Used Edgebander Edgebander for sale (920)

Year of construction: 1999, condition: used, Edgebander HOLZHER 1436 SE Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery to be agreed Start type to be agreed Description Comments Thickness of max. 13 mm Thickness of the roll core max mm 3 Feedrate max m / min 11 Suitable for PUR glue yes Copier tip 1 motor Cyclin. Profile scraping Aggregates that work pneumatically Machine length 4500 mm Control of the SPK 18000 machine Height of the max. Dimensions in mm 51 Material length min mm 180 Material width min mm 60 adhesive tank yes Iaedpjdp R E Isfx Ah Nsl Saw blade 2 motors Milling unit straight and radius 1 scraper unit up down A polishing unit like this Execution: Right-hand machine CE mark yes CE conformity declaration yes Connection power kW 7 Area min. length / width / height mm 4500x1020x1630 Weight kg 1150 Readiness Basic functions prepared for the presentation In good condition

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, workpiece width (max.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS - Edge thickness (glued): max. 20 mm - Maximum gluing height: 60 mm - Maximum roll material thickness: 3 mm - Piece width: min. 60 mm - Maximum feed rate: up to 25 m/min - Feed: continuous - Electric height adjustment: available - Pressure system: upper belt pressure - Preheating zone: available - Granulate glue system: with pre-fabricated container - Glue pot: interchangeable/variable - Spray unit: available - Pre-milling unit: available - Trimming unit: with 2 motors - Milling stations: flush/radial/chamfer, 1 available Iedpex Tqgbsfx Ah Nsal - Corner rounding unit: with 2 motors - Edge scraper: profile and planer - Buffing unit: available - Strip magazine: available - Units: synchronized units with NC axis/axes - Machine version: left hand side - Quick-change units: available MACHINE DETAILS - Remote control: PowerControl PC 22 - Weight: 5,000 kg - Machine length: 7,845 mm - Standards: CE requirements EQUIPMENT - Special equipment: with nesting - New chains - HOMAG feed device with 2 rollers - HOMAG A 20 glue unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG PN 10 profile pull scrape unit - HOMAG FA 11 finishing unit

Condition: used, functionality: fully functional, Edgebanding unit End trimming unit Trimming unit Iasdpfxoxfuh Dj Ah Nol 2nd trimming unit Sanding unit

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Glue application station GLU-JET cartridge + PU bonding Iedex Ux U Ajpfx Ah Noal Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Iaedox Twdtjpfx Ah Nsl

Condition: used, machine/vehicle number: 007485, Position 1: Angular Beam Panel Saws IMA-COMBIMA SYSTEM + AH6 Position 2: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 3: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 4: Panel Turning Device IMA-COMBIMA SYSTEM + AH6 Position 5: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 6: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 7: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 8: bordatriceLottoUno IMA-COMBIMA SYSTEM + AH6 Position 9: Panel Turning Device IMA-COMBIMA SYSTEM + AH6 Iodpfx Ajwuz Aioh Noal Position 10: Panel Stacking and Offloading IMA-COMBIMA SYSTEM + AH6 Position 11: Roller Conveyors IMA-COMBIMA SYSTEM + AH6

Condition: used, Year of construction: 2021, functionality: fully functional, We hereby offer this used SCM Olimpic K 560 edgebanding from 2021, located in Spain. offers high-performance capabilities for professional woodworking operations. It supports edge thicknesses ranging from 0.4 to 8 mm and accommodates panel thicknesses between 8 and 60 mm. With a variable feed speed of 12 to 18 m/min, this model is well-suited for both precision and efficiency in edge processing. Iaedexq Hn Hepfx Ah Nsl Included with the Machine: with a feed-in router. Motorized press.

Condition: like new (used), operating pressure 10 bar weight 1300 kg belt table length 3000 mm Iodpfxjx U U Hhs Ah Nsal roller table length 2000 mm return conveyor length 2070 mm 400V CE marking year of manufacture 2007

Condition: used, Year of construction: 2016, operating hours: 2,500 h, Single-sided edge banding machine for processing straight workpiece edges and for applying and further processing various edge materials in longitudinal and cross feed. OVERVIEW OF THE AGGREGATE CONFIGURATION: - Infeed fence extension by 300 mm with additional unit for laminate overhang - JOINTER UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feed – APPLICATION UNIT QA 65 N EVA - TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT TRIMMING - Multi-stage milling unit MS40 2 x 0.55 kW with opposed rotation and axis adjustment – with PNEUMATIC 2-POINT ADJUSTMENT of tracing rollers (flush and radius/bevel milling) - MULTIFUNCTION FORM MILLING UNIT 2 x 0.4 kW - MULTISTAGE SCRAPING UNIT MZ 40 - PNEUMATIC SCRAPER ADJUSTMENT - GLUE JOINT SCRAPER - BUFFING UNIT Iedpfx Ahox S Nc Ee Neal - SEPARATING AGENT SPRAY UNIT WORKPIECE - Glide agent spray unit - CLEANING AGENT SPRAY UNIT WORKPIECE - POWERTOUCH control system

Condition: excellent (used), Return devices, return conveyor for edgebander boomerang Ligmatech ZHR 05 Iajdpfx Asx Uxaxsh Nsl Year: 2012 Model: ZHR01/R/055 Dimensions: Boomerang - 250 x 210 cm Belt - 360 x 125 cm Rollers - 200 x 120 cm Feed speed range: 8-25 m/min

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing unit, including DIA tools • Jointing capacity up to 40 mm • Workpiece thickness up to 3 mm • Combination milling station, radius R 2.5 mm Technical Description: - Hot melt adhesive application to the workpiece for edge materials up to 3 mm - Workpiece thickness up to 60 mm without jointing unit, up to 40 mm with jointing unit - Maintenance-free, coated gluepot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with replaceable cutter heads (combination version) and fine adjustment from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment of the end-trimming saw - Signal lamp for workpiece flow - Robust chain feed - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregate windows on machine rear and operator side - PLC control with touchscreen included Technical Data: - Feed rate: 10 m/min - Panel thickness: 8 – 40 mm - Weight: approx. 1550 kg (depending on configuration) - Dimensions (L x W x H): 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spray system (2014) • 1 pc hot air unit for visual zero joint using special edge materials • Including pneumatic gluepot positioning • Including cooling and antistatic spray system • Including 2 additional quick-change edge channels • Including special version corner rounding unit; max. workpiece thickness 60 mm, min. length 200 mm - Exclusively for Hebrock 3000 series edgebanders - Retrofitting possible at extra cost upon request Technical Data (special unit): - Max. panel thickness: 40 mm - Edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (only Airtronic), electronically controlled - Ready for operation after approx. 2 min Upgrade to 8 mm edge thickness possible; max. workpiece thickness 40 mm • Including pneumatic saw adjustment (special version, min. workpiece thickness 8 mm) • 3-point pneumatic milling shift • Selector for radius/chamfer/flush for combination milling stations, eliminating manual changeover (PLC control required) Buffing station (swab): 1 pc Ijdpfex S Hmzex Ah Njal Corner rounding unit: 1 pc incl. combination tooling and pneumatic radius/chamfer adjustment, max. 40 mm workpiece thickness, min. 300 mm workpiece length, Radius R 2.0 mm Radius scraper: 1 pc with pneumatic lift, Radius R 2.0 mm Flat scraper: 1 pc with pneumatic actuation Complete chassis: 1 pc Glue station quick-change system incl. glue discharge system (downward outlet in preparation), 1 pc (no second gluepot), machine can process PU adhesive Grooving unit (vertical for panel): 1 pc incl. pneumatic lift, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from panel edge 14.0 mm; special motor version with higher performance Extraction for internal jointing unit: 1 pc connected to machine's extraction manifold Corner rounding cutter ball bearings: 24.1 mm (1 pc), 24.2 mm (1 pc) Edge protection spray system: 1 pc for sensitive edge materials Combined spray system (separating and cleaning agent): 1 pc Location: Supplier stock

Condition: ready for operation (used), Year of construction: 2002, This IMA Combima complete edge banding line with loading station was manufactured in 2002. A robust double-sided edgebander, it features a working width of 235 to 2600 mm and a length range of 200 to 2600 mm. Capable of speeds from 10 to 40 m/min, it includes jointing milling, a semi-automatic gluing unit with a 6-piece edge magazine, and both straight and profile trimming units. Consider the opportunity to buy this IMA Combima double sided edgebander. Contact us for more information about this machine. Iajdpfx Asx D Iq Njh Njl Application Types Edge Banding

Condition: used, Year of construction: 2010, operating hours: 24,804 h, functionality: fully functional, machine/vehicle number: 0-200-95-8810, We have a fully operational Single side edge bander with return conveyor very high spec machine .The machine is currently being used so more than welcome to see it run. Iajdjx Upuajpfx Ah Nol

Condition: excellent (used), Edge banding machine Advantage 4612F - Regularly serviced, year of manufacture 2002 - Total length 6000 mm - Width 2400 mm - Height 2300 mm - Weight 3100 kg - Feed speed 12 m/min - Workpiece dimensions: width 65 mm, max. thickness: 45 mm, min. thickness: 10 mm, length: 150 mm, edge height 55 mm, 7 bar pressure - With two interchangeable glue pots - Pre-milling, flush cutting, multifunctional unit, profile and surface scraper, buffing unit Isdpfxsx Srp Is Ah Nsal - With pre-milling unit

Condition: excellent (used), Year of construction: 2010, Single-sided edge banding machine for processing straight workpiece edges as well as applying and post-processing various edge materials in both longitudinal and transverse feed directions. OVERVIEW OF THE EQUIPMENT CONFIGURATION: Ijdpsx S I Iyjfx Ah Neal - POWER CONTROL PC 20+ electronic control - PU upper pressure rollers instead of rubber rollers - Workpiece gap optimization - Infeed fence extension by 300 mm with additional device for laminate overhang - JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz - GLUING UNIT A12 with automatic edge feeding – Quickmelt application unit – Standard application unit interchangeable for PU glue - Pressure zone with motorized adjustment - END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.35 kW - PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT - PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING - PRE-MILLING UNIT 2 x 0.55 kW counter-rotating – with PNEUMATIC 2-POINT ADJUSTMENT (flush and radius/chamfer milling) – Program control for side tracing rollers stepless and edge thickness – Multi-roller tracing - MULTIFUNCTION PROFILE MILLING UNIT 2 x 0.4 kW with exchange system and quick-change heads - PROFILE SCRAPER WITH QUICK-CHANGE HEADS - Special tracing for profile scraper - PNEUMATIC ADJUSTMENT SCRAPER - GLUE JOINT SCRAPER - POLISHING UNIT - RELEASE AGENT SPRAY UNIT WORKPIECE - CLEANING AGENT SPRAY UNIT WORKPIECE

Condition: used, Year of construction: 2019, operating hours: 3,488 h, functionality: fully functional, machine/vehicle number: 0-261-71-2252, type of input current: three-phase, input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, We offer this used HOMAG EDGETEQ S-300 edgebander, year of construction 2019. Type: EDGETEQ S-300 Subtype: OPTIMAT KDF 440 C Machine number: 0-261-71-2252 Wiring diagram: 0-261-71-2252 Year of manufacture: 2019 Supply voltage: 400Y/230 V Phases: 3 Phase Frequency: 50 Hz Maximum operating full load current: 22 A Iedpfx Aox Tt D Nsh Neal Fuse rating: 25 A Short circuit current rating: 5 kA rms symmetrical Control voltage: 24 V Enclosure type: NEMA 1 Largest motor current: 5.7 A Largest heater current: 2.3 A If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Hebrock 3003 Edge Bander well equipped, can be tested before purchase Initial MILLING AirTronic zero joint glueless system - hot air glue application with a roller, pneumatic preliminary guillotine pressure rollers anti-adhesive fluids finished cutting saw top-bottom milling unit, R1 - R2 pneumatically adjustable corner milling unit pneumatically adjustable flat scraper max element height 50mm Isdpfjwmc I Dsx Ah Noal max veneer thickness in roll 3mm feed 10m/min power consumption 15.8KW very good condition, fully fulfills its functions

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Feed Speed: 7 m/min / Min. Panel Length: 80 mm / Min. Panel Width: 60 mm/ Max. Panel Height: 40 mm / Edge Thickness: Up to 3 mm / Glue Pot Capacity: 2 liters Iedpfx Aox R E Nfjh Neal End Trimming: Dual vertical saws at 12000 rpm / Profile Trimming: Inclined unit at 15° with 12000 rpm This 6-axis Bi Matic CH 2.2 edgebander was manufactured in 2010, featuring a glue pot capacity of 2 liters and dual vertical saws for end trimming at 12,000 rpm. It supports edge thickness up to 3 mm and requires an air pressure of 6 bar. If you are looking to get high-quality edgebanding capabilities, consider the Bi Matic CH 2.2 machine we have for tact us for more information. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2014, Used edge banding machine from business liquidation Iodpfx Ajx Tcwfeh Nsal STEFANI One Touch - Year of manufacture: 2014 - including BARBARIC return system from 2016 - immediately available We are happy to answer any questions you may have.

Condition: used, Year of construction: 2016, Plate feed direction: from operator to the left Max. edge banding thickness: 2 mm Iedpfex Tct Hox Ah Njal Min. workpiece thickness: 10 mm Max. workpiece thickness: 40 mm Min. workpiece length: 180 mm Feed speed: 7 m/min Heating time: 4 min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutter Diameter: 70 mm Height: 43 mm Infeed fence adjustment: Diamond cutter Cut-off shears up to: 2 mm Single edge feed: possible Gluing: Glue application roller Cut-off saw: Yes Combination unit Flush/Chamfer/Radius: pneumatically adjustable Scraper blade: Yes, sensing Unit display: on screen Control type: PLC line control Operation: Touch screen Motor power: 7.4 kW Travelling device: Yes Extendable roller support: Yes Protective hood: Yes Weight approx.: 750 kg Extraction connection diameter: 140 mm Electrical connection: 400 Volt/50 Hz Storage location: Customer

Condition: used, machine/vehicle number: 007956, Position 1: Roller Conveyors HOMAG-PROFI KFL 350/11/A3/WZ14 Iajdpewuudmjfx Ah Nel Position 2: Single Edgebanders HOMAG-PROFI KFL 350/11/A3/WZ14 Position 3: Panel Return Systems HOMAG-PROFI KFL 350/11/A3/WZ14

Condition: not inspected (used), Year of construction: 1997, Automatic edge banding machine Iasdpfswfw Rdox Ah Njl Gluing group rectifications trimming rounding spindle moulders finishing groups

Condition: used, Edgebander Holzher Sprint 1317 Pre-milling units Glue application, glue cartridge Iedpfx Ajx Tf D Ujh Nsal Pneumatic pre-cut guillotine Pressure rollers Cut-off saws Top and bottom milling units Corner rounding unit Profile scraper Flat scraper Polishing unit Max edge height mm: 50 Edge band thickness in roll: 3 mm Feed speed: 10 m/min The machine requires servicing as well as setting and adjustment. The machine can be switched on; all units activate, but the front saw does not respond to material and the corner rounding unit needs adjustment.

Condition: used, Year of construction: 1994, Edgebanding machine Manufacturer: Hebrock Model: AKV 2001 DK Year of manufacture: 1995 Ijdpfx Asx Tcbqeh Njal CE type-approved GS wood dust tested Minimum workpiece width: 70 mm Minimum workpiece length: 300 mm Workpiece height (min. - max.): 8 - 50 mm Edgeband thickness (min. - max.): 0.4 - 8 mm Feed speed: 11 m/min Cut-off saw unit Flush and radius trimming unit Hot melt glue tank Support plate Pneumatic roller trimming up to 3 mm edge thickness Flush trimming unit with combination insert cutter for radius, straight, and chamfered machining Extraction connection D 140 mm Connection: 380/50 Volt/Hz Total connected load: 12 kW Weight approx. 550 kg

Condition: used, machine/vehicle number: 007906, undefinedPosition 2: Single Edgebanders HOMAG-PROFI KFL 350/10/A3/WZ Iajdpfx Ahowucm Aj Njl