Used Veneer Splicer for sale (542)

Condition: excellent (used), Catalog number: 7551 TECHNICAL DATA veneer thickness: 0.4-2 mm clearance width under the frame: 920 mm foot pedal control tabletop dimensions: 1250x340 mm 2 metal pressure rollers air consumption: 6 bar rubber roller, pulling from below 2 smooth metal pull rollers motor: 0.55 kW dimensions (L/W/H): 1400x550x1500 mm weight: 205 kg – German-made – unpainted – DTR documentation included – very good condition – used stapler Fgsdpfxjztwhpj Al Aoh Net price: 6900 PLN Net price: 1605 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Second-hand machine Second-hand veneer splicing machine from Kuper, model FW 1150 Passage width: 1150 mm Feed speed: approx. 10–30 m/min Veneer thicknesses: 0.3–3 mm excluding tables at the front and rear Availability: at short notice Location: Röllbach Fgsdpfszk Nqqox Al Aeh

Condition: good (used), functionality: fully functional, The machine consists of: 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit Fgjdpsvnri Iefx Al Aoh 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: used, Year of construction: 1993, Second-hand machine Fjdpfjzk N D Rjx Al Ajgh Year of manufacture: 1993 Bench-top machine The zigzag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm in length, 35 mm in width and a thickness of 0.3–2 mm Electrical connection: 230 V Column reach 700 mm Material feed rate approx. 6 m/min. Weight approx. 54 kg Availability: at short notice Storage location: Flörsheim

Condition: used, Kuper FW 630 Mini The ideal machine for small quantities of veneer, incorporating the technical advantages of all KUPER zigzag gluing machines: Disc cutters with a tolerance compensation mechanism. A KUPER special adhesive thread is used as the adhesive. Fgjdpfx Aobi I Apsl Ajh The adhesive thread, which is applied automatically in a zigzag line, guarantees a dense and firm joint connection. During pressing, the adhesive thread is positioned inwards, eliminating the need for subsequent sanding of the adhesive. Technical data: Standard width: 630 mm Veneer thickness: approx. 0.4 - 2.0 mm Feed rate: approx. 7 m/min Operating voltage: 230 V, 50 Hz/60 Hz Total power consumption: 110 VA Space requirement: 1050 x 905 mm = 0.95 m² Overall height: 475 mm Net weight: 95 kg Gross weight: 110 kg Constantly in stock: 10 units of FW 420, FW 630, FW 920.

Condition: good (used), Code: 0493 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Fgodpjz Ia T Usfx Al Ash Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95

Condition: good (used), Code: 0491 Brand: KUPER Model: FW MINI 630 - CE Standard Thread splicer for veneer,for joinery workshops, doors, furniture, veneer, custom-made furniture, panels and various items - CE Standard Technical data Arm mm 630 Veneer thickness mm 0,4 - 2 Feeding 7 mt/min Voltage 220 volts Overall dimensions: mm 850 x 370 x 400 h Weight kg 31 Fodpfoz Hw S Sex Al Ajgh

Condition: good (used), Year of construction: 1995, Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Fgedpfxshbp Ifo Al Aeh Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: good (used), Code: 0240 Brand: KUPER Model: FW /J 900 Veneer thread splicer Technical data : Throat depth mm 900 Feed speed mt 15/min Thickness of veneer 0,4 - 2 mm Fgsdpfx Aeyxmrwjl Ajh Motor 0,18 Kw Overall dimensions: mm 1350 x 580 x 1600 h Weight kg 300

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Fjdpfx Aozuz Hlsl Aogh Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Fgsdjzuz Hfopfx Al Ajh Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1961, Used Machine Features and Technical Specifications: Fodpfezyy Apox Al Aogh Pressing surface size: 2500 x 1300 mm Machine is designed for disassembly Total pressing force: 60 metric tons Specific pressing force: 1.85 kg/cm² Plate spacing: 350 mm L x W x H: approx. 3,230 x 1,340 x 1,775 mm Availability: immediately Location: Rhineland-Palatinate

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Pressing area: 255 x 135 cm - Pressing force: 100 metric tons - Number of press cylinders: 4 - Cylinder diameter: 100 mm - Opening width: 400 mm - Press plates: gold-anodized ELKOM plates - Heating: electric Fsdez Np Thepfx Al Aogh - Heating capacity: 18 kW - Maximum temperature: approx. 120 °C - Weight: approx. 4,500 kg - Safety pull cord will be retrofitted

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Fsdez I Tipopfx Al Aegh Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Current consumption approx. 22 A Fuse 25 A Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Weight approx. 14,000 kg

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 – Length of working plates: 4200 mm – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal Fedjz Ix Auepfx Al Aogh CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 21370-07-1268, functionality: fully functional, Available from April 1, 2027, for self-dismantling and self-collection. Langzauner heating press / veneer press, type LZT 100-SF, manufactured in 2007. The machine is suitable for pressing and gluing sheet materials, veneers, and comparable workpieces. It features heated press surfaces and a hydraulic pressing device. The upper and lower heating elements can be switched on separately. Technical data • Manufacturer: Langzauner • Type: LZT 100-SF • Year of manufacture: 2007 • Factory number: 21370-07-1268 • Heating: upper and lower heating • Temperature display: separate for top and bottom • Pressing time: adjustable • Opening time: adjustable • Automatic opening: available Fgodpfx Alez Dai Uo Aoh • Electrical connection: 3 × 400 V + N • Frequency: 50 Hz • Rated current: 42.2 A • Connected power: approximately 27 kW according to the nameplate • Hydraulic press with 6 press cylinders • Safety cable / safety device • Press surface heating plates in top condition, no damage • Heating plate size: 3,000 × 1,300 mm • Max. press opening / stage clearance: 400 mm • Total pressing force: 100 tons • 6 press cylinders • Electric heating plates

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, working width 2700 mm working height 100 mm hydraulic cutting Fodpfx Aloz Ehqce Asgh gauge adjustment to size cast body power supply 400V 3000 kg Year of manufacture 2004

Condition: used, Year of construction: 1969, machine/vehicle number: 5700, functionality: fully functional, ram plate width: 1,350 mm, ram plate length: 3,000 mm, year of last overhaul: 2011, This OTT veneer and carcass press impresses with its robust industrial design and an exceptionally large press format of 3,000 × 1,350 mm, featuring 2011 new heating plates. While many presses offer only a press width of 1,200 to 1,300 mm, this machine enables the processing of particularly large workpieces and special formats. A major advantage is the 2011 renewal of the heating plates by ELKOM, which significantly upgraded the press technically and ensures its continued reliable operation. Fedpfjz Dq S Hox Al Aogh The OTT press is ideally suited for carpentry workshops, joineries, interior fitters, as well as manufacturers of doors, stairs, and furniture. Thanks to its stable hydraulic construction, it offers uniform pressure distribution and is suitable for both veneer work and demanding gluing of solid wood and composite materials.

Condition: used, Year of construction: 2006, functionality: fully functional, USED KUPER FW/J-920 VENEER COMPOSING MACHINE IN GOOD CONDITION FOR SALE! Fsdpfxsz Dw Dio Al Aogh

Condition: used, Year of construction: 1993, Pressing area: 2200 x 1100 mm. Plates are gold-anodized and fitted with a safety retaining cord. Connection value: 6 kW. Nominal volume: 140 l. Permissible operating pressure: 6 bar. Nominal operating current: 15 amps. Permissible operating temperature: 100° C. Storage location: Nattheim. Fjdpjz Ng Sbjfx Al Aogh

Condition: used, Year of construction: 2020, total length: 3,000 mm, total width: 1,300 mm, total height: 1,900 mm, Veneer press Manufacturer: Stema S.r.L. Fjdpsz Ip H Rofx Al Aogh Type: P – 90 C Year of manufacture: 2020 Dimensions (l/w/h): 3,000 x 1,300 x 1,900 Weight: approx. 3,800 kg Pressing force / pressure: 70 – 90 t Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial businesses. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 1983, Max. press length: 2500 mm Max. press width: 1250 mm Total pressing force: 80 t Specific pressing force: 2.5 kg/cm² Fsdpfjzkl Tbox Al Asgh Press opening width: 400 mm Heating plate material: standard aluminum Operation: button control Swivel button: Yes Number of pressure pistons: 4 Safety edge strip: Yes Condition of heating plate: good Weight: 3800 kg Dimensions: 2850 x 1410 x 2000 mm Storage location: Nattheim

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm pressure 3kg/cm2 pump motor power 2,2kW Fodpfxjz D Afrj Al Aegh

Condition: good (used), Year of construction: 1995, overall weight: 4,500 kg, High-quality veneer shears with 2 blades for optimal joint cutting. Fgodszvvffspfx Al Aeh Maximum processing length: 2600 mm. CE marked.

Condition: used, Year of construction: 1999, Stand-off distance: 920 mm Fedezqyx Sopfx Al Asgh Feed rate: 15 m/min