Used Veneer Patcher for sale (524)

Condition: excellent (used), Year of construction: 2001, Veneer Saw Mayer FH2-3520, Precision Cutting Saw with Jointing Unit (Planing Unit) and Veneer Stop Table Robust machine construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and gap-tight cutting of veneer, including thick-cut veneer Max. cutting length: 3,500 mm Saw unit and jointing unit are combined in one assembly, so only one unit needs to be moved. Easy-to-operate saw unit running on linear guides. Rear support table with through-finger stop, adjustable from approx. 2 – 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Iajdpfx Aox Hqtzoh Nol Saw drive motor: 1.8 kW, milling unit: 1.2 kW Motors can conveniently be switched on at the handle, so they only run when needed. Fine-cut blade equipped with carbide teeth, sharpened Planer head Z4, fitted with new carbide indexable inserts, including spare blades Practical front veneer storage, extendable for the planing unit 100 mm extraction connection with extraction duct CE certification Operating manual On-board tools Original paintwork, only a few areas touched up Dimensions approx. 5,050 x 1,700 x 1,400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our location by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'other offers from this supplier.'

Condition: used, Year of construction: 1972, functionality: fully functional, pressing force: 240 t, opening width: 150 mm, plate length: 3,300 mm, working height: 900 mm, plate width: 1,400 mm, Automatic Veneer Throughfeed Press Ott Pressomat D 99/240 with 6 cylinders in operational condition: – Heating plate size approx. 3300 x 1400 mm – Total pressing force approx. 240 t – Specific pressing pressure approx. 5 kg/cm² – Number of steel heating plates: 2 pieces – Heating plate thickness approx. 40 mm – Number of hydraulic cylinders: 6 pieces – Piston diameter: 6 x 140 mm – Piston stroke approx. 150 mm – 4-way rack and pinion guide – Working height approx. 900 mm Iaodpfxex Nr Eds Ah Nel – Plastic Mylar belt – Automatic end-feed loading – Loading station / feed table in front of the press – Conveyor belt approx. 7100 x 1420 mm – Pneumatic control – Roller track (disc rollers) in front of/above the loading station – Roller track approx. 2000 x 1400 mm – Disc rollers running in a water bath – Roller conveyor with mobile support feet – Outfeed roller conveyor approx. 3300 x 1400 mm – Hot oil boiler HG 80 for heat transfer oil – Heating capacity approx. 80,000 WE/h – Oil burner for light fuel oil – Year of manufacture: 1972, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test run possible by appointment

Condition: good (used), Code: 0263 Brand: MONGUZZI Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer Iasdjx Hfr Sspfx Ah Nol High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Cutting length 4300 mm Max register depth 1500 mm Min register depth 25 mm Useful presser opening 80 mm Presser width 360 mm Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: used, Kuper Type FW/Mini veneer splicing machine for precise gluing and splicing of veneer sheets using glue threads. Ideal for smaller operations or flexible applications in the production of high-quality veneer surfaces. Includes a supply of glue threads. Stand throat: 420 mm feed: approx. 6 m/min Iodpfx Aswrfbdsh Neal

Condition: excellent (used), Independent Machine, Top machine Iaedpfx Ajgx Hnhoh Nol Max working width mm 1350 Working height (thickness) mm 3 - 130 Built-in electric and command panel Electronic Programmer PCM (software Costa Sanding Manager) Feeding speed (adjustable) 4 - 24 m/min No. 1 Vacuum unit (power Kw 11) Pressure "shoes" to allow the process of short workpieces Air blowers on the abrasive papers Total power installed KW 69 No. 7 Working groups: 1°) Cross belt TR7, pad with No. 84 sectors (TPR16) (Kw 15, with inverter) 3-16 m/sec 2°) Cross unit XLS (for trimming), with N° 122 abrasive elements (Kw 1,5, with inverter) 3°) Longitudinal unit FTR-3, roller (diam. mm 330) Kw 2,2 with inverter, 40 Sh (3-20 m/sec) 4°) Longitudinal belt TP16, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 5°) Longitudinal belt TP16 Super-finisher SF/3250, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 6°) Scotch-Brite SB180 (Kw 1,5) diam. mm 180 7°) Rotary air-jet blowers for the panels cleaning SR

Condition: used, Year of construction: 1995, Used Machine Year of manufacture: 1995 Features and technical data: - Total pressing force: 70 t - Press area: 2500x1300 mm - With gold anodized plates in good condition - Press chamber height: 400 mm - 4 cylinders, diameter 80 mm - ABS safety system, can be deactivated - Emergency cord - Extendable support, left side - Swivel button operation - Hydraulic unit at the bottom - Cleaned and assembled/pressed by ELKOM staff Dimensions: 2900 x 1480 x 2050 mm Iajdjx Enr Sepfx Ah Nsl Weight: 2950 kg Availability: short-term Storage location: 63934 Röllbach

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5200x1650x2250 mm Weight 9000 kg Isdpev A Hmkefx Ah Nsal Total power requirement 45 kw

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric heating plate bottom: defective plate surface: ALU - anodized Iaedpfx Ahox Edl Eo Nel pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: ready for operation (used), Year of construction: 1996, pressing force: 70 t, Main Drive Pressing force 686 Kn This OTT ST 1611/60 veneer press was manufactured in 1996. It features a maximum pressing force of 70 tons, pressing plates measuring 1300x1611 mm, and a power output of 10.1 kW. The plates are electrically heated, enhancing its efficiency. Consider the opportunity to buy this OTT ST 1611/60 veneer press. Contact us for more information. Isdpfx Asx D D Nnjh Nsal Application Types Pressing / Laminating

Condition: used, Veneer Press BÜRKLE U 80 - used - Emergency stop cable, Control via push button Iedpfjxfg A Hox Ah Nsal ----- Technical Data ----- Pressing area: 2,550 x 1,300 mm Power per heating plate: 9,100 W Max. opening height: 4,000 mm Number of cylinders: 6 pcs. Dimensions (LxWxH): 3,150 x 1,450 x 1,785 mm Weight: 3,700 kg

Condition: used, Year of construction: 2024, Version: Joos A.B.S. safety system to protect the heating plates in case of incorrect loading or parts left behind. The press is open on all sides, features a robust all-steel construction, and is protected against overload. The maintenance-free hydraulic system is integrated into the oil tank. Step-less pressure adjustment is performed according to a clear pressure diagram. Once the set pressure is reached, the system switches off automatically. Constant pressure is maintained throughout the entire pressing process. The rack-and-pinion guide ensures stable parallel travel of the pressing plates. The press is optimally suited for laminating flat surfaces using adhesives, provided the corresponding technical requirements are met. Technical Data: - Max. pressing force: 1200 kN - Adjustment range: 10 – 100% - Total pressing area: 3100 x 1350 mm - Specific pressure at full capacity: 3.0 daN/cm² (kg/cm²) - 6 cylinders, 80 mm diameter, 400 mm stroke - Hydraulic working pressure: 398 bar - Press room height: 400 mm - Color: Light grey, RAL 7035 Hydraulics: The following components are integrated into the press's hydraulic system: - 1 oil-hydraulic two-stage high-pressure pump - 1 three-phase motor, 2.2 kW - 1 automatic pressure switch - 1 change-over valve - 1 pressure diagram The hydraulic unit is built into the lower section of the press. Controls: Automatic pressure control via electronic controller with setpoint and actual value display. Operation is performed via a clear control panel. The control cabinet is fully integrated lengthwise in the upper section of the press. Operating voltage: 400 V, 50 Hz, 3-phase. ELECTRIC HEATING PLATE 3100 x 1350, GOLD ANODIZED One lower and one upper electric heating plate, 3100 x 1350 mm. The surfaces are anodized, making them extremely hard, scratch- and abrasion-resistant. High-temperature insulation between the heating plate and the press table. Maximum operating temperature: 120°C. (1 section / 2 heating plates.) TEMPERATURE CONTROL Temperature control R 1.1; each heating plate features an electronic temperature controller and a safety temperature limiter around the edge of the heating plate. SWIVEL PANEL OPERATION Iaedpfxoxplbcj Ah Nsl Operation is via an ergonomic swivel panel control. Location: Rieth

Condition: used, Year of construction: 1985, Used machine Year of manufacture: 1991 Plate size: 2200 x 1100 mm Equipped with Busse aluminium energy-saving plates (the spots visible in the pictures are only visual; the plates are in perfect condition) Total press capacity: 80 t Press cylinders: 4 x 90 mm Opening width: 400 mm Weight: approx. 3100 kg Total length: 2610 mm Total width: 1240 mm Total height: 1890 mm Iedpfx Aex Enp Roh Noal Motor power rating: 1.1 kW Connection per electric heating plate: approx. 6.6 kW Availability: short notice Storage location: Röllbach

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4300x1650x2520 mm Iaodsv A Hlyepfx Ah Njl Weight 7900 kg Total power requirement 108 kw

Condition: like new (used), shelf length 3000 mm; shelf width 1300 mm; water heating; 6 hydraulic cylinders; piston diameter 70 mm; new Teflon films on the shelves Ijdpfx Ahox Hwnfe Noal

Condition: ready for operation (used), Year of construction: 1996, Main Drive Pressing force 135 Kn This OTT 300-K-D0 was manufactured in 1996. A robust veneer press featuring plate dimensions of 2550 x 1350 mm and hot water heating. It includes 6 pressure cylinders with a total pressing force of 135 tons. Consider the opportunity to buy this OTT 300-K-D0 veneer press. Contact us for more information about this machine. Ijdpox D E Avofx Ah Nsal Application Types Pressing / Laminating

Condition: good (used), Year of construction: 1975, Veneer press - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5500 kg - Electrically heated platen, no dents - HP 120 - Press area height: 400 mm - 6 cylinders Iajdpfxsx Akuze Ah Nel - Rack and pinion guide

Condition: used, Year of construction: 1984, total width: 1,500 mm, total length: 3,000 mm, total height: 2,000 mm, Empty weight: 2.500 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Max. workpiece length [mm]: 2500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 300 - Number of work zones [pcs]: 1 - Number of cylinders [pcs]: 4 Ijdpfxsxhcg Ts Ah Neal - Cylinder diameter [mm]: 70 - Transport dimensions: 3000mm x 1500mm x 2000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical details: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamps Rear stop Ijdpfx Ajw I Ulpsh Nsal Weight approx. kg: 400 Location: Flörsheim Availability: short notice

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2150 mm Weight 7500 kg Total power requirement 54 kw Iodev A Hlgopfx Ah Njal

Condition: ready for operation (used), Year of construction: 2023, This ORMA NPC/DIGIT 6/95 30/13 AS-BO was manufactured in 2023. A used hot press, it features a press area of 3000x1300 mm, six cylinders, and a maximum press opening of 400 mm. It delivers a total pressure of 90 tons and includes an 18 kW electro-heater for thermo-oil heating up to 120°C. Consider the opportunity to buy this ORMA NPC/DIGIT 6/95 30/13 AS-BO veneer press. Contact us for more information about this machine. Application Types Iaedpfxsx D Ngls Ah Nol Pressing / Laminating

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Iaedpfxewi Adko Ah Nsl Equipment and technical data: Working length: 3000 mm Handwheel clamping Unit: 2 kW Availability: Short-term Location: Flörsheim

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3940x1620x2130 mm Weight 5760 kg Total power requirement 32,5 kw Iajdpfx Aev A Hlaoh Nol

Condition: used, Used machine Veneer splicing machine Machine number: 1262050 Motor power: 2.5 HP Motor speed: 2,810 rpm Cutting length: 3,100 mm Saw blade diameter: 180 mm Rear support plate missing Movable Iaodpfx Ahowka I Nj Nsl Transport dimensions approx. 3,700 × 700 × 1,450 mm Weight approx. 200 kg Availability: short notice Location: Solingen

Condition: used, Used machine Condition: Fully functional Technical data: Iaedpfxsw I U Evs Ah Njl Working length: 3000 mm Handwheel clamping Power unit: 2 kW Availability: Short term Location: Flörsheim

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Tabletop machine The zig-zag thread used as the adhesive medium is applied from below Automatic thickness and tolerance compensation for measured veneers Veneer from approx. 120 mm length, 35 mm width and a thickness of 0.3 - 2 mm Electrical connection: 230 V Throat depth: 700 mm Material feed approx. 6 m/min. Ijdpjw I Ur Nofx Ah Neal Weight: approx. 54 kg Availability: short-term Storage location: Flörsheim