Used Veneer Clipper for sale (566)

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Kedpeya I Iuofx Abfslu Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: like new (used), gluing machine for thread with adhesive zigzag stitching air-blown heating element Kodpfx Aex U Dhzjbfslu pedal control 380V power supply

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Kljdpfxomb U A Io Abfou Technology data: Cutting length: 2100 mm Extra knife included Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Condition: excellent (used), functionality: fully functional, Shelf length 3500 mm Shelf width 1300 mm New aluminium shelves 6 hydraulic cylinders Piston diameter 70 mm Water heating Ground clearance 390 mm Safety rupture link Year 1999 Weight 4400 kg Klsdpfx Abey N Rdrjfju

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, Shelf length: 3000 mm Shelf width: 1300 mm Clearance: 400 mm 6 hydraulic cylinders Kledjy N Rczspfx Abfju Piston diameter: 85 mm Machine control via touch panel Built-in electric oil heating Electric time-controlled opening Safety breakaway cable Year of manufacture: 2025, NEW Control system: logic control Overall dimensions: Length: 360 cm Width: 160 cm Height: 203 cm

Condition: like new (used), functionality: fully functional, - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm - Number of pistons: 6 Kedsy N Rcuepfx Abfolu - Piston diameter: 80mm - Oil heating - Hydraulic side pressure - Emergency stop – pull cord

Condition: ready for operation (used), functionality: fully functional, plate length 3500mm plate width 1300mm two inserts water heating - needs to be connected to heater 8 hydraulic pistons pistons diameter 85mm Kodpsy N Rcnefx Abfslu span between plates max 460mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm plates span 650mm Kedpfx Abey N Rchefslu pressure 3kg/cm2 pump motor power 2,2kW

Condition: like new (used), Thread splicer with glue Zigzag stitching Ksdjy N N Nyjpfx Abfslu Heater with air blowing Pedal control 380V power supply

Condition: as good as new (ex-display), Technical specifications: Kledpfx Abefhqhdofsu Total pressing force max. 800 kN Setting range 10 – 100 % Total pressing surface 3100 x 1300 mm Specific pressure at full charge 2,0 daN/cm² (kg/cm²) 6 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 265 bar Daylight height 400 mm Heating platens: Electric heating platen 3100 x 1300 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Maximum operating temperatures 120°C.

Condition: as good as new (ex-display), - pressing force: 700 kN - pressing surface: 2500 x 1250 mm - medium heated (water) with heating unit max. temperature 85 °C - incl. Joos-A.B.S.-Safety-System to protect the heating platens in case of incorrect loading or forgotten parts Kljdpfewaznjx Abfju

Condition: used, working width 750 mm working length 3.000 mm length ~ 3.850 mm width ~1.000 mm height ~ 2.000 mm Hydraulic veneer press Ott type 300 K75 for gluing veneers, timbers, beams or other pressing tasks. Heating plates without function. Kledpoy Erymjfx Abfou

Condition: excellent (used), FWM 630 gluing machine Klsdpfx Aboy Emmnsfju

Condition: ready for operation (used), Complete Veneer production line. Kodpfx Aotryf Iebfelu Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer - Veneer peeling system - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, ELECTRO-HYDRAULIC PANEL PRESS WITH OIL BOILER, MOTORIZED FEED, INFEED & OUTFEED TABLES Brand: ORMA Model: LS 25/13 AF BO Serial No.: 69440202 Year: 2002 (Photos taken before overhaul, functional tests & cleaning) Press specifically designed for manufacturing solid wood laminated panels using special adhesives. SPECIFICATIONS: - Heated platens 2500x1300mm by oil circulation at 120°C Opening height (usable stroke): 200 mm Maximum vertical platen pressure: 80 tons (2.5 kg/cm²) Maximum vertical pressure of front cylinders: 40 tons (25 kg/cm²) - Horizontal pressing stroke: 150 mm Adjustable working thickness: 12 to 50 mm Horizontal pressure: 7.5 tons (7 to 10 kg/cm²) CONFIGURATION: - Heavy-duty steel frame - Motorized infeed table 2.50x1.40m with rack-and-pinion pusher - Hydraulic power units 3x 2 HP - Control panel with 2 foot pedals; adjustment for feed/horizontal & vertical working pressure/working temperature/pressing time Pressure gauges for: platen pressure, pusher stop, and locking presser - Mobile lower platen with aluminum surfaces 6 hydraulic cylinders Ø70mm with 4 rack-and-pinion balancing guides - Heated upper/lower circuits (internal coil) 24kW electric boiler with 1.1kW circulation pump - Independent rear locking presser with 3 hydraulic cylinders Ø70mm, double rack guides - Lateral pressers 5 hydraulic cylinders Ø40mm Adjustable feet 70x120mm (height adjustable) - Outfeed roller table length 1.25m - Complete electrical cabinet with all controls - Power supply: 400V, three-phase 50Hz, IN 44A Installed power: 32kW - CE marking Lockable main switch, emergency stop button Kjdpewxdctjfx Abfjlu Emergency stop cable Safety guards Transport dimensions (LxWxH): 3.50x2.40xh.2.00m + 2.40x1.80xh.1.80m (as delivered, packed) Weight: 6200kg + tables

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Working length 2.12m Distance between supports 30cm Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Kledpfxorx S Ucs Abfsu Estimated weight: 300 kgs Functional machine offered without overhaul.

Condition: excellent (used), Catalogue number: 7551 TECHNICAL DATA Veneer thickness: 0.4-2mm Passage width under body: 920mm Foot pedal control Table dimensions: 1250x340mm 2 metal pressure rollers Air requirement: 6 bar Bottom-driven rubber roller 2 smooth, metal drive rollers Motor: 0.55kW Dimensions (L/W/H): 1400x550x1500mm Weight: 205kg – German production – Unpainted Klodpfx Ajx Tpmtsbfsu – DTR documentation – Very good condition – Used stitching machine Net price: 6900 PLN Net price: 1640 EUR, depending on the exchange rate 4.2 EUR (Prices may vary with greater fluctuations)

Condition: used, Year of construction: 1997, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 1997, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Klodpfov Sthgjx Abfeu Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Kjdpfx Abjy A Hkbofjlu Weight: 2600 kg

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Klsdjvxvc Hepfx Abfsu Year 2007. Very good condition. Available immediately.

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Kledpfx Abjy Aplzjfou Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 2911, Depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Kjdpey Iadlefx Abfjlu Weight: 220 kg

Condition: used, Year of construction: 1978, used Manufacturer: Ott Type: JU60 Year of manufacture: 1978 Machine no.: 10838 GS-certified Panel size: 2200 x 1100 mm Maximum opening: 300 mm Tip control Safety rope Electric heating Piston diameter: 80 mm 4 lower pistons Required space approx. 2600 x 1300 x 1900 mm Kedpfx Aoy H N Tgjbfjlu Location: 97447 Gerolzhofen, free loaded, unpacked Transfer as seen, in current condition No warranty or guarantee

Condition: ready for operation (used), functionality: fully functional, power: 2.2 kW (2.99 HP), empty load weight: 350 kg, planing from above, optimal surface quality, processing speed 50 m/min, no need for intermediate sanding, trouble-free machining even of damp wood, maximum working width 250 mm, maximum chip thickness 3/10 mm, clearance height 1-180 mm, tool adjustment 0°-60°, motor power 2.2 kW, weight 350 kg. Ksdpfx Aboy H Hkiofslu

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Cutting length: 3000 mm Saw blade diameter: 180 mm Rear support table Ksdpfsxf Tqwjx Abfslu Weight approx. 300 kg.