Used Veneer Shears for sale (2,145)

Condition: used, Year of construction: 2007, - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 Veneer shear Manufacturer: Fischer & Rückle / Monguzzi Year of manufacture: 2007 Veneer shear with milling unit and gluing unit for butt joint gluing - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 Ljdpfozuzqqex Apmjaf - Length: 7 m - Width: 3 m - Height: 2 m Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Ledeqzky Espfx Apmeaf Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: excellent (used), Year of construction: 1994, Josting Veneer Pack Cutting Machine Type: EFS 2300 L - Year 1994 Cutting length: 2,300 mm Maximum insertion height: 80 mm FIESSLER safety light curtain Alignment light for cutting position display Parallel fence motorized adjustment, fine adjustment via handwheel Connected load: 7.7 kW Weight: 2,700 kg Dimensions: 3,610 x 1,700 x 1,680 mm Lsdpfsxgbwzex Apmeaf Ex-works: - available immediately -

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Laodpfxowmxmve Apmef Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Maximum thickness 45 mm Built in 1994 With spare blade Lasdpfx Aev Nzpmepmef

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13.707, working width: 6,200 mm, sheet thickness (max.): 6 mm, power: 11 kW (14.96 HP), overall weight: 17,500 kg, throat depth: 60 mm, TECHNICAL DETAILS Lodpozuwzrjfx Apmsaf Max. sheet thickness: 6 mm Max. working width: 6,200 mm Overhang: 60 mm Back gauge type: Electric Back gauge depth: 1,000 mm Angle adjustment: Motorized Sheet support system: Pneumatic MACHINE DETAILS Power: 11 kW Drive type: Hydraulic Control: Conventional Control system: Elgo Dimensions & Weight Overall length: 6,400 mm Shipping weight: 17,500 kg EQUIPMENT CE certificate Documentation

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: 6.088.177.254, controller model: Durma DT-7, working width: 3,100 mm, sheet thickness (max.): 13 mm, overall weight: 11,800 kg, TECHNICAL DETAILS Max. sheet thickness: 13 mm Max. working width: 3,100 mm Overhang: 50 mm Design: Swing-beam Angle adjustment: Manual Shear gap adjustment: Motorized Back gauge type: Electric Back gauge depth: 1,000 mm MACHINE DETAILS GENERAL Control system: CNC Controller: Durma DT-7 Drive type: Hydraulic Lajdpszuwvvjfx Apmef Power: 30 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,350 x 2,350 mm Weight: 11,800 kg Transport packages: 1 unit EQUIPMENT CE marking Finger guard: Fixed with fold-up guard Table type: Ball-bearing table

Condition: used, Year of construction: 1999, Max. cutting length: 4200 mm Max. cutting height: 45 mm Max. cutting depth: 515 mm Saw blade diameter: 180 mm Clamping beam movement: pneumatic Fencing system: Fence indicator: Dust extraction channel: Yes Dust extraction: external dust extraction Feed type: manual Laodezvzicepfx Apmef Dadoing unit: with diamond-tipped saw blade (secondary cut) Machine type: stationary Weight approx.: 950 kg Dimensions: 5400 x 1180 x 160 mm Motor power: 2.2 kW Dust extraction diameter: 80 mm Storage location: Nattheim

Condition: used, overall weight: 2,800 kg, includes rotary drive motor Laodpfx Apezvyw Somsf includes CW50 mounting for 40-50 ton excavators

Condition: used, functionality: fully functional, 3-meter hydraulic plate shear from Jorg Type: 4865 Lodpfx Apszvynwemsaf Capacity: 3100 x 4 mm Electric back gauge

Condition: used, Year of construction: 2019, sheet width 6080 mm plate thickness 6.0 mm rear stop 1000 mm cutting angle 0.5 - 2.0 ° down holder 29 Stk no. of strokes ca. 10 Hub/min total power requirement 22.0 kW dimensions of the machine ca. 7300 x 2150 x 2750 mm weight 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm Ljdpfszvq Etjx Apmeaf - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device

Condition: good (used), functionality: fully functional, Year of construction: 2008, Used Baykal plate shear Type MGH 3100 16 Laedpfx Aszvqqiepmef Capacity 3100 x 16 mm Adjustable back gauge Adjustable cutting clearance Rear safety guard

Condition: good (used), functionality: fully functional, Year of construction: 1993, Well-maintained, used plate shear from Amada. Type: GPX 1230 Capacity: 3050 x 12 mm Equipped with a high-precision table at the rear. Ljdpfx Aozvqprjpmsaf

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Lajdpfxjx Upgcj Apmsf

Condition: good (used), Silverson EX High shear mixer on stand Stainless high shear mixer on stand, 3Kw, 750mm shaft length, high shear diameter 105mm, 3Ph Lajdpfxezvli To Apmef

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, controller manufacturer: Robosoft, controller model: PC90, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 14 1/min, sheet thickness (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, back gauge: 1,000 mm, overall weight: 8,500 kg, total length: 4,100 mm, total width: 2,400 mm, total height: 2,300 mm, Maximum sheet thickness: 12 mm Max. cutting length: 3100 mm Stroke length at full length: 7 mm Stroke length at short length (1000 mm): 14 Cutting angle: 0.5 - 3° Length of back gauge: 0 - 1000 mm Ledpfszvf Hrex Apmeaf Number of lower clamps: 18 Operation: Mechanical or hydraulic (Hydraulic) Power: 24 kW Length: 4100 mm Width: 2400 mm Height: 2300 mm Weight: 8500 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 18,400 kg, total length: 4,400 mm, total width: 2,350 mm, total height: 2,250 mm, cutting length (max.): 4,100 mm, Equipment: finger protection, safety light barrier, Cuttinglength: 4.100 mm Cutting thickness: 13 mm Back gauge: 1.000 mm Control: Darley Delem Featured with: - Sheetsupporters frontside 4000 mm - Footpedal - Material conveyor Lasdpfx Apowc Sahjmsf - Extra sets knives - Documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18.400 kg

Condition: good (used), functionality: fully functional, Year of construction: 1997, sheet thickness steel (max.): 12 mm, power: 22 kW (29.91 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 8,000 kg, total length: 4,500 mm, total width: 2,600 mm, total height: 2,100 mm, tool weight: 31,500 g, working length: 3,000 mm, VOLZ EURO-CUT 12 x 3050 sheet metal shear Lajdpfozkhywex Apmef - Rated performance, sheet metal thickness, steel: 450 N/mm² - Sheet metal thickness: 12 mm - Max. speed: 88 mm/s feed rate Please note: the item must be picked up on a date to be determined between September 15 and September 17, 2026. FCA D-76474 Au am Rhein – loaded onto a truck.

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Laedpfszuz Hlsx Apmof Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Lasdpfxszuz Hfs Apmef Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1967, Veneer shears Manufacturer: Hymmen Type: AS Year of manufacture: 1967 Technical data - 1-blade veneer shears - Working width: 2800 mm - Package height: 80 mm - Depth: 800 mm Lsdjzuzqwepfx Apmeaf Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, Year of construction: 2006, - Veneer bundle length (fiber direction): 400 - 4000 mm - Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm - Veneer bundle thickness: approx. 10 - 40 - Throughput speed: approx. 27 m/min. Lsdpfx Aozuzp Topmoaf Double gluing machine for veneer Manufacturer: Monguzzi, Carugate Type: Gluemaster Year of manufacture: 2006 For reliable, uniform, and precise application of PVAc or UREA adhesive in a single pass on veneer bundles that are joined parallel on both sides. Fine adjustment of the adhesive quantity and the uniformly applied lateral and vertical pressure on the veneer bundle result in precise, spot-free, and perfectly glued veneers with minimal adhesive consumption. Technical data: Veneer bundle length (fiber direction): 400 - 4000 mm Veneer bundle widths (perpendicular to the fiber direction): 45 - 515 mm Veneer bundle thickness: approx. 10 - 40 Throughput speed: approx. 27 m/min. Special features: - The Gluemaster can be positioned directly next to a veneer gluing machine. - Quickly and easily accessible adhesive containers for fast and easy refilling or cleaning. - Tool-free removal of the adhesive containers and easy cleaning (no dead spots). - Continuous pressure rollers and large pressure plates for uniform pressure on the veneer bundle/edges during gluing. - Rigid 4-point upper roller guide with floating upper rollers to press the veneer bundle without damaging it. - Easily adjustable adhesive quantity. Adhesive pot cooling unit For a longer service life of the adhesive pot, especially recommended for the use of UREA adhesive. 1 motorized discharge roller conveyor To feed the glued veneer bundle out of the Gluemaster and transport it to the connected Fanningmaster. Length of the roller conveyor: 3600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Laodpfx Aozuzptepmjf Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

Condition: used, Year of construction: 2006, - Max. cutting length: 2600 mm - Cutting widths: 45 - 350 mm - Opening of the pressure bar: 100 mm - Width of the pressure bar: 350 mm - Parallel stop with digital display: 25 - 1000 mm - Cutting angle approx.: 45 Laedpfx Apszuzpmjmjf Veneer shears Manufacturer: Monguzzi, Carugate Type: AFD-35/2600 Year of manufacture: 2006 For clean, perfectly parallel and right-angled joining of veneer bundles in a single operation. Thanks to its high productivity, gentle handling of the raw material (no manual turning) and its precisely parallel cut, this guillotine is the perfect machine for preparing veneer strips for splicing. Production Up to 3 bundles/min Technical data Max. cutting length: 2600 mm Cutting widths: 45 - 350 mm Opening of the pressure bar: 100 mm Width of the pressure bar: 350 mm Parallel stop with digital display: 25 - 1000 mm Cutting angle approx.: 45 Features - Solid, robust construction with generously sized pressure bar and cutting table to accommodate the high clamping and shearing forces - Unique system with a fixed, solid cutting table and a movable pressure bar - Laser lights for precise visual identification of the cutting lines - High-quality hydraulic system with a large oil tank - Electrically driven parallel stop with quick adjustment - Industrial computer based on Windows, widescreen monitor and keyboard - Various operating modes and storable program sequences - Extensive recording of production data - Central lubrication unit Movable laser lines For optimizing veneer yield. The manually operated laser line for the position of the front knife can be quickly adjusted. The veneer width is transmitted to the computer at the touch of a button. The cutting process then starts automatically. Note: The technical data and descriptions are a transcript of the order confirmation from that time. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), functionality: fully functional, Equipment: foot remote control, Geka Hydrocrop Hydraulic Ironworker Model: 70 S Angle (90 Degrees):130 x 130 x 13mm Flat: 450 x 15mm Lasdpfx Apozux N Rjmjf Round: 45mm Square:45mm Punching: 28 Dia Through 20mm Dimensions: 2000 x 1200 x 2000mm High Weight: 1800 Kgs