Used Veneer Clipper for sale (578)

Condition: used, Year of construction: 1996, Press dimensions: 2550 x 1350 mm Plates: Gold anodized Total pressing force: 80 t Specific pressing pressure: 2.8 - 4.0 kg/cm² Hydraulic cylinders: 4 x 90 mm Opening width and press stroke: 400 mm Safety pull cord Safety frame Button control Total connected load: 19.3 kW Kjdpfoxy Tl Rox Ah Nell Storage location: Supplier

Condition: excellent (used), total width: 1,500 mm, total length: 3,000 mm, Panel press in very good working condition + Grecon finger jointing Kedpfx Ast Uduxeh Nsll

Condition: good (used), pressing force: 95 t, cylinder diameter: 90 mm, plate width: 1,350 mm, Veneer press Joos Type: HP 90 with 2 intermediate plates, stacking automaton and scissor lift table Pressing area: 2,550 x 1,350 mm Working surfaces: 3 pcs. Intermediate plates: 2 pcs. Pressing force: 95 t Piston diameter: 90 mm Specific pressing pressure: 2.75 kg/cm³ Number of cylinders: 4 Heating medium: hot water Total power: 1.3 kW Safety device: emergency cord Dimensions of the press: 3,000 x 1,530 x 2,200 mm Weight of the press: approx. 4 t Elkom heating plates in very good condition Scissor lift table Klodexnqq Hspfx Ah Njl The plates are automatically stacked and thus discharged.

Condition: used, Year of construction: 2003, functionality: fully functional, overall weight: 3,500 kg, pressing force: 60 t, input frequency: 50 Hz, operating temperature: 100 °C, input voltage: 380 V, cylinder diameter: 65 mm, SECOND-HAND UNIVERSAL HOT PRESS FOR VENEER AND SOLID WOOD GLUED PANELS WITH SIDE PRESSURE CYLINDERS ORMA MOD. NPC/L Vertical thrust - Total thrust – 60 tons - Specific pressure – 2 kg/cm2 - Plate dimensions – 2500x1300 mm - Cylinders – 4 - Cylinder diameter – 70 mm - Electric boiler thermal power – 18 kW - Voltage – 400/3/50 Hz Horizontal thrust - Total thrust – 25 tons - Cylinders – 5 - Cylinder diameter - ø 65/40 mm - Operating temperature - 100°C - Weight - 3.5 tons - Power - 21 kW 29 A - Voltage - 380/3/50 Hz - Dimensions - 3100 x 1650 x 1800 mm Kjdsx Rrb Ispfx Ah Nsll - CE standard - Year 2003

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 9,000 kg, pressing force: 240 t, operating temperature: 130 °C, cylinder diameter: 85 mm, SECOND-HAND ORMA NPC/L DIGIT30/13AF-BO (2007) POWERFUL UNIVERSAL PRESS FOR VENEERING, THREE-LAYER PANEL PRODUCTION AND WITH SIDE PRESSURE BLADES FOR WOOD PANEL PRODUCTION Vertical thrust: Klsdsx Rraqjpfx Ah Nsl - Total thrust - 240 tons - Specific pressure - 6.15 kg/cm2 - Plate dimensions - 3000 x 1300 mm - Cylinders - 12 pcs. - Cylinder diameter – 85 mm - Hydraulic unit – 4 kW - Electric boiler thermal power – 18 kW Horizontal thrust: - Total thrust – 30 tons - Cylinders – 6 pcs. - Cylinder diameter – ø 65/40 mm - Operating temperature – 130°C - Weight – 9 tons - Power – 33.6 kW 54 A - Voltage – 400/3/50 Hz - Dimensions – 3600x1650x1800 - CE standard - Year 2007

Condition: used, Used machine Features and technical specifications: - Maximum passage width: - at cutting angle 40°: 250 mm - at cutting angle 60°: 165 mm - Maximum passage height: 180 mm - Adjustable cutting angle: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm - Table size: 1150 x 650 mm - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V - With chassis Kedpox Nkudsfx Ah Nsll Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: short notice Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Kodpfx Ahouvdzuj Nell

Condition: used, Year of construction: 1966, functionality: fully functional, machine/vehicle number: 0371, Veneer splicing machine Manufacturer: Kuper Kjdpevk U Thsfx Ah Noll Type: FW 100 Machine No: 0371 Year of manufacture: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Drive: brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space required: 2300 / 800 mm Box dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Condition: good (used), Code: 0062 Klsdpfox I Dwpex Ah Nol Brand: KUPER Model: FW / J 900 Thread splicer for veneer Technical Data Reach mmm 920 Feed 15 mt/min Motor power Kw 0,18 Electrical connection v. 380/50 Total installed power Kw 0,45 Heating 200 watt Compressed air 6 bar Overall dimensions mm 1350 x 580 x 1600 h Weight kg 185

Condition: good (used), Code: 0124 Brand: ORMAMACCHINE Model: P30/3 Kjdpfx Ahex I Az Te Njll Hydraulic cold press for furniture, kitchens, wooden doors, custom-made furniture, composite materials, aluminium, plastics and various materials Technical data: Platen size mm 3000 x 1200 N° 3 hydraulic pistons Opening mm 500 Total thrust ton 15 Motor Hp 1,5 Overall dimensions mm 3300 x 1300 x 2100 h Weight kg 1100

Condition: used, Year of construction: 1961, functionality: fully functional, Maximum log length: 1.8 m Maximum log diameter: 0.8 m Kjdox N Shljpfx Ah Njll

Condition: excellent (used), Veneer splicing machine Model : KUPER FWJ 920 Ksdpstq Ey Tsfx Ah Nsll In very good condition.

Condition: good (used), Code: 0276 Brand: ORMAMACCHINE Model: NPC - CE Standard Hot press for carpentry, furniture, custom-made furnishings, veneering, panels, doors, wooden window frames, composite materials and various - CE Standard Technical data: Working platens dimensions 3000 x 1300 mm Opening between platens 400 mm Kjdpfjx Iu Huox Ah Nsll N° 6 pistons Total thrust 90 ton Platens with coils Platens heating with hot water via boiler complete with circulation pump and expansion tank Motor 2 Hp Overall dimensions mm 4600 x 1600 x 2000 h Weight 3800 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 20MS090000/007, total length: 3,000 mm, type of input current: AC, total width: 2,500 mm, total height: 1,900 mm, overall weight: 1,450 kg, empty load weight: 1,450 kg, working width: 900 mm, compressed air connection: 6 bar, throughput speed: 50 mm/s, Gluing and longitudinal splicing machine Kedpfjw E Rfbex Ah Nsll For 0.4 to 3 mm thickness with direct gluing. With pre-gluing of edges up to 5 mm. Machine used very little, available ex location. Features: - Separate electric motors for chain and glue application - Glue is applied to the edge of the newly inserted veneer strip, increasing the strength of the glued joint - Robust, durable stainless steel conveyor chain with weighing joints - Separate temperature, speed, and pressure adjustment - Quick and easily accessible glue reservoir for fast and simple refilling or cleaning - Multiple heating zones for individual temperature adjustment - Extended service life of glue reservoir due to integrated cooling unit - Infinitely variable feed speed INCLUDES GLUE COOLER Technical specifications: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Veneer moisture content: max. 8 – 12 % Working height: 900 mm Feed speed: 5 – 50 m/min Heating section length: 1000 mm Maximum heating temperature: 250°C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Condition: used, Veneer Press OTT JU 90 -used- Kodpfx Ahewmmrao Njll ----- Technical Specifications ----- Pressing area: 2,550 x 1,350 mm, Power per heating plate: 9100 W, Number of cylinders: 4

Condition: good (used), Code: 0487 Brand: KUPER Model: 630 Thread splicer for veneer with base Technical data: Throat depth mm 630 Thickness of veneers 0,4 - 2 mm Feed speed 7 mt/min Volt 220 single-phase Overall dimensions : mm 950 x 500 x 1180 h Weight kg 95 Kedpfx Asxtat Uoh Njll

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: Kjdpfx Ahswd N Rmo Njll • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm Kledpsg Nn E Nsfx Ah Nol feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Code: 0265 Brand: CASATI Model: TM 3100 - CE Standard Automatic mechanical veneer pack guillotine shear with 1 blade - CE Standard Technical data: Cutting length mm 3050 Cutting height mm 45 Automatic shift register Kjdex H Thnopfx Ah Njll Tilting square for cross cuts Full rear register protection Safety photocells Max rear feed width mm 520 Min rear feed width mm 25 Millimeter counter to read the working cutting Reducer motor Hp 1,5 Power Kw 2 Overall dimensions mm 4100 x 1300 x 1500 h Weight kg 1700

Condition: good (used), Veneer saw, veneer sawing machine, jointing cutting machine, fine cutting machine, fine cutting circular saw Klodpfsb A Hnhox Ah Njl -Cutting length: 3000 mm -with extraction

Condition: used, Used machine Equipment and technical data: - Max. feed-through width: - at cutting angle 40°: 250 mm - at cutting angle 60°: 165 mm - Max. feed-through height: 180 mm - Adjustable cutting angle: 0 - 60° - Feed rate: 75 m/min - Table height: 650 mm - Table size: 1150 x 650 mm Klodpfex H Danox Ah Nol - Blade: 335 x 66 x 8 mm - Motor power: 1.5 kW - Electrical connection: 400 V Dimensions: 1230 x 860 x 1270 mm Weight: 385 kg Availability: approx. end of January 2026 Stock location: North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2001, Veneer Saw Mayer FH2-3520, Precision Cutting Saw with Jointing Unit (Planing Unit) and Veneer Stop Table Robust machine construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and gap-tight cutting of veneer, including thick-cut veneer Max. cutting length: 3,500 mm Saw unit and jointing unit are combined in one assembly, so only one unit needs to be moved. Easy-to-operate saw unit running on linear guides. Rear support table with through-finger stop, adjustable from approx. 2 – 62 cm, with pneumatic clamping and digital display Pneumatic workpiece clamping Saw drive motor: 1.8 kW, milling unit: 1.2 kW Motors can conveniently be switched on at the handle, so they only run when needed. Fine-cut blade equipped with carbide teeth, sharpened Planer head Z4, fitted with new carbide indexable inserts, including spare blades Practical front veneer storage, extendable for the planing unit 100 mm extraction connection with extraction duct CE certification Operating manual On-board tools Kedex Hqtzjpfx Ah Noll Original paintwork, only a few areas touched up Dimensions approx. 5,050 x 1,700 x 1,400 mm (L x W x H). Weight approx. 900 kg. The machine can be demonstrated at our location by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'other offers from this supplier.'

Year of construction: 1992, condition: not inspected (used), Carrying bag machine and double net clipper manufacturer Strapack for apples potatoes 1-5 kg possible, Kedehh Idrjpfx Ah Noll Machine is in very good condition, was only in operation for about 10 years Machine has 4 trolleys, which is an output of about 15 - 20 2 kg bags per minute. Machine is ready for use with all accessories. Machine is completely overhauled, price on request. Also sell spare parts for EW20 EW 10 AND NET CLIPPER UC20 If you are interested, please contact

Condition: good (used), Code: 0263 Brand: MONGUZZI Model: TRC - MP 4200 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy base structure Large heavy presser for ideal clamping of all types of veneer High-quality steel blade with high wear resistance Can be operated in both automatic and manual modes Hydraulic control unit Second control panel for end trimming Automatic rear register with electronic programmer 1500 mm Kedpfx Aex Hfr Soh Nell Cutting length 4300 mm Max register depth 1500 mm Min register depth 25 mm Useful presser opening 80 mm Presser width 360 mm Cutting time 4 sec Safety photocell barriers Power 10 Kw Work surface height 910 mm Overall dimensions : machine mm 5700 x 1300 x 1800 h - Rear register mm 3500 x 2000 x 300 h Weight kg 6500

Condition: used, Year of construction: 1972, functionality: fully functional, pressing force: 240 t, opening width: 150 mm, plate length: 3,300 mm, working height: 900 mm, plate width: 1,400 mm, Automatic Veneer Throughfeed Press Ott Pressomat D 99/240 with 6 cylinders in operational condition: – Heating plate size approx. 3300 x 1400 mm – Total pressing force approx. 240 t – Specific pressing pressure approx. 5 kg/cm² – Number of steel heating plates: 2 pieces – Heating plate thickness approx. 40 mm – Number of hydraulic cylinders: 6 pieces – Piston diameter: 6 x 140 mm – Piston stroke approx. 150 mm – 4-way rack and pinion guide – Working height approx. 900 mm – Plastic Mylar belt – Automatic end-feed loading – Loading station / feed table in front of the press Kljdpex Nr Edjfx Ah Njl – Conveyor belt approx. 7100 x 1420 mm – Pneumatic control – Roller track (disc rollers) in front of/above the loading station – Roller track approx. 2000 x 1400 mm – Disc rollers running in a water bath – Roller conveyor with mobile support feet – Outfeed roller conveyor approx. 3300 x 1400 mm – Hot oil boiler HG 80 for heat transfer oil – Heating capacity approx. 80,000 WE/h – Oil burner for light fuel oil – Year of manufacture: 1972, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Machine is still connected and fully operational – Inspection and test run possible by appointment