Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600! Tech. data Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Bedpfx Akeumlinj Eolg Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: used, Year of construction: 2013, functionality: fully functional, Fisher+Rueckle FZR-24 Veneer crossfeed splicing machine, year 2013 for sale! Veneer strip length 400-1100 double lane/ 350-2100 mm single lane Veneer strip width 50-500 mm Veneer strip thickness 0.3-1.5 mm Blodpfxoumrf Ae Ak Eog Max nominal output /machine cycles 30 cycles/min Average production speed 17-20 cycles/min Effective length of heating zone 2478 mm Connection power 22 kW Compressed air 6 bar Glue types PVAc or UREA based

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Blodpet Akcfofx Ak Esg Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: used, functionality: fully functional, Machines connected in one line (all four machines are only sold together): 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Bsdpfot A Nr Sex Ak Ejlg Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: ready for operation (used), Dryer for veneer with 4 levels. In-feed and out-feed system Bedpfsw Ib A Uex Ak Eelg with quality sorting and sorting pockets.

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Bledpfx Akomb U A Io Eeg Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Condition: ready for operation (used), Year of construction: 1994, Ott 2513 Stabil Veneer Press 4 cylinders Pressing area 2500 x 1300 mm Electric heating Electric opening and closing Bjdjx Dzvxepfx Ak Eslg Pressing force 90 tons Year of manufacture 1994 Price 7,500.-

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Very good condition. Available immediately. Bsdpjvxvc Hjfx Ak Eslg

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating Bjdpsw Aff Djfx Ak Ejlg 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening year 1992

Condition: ready for operation (used), plate length 3500mm plate width 1300mm two inserts water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm Bedpjrk Itnefx Ak Eslg span between plates max 460mm