Used Veneer Turner for sale (669)

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Nkodpfx Ahsyw Tcgsvsw Weight: Estimated: Lbs250.0 Dimensions: 700mm X 1450mm

Condition: good (used), Hotung LK-PW1 Paper Pallet Turner, B1+ Format The machine is like new, fully functional, and ready to use. Technical Specifications: Format: 1280×800 mm Stack height: max. 1340 mm Load capacity: 1000 kg Device weight: 860 kg 380V power supply Nsdpjyl Rxajfx Ahvokw Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving.

Condition: used, Premier Pallet Inverter / Turner Model FS1600 Max opening - 1575mm, Min opening 900mm Max capacity load 7,000kg Load tables dimensions 1300mm x 1250mm Cycle time 45 seconds Invert boxes, bags, drums, pails, cans, glass vials, sheet steel and plastic, toilets, gas cylinders, super sacs and gaylords Nksdpfx Ajwkhnqohvjw Handles almost any palletized load including slippery or unstable goods due to its high clamping pressure Recover damaged materials from the bottom of a load Replace wood pallets with plastic, aluminum, or other more hygienic pallets Transfer materials from a damaged pallet Change orientation for printing and other general purposes

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 4712, pressing force: 120 t, cylinder diameter: 90 mm, number of cylinders: 6, pressing speed: 200 mm/s, TECHNICAL DETAILS Maximum pressure: 120 t Pressing area dimensions: 2,500 x 1,300 mm Pressing height: 200 mm Number of cylinders: 6 Cylinder diameter: 90 mm Pressing speed: 12 m/min EQUIPMENT Complete line with: Loading system Gluing machine Destacker Nodpfxoyuxh Ij Ahvskw High-frequency cabinet (offered separately)

Condition: used, Year of construction: 1984, pressing area: 3000 mm x 1350 mm opening: 400 mm heating: electrically plate sourface: alu emergency stop switch: yes / ripcord pressure: 140 t Nkjdpfx Ahjyxgaujvsw number of cylinder: 8 electriticy: 34 A motor power: 22,4 kW machine length: 3550 mm machine width: 1550 mm

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Njdpfx Ahsvvkazjvjkw Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Nkjdpfovvkblox Ahvjw

Condition: good (used), Toppy Maxi PH Advance Mobile Pallet Turner This machine is like new, fully functional, and ready to work. Year of manufacture: 2013. Technical specifications: Nkodpfx Asywdtishvsw Format: 800 x 1200 mm Stack height: 1800 mm Load capacity: 1500 kg Device weight: 1400 kg Includes a built-in battery charger. Control panel, fast operation, hydraulic drive. Quiet operation. Compact design, space-saving. Made in Italy.

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price Nedpog Nn E Nefx Ahvskw • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), For sale: Veneer press OTT JU70 Press dimensions: 2,500 x 1,350 mm With safety tear cord 19.3 kW Njdpfx Asyw Tfzehvokw

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Nkjdpfx Ahsfh Tmmjvow Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Nksdpfx Ahswd N Rmjvew Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Nedpfjxgpaqsx Ahvskw Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Nsdet Eq E Sepfx Ahvokw Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Nodpfxjyw H H So Ahvskw Clearance 400 mm Water heating

Condition: used, column arm 420 mm Feed speed ca. 6 m/min. Veneer splicing machine Kuper type FW/Mini for precise gluing and splicing of veneer sheets with glue thread. Ideal for smaller businesses or flexible use in the production of high-quality veneer surfaces incl. adhesive thread posts. Nkjdewrfbdspfx Ahvsw

Condition: used, SPRINGER revolver log turner Nkedpfx Aheyvhiljvjw

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Bürkle veneer press S 80, year of manufacture approx. 1982, overall dimensions: 3080 x 1550 x 1800 mm, weight 4500 kg, 80 t pressing force, 6 cylinders, pressing area 2500 x 1300 mm, heating plates have been tested, hydraulic drive, robust construction, good condition, fully functional. Price ex works. Shipping available at extra cost! Nedjyvhkvjpfx Ahvskw

Condition: good (used), Code: 0263 Brand: MONGUZZI Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Cutting length 4300 mm Max register depth 1500 mm Min register depth 25 mm Useful presser opening 80 mm Nkodpfx Ahex Hfr Sevjw Presser width 360 mm Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: good (used), Code: 0331 Brand: OMPEC - ITALY Model: TRO 3500 Automatic hydraulic single-blade veneer guillotine Technical data Sturdy structure Cutting length 3500 mm Cutting height 80 mm Nodpfxeyu T Hrs Ahvjkw Cutting display light Max cutting width 1000 mm Min cutting width 23 mm Electric rear resgister Dual control panel Work surface height 950 mm Safety photocell Electrical power 5,5 Kw Weight kg 3600

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Nkodpfx Aex Upgcohvjw

Condition: good (used), functionality: fully functional, 2.5 HP motor, max. cutting height approx. 45 mm, saw blade diameter approx. 180 mm, depth to fence approx. 500-530 mm, fitted with extraction unit, rear fence table, support consoles/support table, pneumatic pressure bar / workpiece clamping, ex location. Shipping available at extra cost! Njdpfxsyu Sl Ts Ahvjkw

Condition: good (used), Year of construction: 1968, functionality: fully functional, Press size: 2550 × 1350 mm Pressing force: 80 t Opening: approx. 400 mm Heating: electric, approx. 10–24 kW Connection: 380 V Weight: approx. 4 t Design: electrohydraulic, 4 cylinders Robust construction Nksdpfxjyu Sifs Ahvew Ideal for veneer work and panel bonding From location The machine is in good and well-maintained condition for its age. Solid industrial quality – durable and reliable. Shipping available at extra cost!

Condition: good (used), Code: 0328 Brand: ITALPRESSE Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Nkodpfx Ajyuyl Ijhvew Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: excellent (used), Year of construction: 1980, Veneer Press Manufacturer: OTT Model: JU 2211 Nkodpfx Ahsywgr Uovow Year of manufacture: 1980 Plate size: 2,200 x 1,100 mm Opening height: 400 mm Pressing force: 70 t Specific pressing force: 2.9 kg/cm² Heating: Electric Plates: Gold anodised Safety device: Emergency stop cable