Shelf press Tiger 1000x2200 19/26

Tiger 1000x2200 19/26

Condition: refurbished (used), functionality: fully functional, Refurbished, six-piston hydraulic flatbed press of Italian manufacture. Branded veneer press for easy wood veneering, with warranty and service. Veneer sheet dimensions: 3000 x 1300 mm Ndodpevvbbcefx Ahkea Pressure at full surface: 2.5 kg/cm2 Total maximum pressure: 90 tons Number of hydraulic pistons: 6 MYLAR Teflon film on the plates Prepared for water-based plate heating Option to install a hot water boiler Price includes complete machine refurbishment Price: 12,000 EUR (excluding VAT) The machine is refurbished, adjusted, and tested. The condition of the refurbishment and the machine's readiness for delivery must be verified in advance! In stock: Telnice near Brno, Czech Republic Testing, demonstration of the machine, and operator training are standard.

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Njdpfx Aet Uduxehkeda

Year of construction: 2021, condition: new, Overband plate magnet from remaining stock / overproduction Manufactured from stainless steel 1.4301, hermetically sealed. For sale: a plate magnet with threaded holes on the back. The magnet can be used as a "police magnet" or to filter out metal contaminants above a conveyor belt. Ring eyelets for suspension are included. Dimensions of the magnet block: 620 x 420 x 250 mm Ndjdpfsfktk Hsx Ahkja Only 1 unit available for immediate delivery. Many other dimensions available in stock.

Condition: used, Year of construction: 1970, Year of manufacture: 1970 Ndsdpjwx Rrnofx Ahkja Total pressing force at 320 atü: 80 tons Pressing cylinder: 6 pistons Motor power: 1.1 kW Heating-up time approx. 20 min. Price ex works.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. Ndedpsuak Nljfx Ahkja This is not part of the offer price.

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Ndodpoyr Tx Ajfx Ahkja Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 100,000 l, storage tank 100.000 litre volume for heating oil, diesel or HVO Ndsdpji A Hx Iofx Ahksa

Condition: not inspected (used), Year of construction: 2023, functionality: unexamined, Description: For sale is a dismantled TRANE chiller unit, model CGAX 015 SE LN, manufactured in 2023, including a chilled water buffer tank KWP 2500 with a capacity of 2,500 liters, as well as visible accessories as shown in the pictures. The unit has already been dismantled and is available for collection by appointment. Suitable for industrial cooling, process cooling, building cooling, or technical refrigeration applications. Njdpozaqdfofx Ahkoda Technical data for the TRANE chiller unit according to the nameplate: Manufacturer: TRANE Model / Type: CGAX 015 SE LN Serial number: EL G04 587 Year of manufacture: 2023 Refrigerant: R454B Voltage: 400 V / 50 Hz / 3 phases Max. current consumption: 36 A Starting current: 118 A ICC: 12 kA Weight: approx. 467 kg Operating pressure HP: 41 bar Operating pressure LP: 31.1 bar Made in France Technical data for the chilled water buffer tank: Type: Chilled water buffer tank KWP 2500 Serial number / Year of manufacture: 712236 / 2023 Capacity: 2,500 liters Max. operating pressure: 10 bar Operating temperature: -10 to +50 °C Corrosion protection: unpainted inside, primed outside Not suitable for drinking water Made in Germany Scope of delivery as of now: TRANE CGAX 015 SE LN chiller unit Chilled water buffer tank 2,500 liters Pump technology / Wilo components Piping and fittings as shown in the pictures Base frame / installation structure as shown in the pictures Condition: Used, already dismantled. The unit was manufactured in 2023 and is in good optical condition. Inspection possible by appointment. Sale exclusively to commercial businesses. Subject to prior sale, errors and changes. All information without guarantee. Sale is made excluding any warranty or guarantee.

Condition: new, Year of construction: 2026, Two-Shaft Shredder GL32120 – 30 kW + 30 kW – NEW SHREDDER EQUIPPED WITH HYDRAULIC PRESSURE (PLEASE REFER TO THE ATTACHED TECHNICAL DRAWING OF THE MACHINE) GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new industrial two-shaft shredder, 3E Machinery GL32120, equipped with two independent drives, each with a power of 30 kW. The machine operates at low speed and high torque, making it suitable for demanding industrial applications and shredding a wide range of materials. TECHNICAL SPECIFICATIONS: Model: GL32120 Type: Two-shaft shredder Motor power: 30 kW + 30 kW Rotor length: 1,200 mm Rotor diameter: 430 mm Number of knives: 30 pcs. Knife thickness: 40 mm Nsdpfx Ahevpuafekjda Shredding chamber dimensions: 1,212 × 736 mm Machine dimensions (L × W × H): 3,650 × 1,346 × 2,275 mm Weight: approx. 5,200 kg Control system: electrical control cabinet with Siemens PLC Condition: Brand new APPLICATIONS: The GL32120 two-shaft shredder can be used for shredding various materials, including: plastics, industrial waste, wood and pallets, electronic waste, barrels and containers, municipal waste, paper and cardboard, metal-containing waste, used tires, and many other materials intended for recycling. The robust design and low-speed, high-torque shredding system make the GL32120 an excellent solution for heavy-duty recycling applications. The modular construction of the shredding chamber provides easy access to the main components for maintenance and servicing. Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Full range of our shredders, granulators, and recycling lines: GrabTrade – shredding and recycling machines.

Condition: excellent (used), Year of construction: 1997, I sell the press for veneer and foil ORMA NPC-30 4-40 2500 x 1200. Product size max. 2500 x 1200mm Oil heating. Total power 21,7 KW at maximum. Ndedju E E A Topfx Ahkja Very good condition. Available immediately.