Wide belt sander

HEESEMANN FGA for veneer and intermediate sanding

Condition: used, machine/vehicle number: 007984, Max. machining width: 1300 mm Rjdewqdbmjpfx Ahcocf Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: used, Year of construction: 2009, heating capacity: 400 kW (543.85 HP), We offer a biomass boiler from the renowned company Kohlbach. Biomass boiler 400 kW TYPE K 8 – 400 Biomass boiler for bark, wood chips, and sawdust. Complete pump and valve set. Multicyclone Rcedpfx Asx Daw Ushcsf Fuel feed Heat exchanger from 2009 Optional and available at extra cost: Biomass boiler with movable floor and hydraulic pump

Condition: like new (used), Year of construction: 2017, operating hours: 108 h, functionality: fully functional, working width: 1,650 mm, power: 370 kW (503.06 HP), type of input current: three-phase, workpiece height (max.): 160 mm, input frequency: 50 Hz, input voltage: 400 V, workpiece width (max.): 1,650 mm, space requirement length: 7,660 mm, COSTA LEVIGATRICI 1650 CALIBRATOR/SANDING MACHINE This machine is in really new condition with only approximately 100 hours of operation. It is fully functional and operates without any issues. Technical Specifications * Machine Type: Automatic sanding / calibration line * Working Width: 1650 mm * Feed System: Motorized conveyor belt with variable speed control * Working thickness: 3 to 160 mm Lower Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Upper Section: * 3 sanding steel roller units * 1 finishing pad unit * Cleaning system with blowers and brushes Unit Power: * From 18.75 kW up to 75 kW (depending on the unit) Control System: * PLC control with touchscreen interface Safety: * Safety sensors * Emergency stop system Redpfx Ahjyt H Dnecocf

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. Rodpjych Igjfx Ahcscf • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2020, Working width from to 50 x 150 mm Working height from to 20 - 50 mm Rcodpfx Ajyhq Umjhcsf

Year of construction: 2001, condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate Rcsdsi A Ivyjpfx Ahcof WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters

Condition: as good as new (ex-display), Year of construction: 2016, functionality: fully functional, power: 75 kW (101.97 HP), volume flow: 52,000 m³/h, suction capacity: 52,000 m³/h, filter area: 481.7 m², total height: 7,400 mm, total length: 9,800 mm, total width: 2,450 mm, Equipment: CE marking, documentation/manual, Stationary filtration system, VENTIL VENETA brand. Model: PF-JET 495/45. Rjdpfx Ahoy Um Tyocscf

Condition: excellent (used), Year of construction: 2008, Top finish brushing machine Italmeccanica TOP FINISH Rcsdpfx Ahsk Iu Hvscef 6T -2M brushing machine one horizontal shaft two edge pin two rotary

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Rsdox Rdn Tepfx Ahcscf Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, filter area: 160 m², Equipment: documentation/manual, NESTRO Extraction System Year 2022 – Modern Industrial Installation – Top Condition NESTRO Extraction Jet NFHSU 11125, 160 m² filter area, incl. 2x electric diverter valves, excl. spark extinguishing system, year 2022 Description Rcodsywfl Hepfx Ahcjf For sale is a high-quality, modern extraction system from NESTRO Lufttechnik GmbH, built in 2022. The system comes from an industrial environment and is accordingly in a very good, well-maintained condition. Thanks to its recent year of manufacture, it offers the latest technology, high energy efficiency, and state-of-the-art control components. 👉 Ideal for joineries, woodworking, manufacturing businesses, and industrial applications where dust and chips are generated. Key Technical Data (Excerpt) Manufacturer: NESTRO Lufttechnik GmbH Year of manufacture: 2022 Duct diameter: Ø 300 mm Electric diverter valves included Motor power diverter valve: 0.12 kW Operating voltage: 400 V Frequency: 50 Hz Robust industrial design Scope of delivery - Filter plant / filter housing - Fan / negative pressure fan - Control system (incl. modern control components) - Piping and components (as per inventory) - Diverter valves - Steel structure / installation Condition ✔ Year 2022 – very modern condition ✔ The system has been in use and is proven ✔ Well-maintained overall system ✔ Inspection possible any time Special Features ✔ Very recent year of manufacture ✔ Premium manufacturer (NESTRO) ✔ Modern control technology ✔ Energy-efficient and future-proof ✔ Significantly cheaper than comparable new equipment ✔ Ideal for rapid integration into existing operations Important Notes Sale is made in the current condition Dismantling and loading by purchaser Support for dismantling can be organized upon request Sale without warranty Condition / Warranty The machine offered is sold as used equipment. The sale is under exclusion of any liability for material defects. The machine is sold as inspected and without any warranty. The seller does not guarantee functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body or health, or to grossly negligent or intentional behavior by the seller. Dismantling and Transport Dismantling of the machine is the responsibility of the buyer at their own expense and risk. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest when dismantling or loading begins. Other Provisions No liability is accepted for hidden defects. All information on the machine (e.g. year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.