Used Thread Measuring Wire for sale (11,270)

Condition: good (used), Year of construction: 2021, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Dwjdpfx Alezphtuefod

Condition: excellent (used), Year of construction: 2024, operating hours: 1,822 h, functionality: fully functional, machine/vehicle number: P2414C718, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, total height: 1,970 mm, total length: 2,120 mm, total width: 1,970 mm, wire diameter (max.): 0.253 mm, workpiece height (max.): 250 mm, workpiece width (max.): 630 mm, workpiece length (max.): 730 mm, type of input current: AC, table width: 440 mm, overall weight: 2,200 kg, table length: 626 mm, input voltage: 400 V, tank capacity: 520 l, travel speed (max.): 2,000 mm/min, input frequency: 50 Hz, input current: 32 A, positioning accuracy: 0 mm, Equipment: cooling unit, documentation/manual, The machine has undergone a general overhaul, and the water system has been cleaned. The machine is equipped with new, original precision diamond guides (0.253), new feeders, all bearings, cutting contacts, encoder batteries, parameter backups, filters and a detection unit. The system has been updated to the latest version. The machine comes with a complete set of standard accessories: flushing nozzles, wire alignment jig, clamps, etc. Dsdo Ahhn Iopfx Alfjwd

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: MV2400R, workpiece weight (max.): 1,500 kg, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 305 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, type of input current: three-phase, table width: 640 mm, overall weight: 3,850 kg, table length: 840 mm, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 310 mm, input voltage: 220 V, input frequency: 50 Hz, input current: 35 A, Equipment: cooling unit, documentation/manual, Technical Specifications – Mitsubishi Electric MV2400R Control Unit Dwsdpez Sp Udsfx Alfed Control System Manufacturer: Mitsubishi Axis Strokes Number of axes: 3 Technical Features Maximum taper angle: 15° / 260 mm Required compressed air: 0.5 MPa, 75 l/min PC technology with a 15-inch color LCD touchscreen and mouse Electronic hand-held control unit Support for 2D/3D CAM processing Graphical verification of machining Machine Capacity Max. taper angle 15° / 260 mm Machine Description This 3-axis wire EDM machine, Mitsubishi Electric MV2400R, was manufactured in 2013. It is equipped with a PC control unit featuring a 15-inch LCD touchscreen and supports 2D/3D CAM and graphical verification of machining. Condition The machine is still connected to the power supply and energized.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 Dwsdez Ebzbepfx Alfod The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: good (used), functionality: fully functional, GWR 80 thread rolling machine. Dedpo Ahmviefx Alfewd

Condition: used, functionality: fully functional, machine/vehicle number: MK-258001, Endress+Hauser CA72TOC TOC Analyzer – Online Water Quality Analyzer For sale: a complete Endress+Hauser CA72TOC online TOC analyzer for continuous measurement of the Total Organic Carbon (TOC) content in water streams. This industrial analysis cabinet is suitable for applications in water treatment, wastewater treatment, drinking water production, and various process industries. Complete industrial analysis cabinet for continuous measurement of Total Organic Carbon (TOC) in water streams. Equipped with integrated control, sampling unit, and pump system. Ideal for applications in water treatment, wastewater treatment, and process engineering. The machine is in good used condition and is available for inspection. The installation consists of an analysis cabinet with integrated control, sampling/analysis unit, and associated pumps. Thanks to its robust industrial design, this analyzer is suitable for permanent process monitoring and quality control. Technical specifications: Manufacturer: Endress+Hauser Model: CA72TOC Type: Online TOC Analyzer Identification number: MK-258001 Application: Continuous TOC measurement in water Design: Freestanding analysis cabinet Includes: Control and display module Control cabinet Sampling/analysis unit Pumps and piping Electrical circuits Dsdpfx Aj Ah D D Ielfjwd Applications: Wastewater treatment plants Drinking water production Process water monitoring Industrial water treatment Pharmaceutical industry Chemical industry Environmental monitoring Special features: Industrial design Suitable for continuous online analysis Complete installation including control system Endress+Hauser quality system Ideal for process and quality monitoring

Condition: used, Year of construction: 2020, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 220 mm Dwedpfx Als Ahq Hdjfsd max. workpiece weight: 500 kg with AWF ( Automatic Wire Feeding ) U / V axis: 90 x 90 mm working hours approx: 5973 h - Fully operational - Wire diameter: 0.10–0.30 mm - Maximum wire feed speed: 420 mm/s - Maximum wire spool size: 8 kg - Wire tension: 3–23 N - Maximum cutting angle: ±15° at 120 mm workpiece height - Floor-to-table distance: 900 mm - Work tank dimensions: 860 × 690 mm - Machine dimensions: 2,020 × 2,310 × 1,990 mm - Machine weight: approx. 2,750 kg - Power supply: 11 kVA, 3-phase, 50/60 Hz

Condition: used, Year of construction: 2013, machine/vehicle number: 20130207F, with measuring table, dimensions: 6000 x 3000 mm, table plate weight: approx. 13,500 kg, measuring probe, manufacturer: RENISHAW. Dwedpfe Af Nivox Alfjd

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 111288, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 1,200 kg, total height: 2,930 mm, type of input current: AC, total width: 1,525 mm, total length: 1,740 mm, overall weight: 3,500 kg, table width: 925 mm, table height: 720 mm, table length: 1,195 mm, table load: 1,200 kg, compressed air connection: 6 bar, ambient temperature (max.): 35 °C, ambient temperature (min.): 10 °C, Equipment: type plate available, # Advertisement Description – ZEISS MPS PRISMO 7/9/5 For sale is a used ZEISS MPS PRISMO 7/9/5 3D coordinate measuring machine. The machine was manufactured in 2000 and has the serial number 111288. It is equipped with a ZEISS VAST probing system and a multi-probe changer. # Technical Data * Manufacturer: ZEISS * Model: MPS PRISMO 7/9/5 * Series: PRISMO * Year of Manufacture: 2000 * Serial Number: 111288 * Measuring Range X-axis: 700 mm * Measuring Range Y-axis: 900 mm * Measuring Range Z-axis: 500 mm * Probing System: ZEISS VAST Dodezwu Aljpfx Alfowd * Multi-probe changer included * Machine-mounted operator console included * Condition: used # Optional In addition to the machine, it is possible to purchase a separate cabinet with an extensive collection of ZEISS probes and accessories. The cabinet is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe collection can be provided upon request. # ZEISS Service and Test Label The machine has a label from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to a test performed according to DIN EN ISO 10360. The following values are indicated on the label: * MPE(E0): 1.40 + L/350 * P: 1.20 * THP: 1.40 * TAU: 29.00 * Type: PRISMO * Serial Number: 111288 * Label: 2025-10 The stated values are reproduced according to the ZEISS label on the machine. # Condition and Inspection The machine is in used condition. An inspection is possible by prior arrangement. Subject to errors, changes, and prior sale. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Dodpo Aa Ii Usfx Alfewd Price: EUR 23,000.00 plus VAT, ex works

Condition: good (used), Year of construction: 1998, functionality: fully functional, PLEASE NOTE: If you purchase on August 10, 2026, or August 11, 2026, you will receive an additional discount. Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 Max. wire diameter: 12 mm Max. wire cross-section: 115 mm Max. ejector length: 90 mm Max. ejector on the punch side: 20 mm Motor: approx. 15 kW Max. output: 160 pieces/min, depending on the part to be produced Station 3: optional deburring or forming Press Biauli BF17B, year of manufacture 1998, 13 tons Oil pan: 424 kg Conveyor belt: 199 kg Djdpfx Aszd Da Hslfjwd Control cabinet: 205 kg Platform: 186 kg Machine parts/accessories: 565 kg We sell the above items with the exclusion of any warranty for defects in materials and workmanship and without guaranteeing functionality or dimensional accuracy. We are not aware of any major defects, and the machine has functioned perfectly until recently.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Travel range X-axis: 440 mm Travel range Y-axis: 500 mm Travel range Z-axis: 410 mm Max. workpiece weight: 227 kg Dwodpfx Alo Afhtqofsd Table height: 930 mm MACHINE DETAILS Last overhaul: 2025 Last calibration and maintenance: 09/09/2025 Calibration and measurement protocols: available Operating manual: available on CD Dimensions & Weight Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm Total weight: 293 kg Input voltage: 220 V Input current type: Alternating current (AC) EQUIPMENT PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable Renishaw MH20i measuring head with TP-ES probe system EM1 extension module, length: 70 mm TP20 SF probe module with standard probing force TP20 EF probe module with high probing force Functional HP computer Additional Renishaw Brown & Sharpe TP-ES measuring head, functional Several probe extensions Various probe tips The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.

Condition: used, Year of construction: 1991, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: 3D coordinate measuring machine Condition: good Machine weight: approx. 1.6 t Measuring table Table length: 1,500 mm Table width: 1,000 mm Through-passage: 800 mm Measuring ranges Measuring range X: 1,400 mm Measuring range Y: 1,000 mm Measuring range Z: 800 mm Dimensions Space requirement: approx. 2.0 × 1.8 × 2.1 m EQUIPMENT Finely ground measuring plate made of gray cast iron with T-slots ZETT measuring and evaluation computer EPSON evaluation printer with temperature stabilization heater Device for television transmission of microscope images Dwsdpo Aa Nnxjfx Alfjd Cold light source with 2 flexible fiber optic light guides Sony Mavica video printer

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Djdpfx Alo Afhr Tofswd Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: used, Year of construction: 2016, weight of the machine ca. 5200 kg Dode Ahklmjpfx Alfswd

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 2 kg, Equipment: documentation/manual, RENISHAW OMP 60 3D probe, SK40 OMP60 probe – used Compact 3D probe The optical signal transmission allows for the direct setup and inspection of workpieces on the machine and the transmission of the signal. Possible applications for the probe system include medium and large machining centers; compatible with all optical receivers from Renishaw. Switching methods for the probe can be adjusted. Factory setting: Optical On/Optical Off. Probe stylus, l = 100 mm, Probe ball, Ø 5.0 – ruby ball Mount for OMI-2 receiver – interface Protective sleeve and connector for the cable from the receiving unit Diameter 60 mm Battery compartment Weight approx. 1.54 kg Dwodpfx Aeznk I Selfod Operating manual for the OMP60 probe is available in printed form and on CD-ROM Made in UK RENISHAW OMI-2 transmitter/receiver OMM with connection cable Machine interface MI12 Honda Tool holder SK 40 Price negotiable Our asking price is €3,390 net, ex works, plus packaging costs. Subject to technical changes and errors. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 2009, Mahr MarSurf CD 120 Contour and Roughness Measuring Instrument, Surface Measuring Instrument Measuring range: 120mm Measuring force adjustable from 2 mN to 120 mN Mahr ST 500 measuring stand Year of manufacture: 2009 Accessories: Contour measuring probe: Mahr PCV probe arm 350 Roughness measuring probe (software license for roughness measurement has expired) Mahr calibration standard Dsdpfx Alozmtlqjfjwd Mahr cross slide table You are welcome to come and inspect the equipment. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT identification number is available. Subject to prior sale. Visit our shop and see our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Dwodpfx Aezwvk Rjlfed Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: new, Year of construction: 2025, Equipment: documentation/manual, High-quality Emerson Micro Motion Coriolis mass flow measurement system, manufactured in 2025, supplied with a Micro Motion 2700 transmitter. The equipment appears unused and is stored in protective packaging inside a wooden transport crate. Designed for industrial applications requiring accurate mass flow and density measurement. The Coriolis measuring principle enables direct mass flow measurement without the need for moving mechanical measuring parts. Technical specifications • Manufacturer: Emerson / Micro Motion • Equipment: Coriolis Mass Flow Meter • Sensor model: CMFHC2M451N2EZDZZZ • Transmitter model: 2700R15CEFDZWZ • Sensor serial number: 13808772 • Transmitter serial number: 19028494 • Year of manufacture: 2025 • MID certificate number: TC7056 • Maximum pressure: 19 bar at 25°C • Pressure rating: PS 14 bar at TS 204°C • Fluid temperature range: -196°C to +204°C • Fluid group: 1 • ATEX marking: See original equipment nameplates • Country of manufacture: The Netherlands • Process connections: Flanged • Sensor and transmitter marked "MID Step 1 Passed" Features • Direct mass flow measurement using Coriolis technology • Density measurement capability • Robust industrial sensor construction • Emerson Micro Motion 2700 electronic transmitter • Suitable for demanding industrial process environments, subject to process compatibility • MID and ATEX markings on the equipment • Supplied with associated accessories as shown in the photographs Condition and delivery The equipment is in very clean visual condition and is stored in its protective wooden transport crate. The photographs show the actual equipment offered for sale, including the sensor assembly, transmitter, identification plates, connection flanges, and accessories. Operating condition and calibration status have not been independently verified. Scope of delivery: Equipment and accessories as shown in the photographs. Inspection by appointment is possible. Additional technical information and photographs are available upon request. Please contact us for pricing, availability, and shipping options. Additional Information Technical documentation and operating instructions are available. Please contact us for additional information, technical specifications, pictures, or a quotation. Dsdj Aitycjpfx Alfswd Price & Delivery Information Price: On Request Please contact us with your required quantity for a quotation. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Surplus stock – sold as is, where is, without warranty, claims, or returns.

Condition: used, Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781 Serial-No. 8170126 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Dwjdpfx Alo Aikkljfsd Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: like new (used), Year of construction: 2018, Technical data: Travel ranges (X/Y): 300 / 200 mm Travel range (Z): 350 mm Diagonal travel range (W): 200 mm Dwodo Afbykspfx Alfjd Table size: 350 x 250 mm Max. workpiece height: 180 mm Max. workpiece weight: 150 kg Electrode diameter: 0.2 – 3.0 mm Dimensions (length x width x height): approx. 1100 x 1100 x 2000 mm Machine weight: approx. 0.6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: unexamined, Equipment: documentation/manual, type plate available, For sale is a comprehensively equipped KEYENCE VL series optical 3D coordinate measuring system for non-contact, three-dimensional acquisition and precise measurement of components. The system offered consists of several original KEYENCE system components and is offered as a complete package including extensive accessories, a calibration board, software data carriers, and original documentation. Existing KEYENCE system components: KEYENCE VL-770 KEYENCE VL-750 KEYENCE VL-700 KEYENCE OP-88145 – VL Series Calibration Board including the corresponding transport case Further scope of delivery and accessories: Light/shielding hood Original KEYENCE calibration board with transport case Software data carrier for the KEYENCE VL-700 Series Application Dodo Agnf Aopfx Alfowd Connection and cabling Extensive original documentation and technical documentation Software and license documentation Documentation for additional KEYENCE software modules, including: VL-H3R – CAD Conversion Software VL-H3G – GD&T Measurement Software Further accessories as shown in the images Functional demonstration The KEYENCE measuring system was switched on, and the corresponding KEYENCE VL-700 series application was started for demonstration purposes. The corresponding photos show the switched-on system and the running software interface. Important note: The notebook visible in some of the pictures is used solely for demonstrating the KEYENCE software and the measuring system. The notebook is explicitly NOT part of the offer and is NOT included in the scope of delivery. No binding statement can be made regarding the current calibration status and a complete metrological inspection of the system. Condition The offered KEYENCE 3D coordinate measuring system is in used, overall visually good condition. Signs of wear and tear due to age and use may be present. The exact condition and the complete scope of delivery can be seen in the attached pictures. Inspection and collection Due to the size, weight, and sensitivity of the measuring system, collection is preferred.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, total height: 2,100 mm, total length: 1,000 mm, total width: 1,000 mm, table width: 300 mm, overall weight: 900 kg, table length: 600 mm, table load: 200 kg, Equipment: cooling unit, documentation/manual, Machine in working order. Dsdpo Ahqybjfx Alfewd

Condition: good (used), Year of construction: 2008, Ref. -No.: 10533 Manufacturer: COORD3 Dwedpfe Ahmuzjx Alfjd Type: MCT Star Ligth 30 20 20 Year of construction: 2008 Type of control: CNC-Steuerung Control: CNC Storage location: Halberstadt Country of origin: Italy Machine weight: 5600 kg X-Axis: 3000 mm Y-Axis: 1500 mm Z-Axis: 1000 mm CMM Pressure: 0,42 MPa Further information: The machine can be viewed under power by arrangement.

Condition: good (used), machine/vehicle number: Machine No.: 2 6108 031, WAFIOS R 31 Wire Straightening and Cutting Machine | Decoiler | Omron Control | Tooling | Complete Production Cell Complete Wire Straightening and Cutting System WAFIOS R 31 wire straightening and cutting machine | Wire decoiler / pay-off unit | Omron operator panel | Long material handling system | Extensive tooling | Safety enclosure For sale: a complete used WAFIOS R 31 wire straightening and cutting machine with peripheral equipment and extensive tooling. Dodpfx As Abal Rolfjwd The machine is designed for straightening and cutting wire supplied from coils and is offered as a complete production cell, including the decoiler, wire processing equipment, long finished-part collection system, control equipment, tooling and safety guarding. The system consists of: • WAFIOS R 31 wire straightening and cutting machine • Wire decoiler / pay-off unit • Wire feeding and guiding system • Wire straightening section • Cutting system • Long finished-part handling / collection system • Omron operator panel • Digital weighing system • Electrical control cabinet • Dedicated tooling and accessories • Tool storage cabinet • Safety fencing and access gates • Emergency stop and safety system Technical Specifications • Manufacturer: WAFIOS • Model / Type: R 31 • Machine type: Wire straightening and cutting machine • Machine No.: 2 6108 031 • Operator interface: Omron • Wire supply: Coil / decoiler system • Integrated digital weighing equipment Equipment Included • Wire decoiler / pay-off system • Wire feeding equipment • Straightening and cutting equipment • Long material support and finished-part collection system • Omron operator panel • Digital weighing equipment • Electrical control cabinet • Extensive set of dedicated tooling • Straightening dies and rollers • Wire guides and bushings • Cutting tooling • Tool storage cabinet • Safety fencing around the production cell • Supporting frames and accessories shown in the photos Tooling The machine is offered with a substantial set of dedicated tooling and spare tooling components. The photos show multiple straightening dies, rollers, guides, bushings, cutting components and other machine-specific accessories stored in dedicated drawers. Technical Condition Used industrial machine from a production environment. The machine is installed as a complete production cell together with its peripheral equipment, material handling system and safety guarding. The machine is offered with the tooling, accessories and additional equipment shown in the photos. Additional Information • Complete production cell available • Wire decoiler / pay-off unit included • Long finished-part handling system included • Extensive dedicated tooling included as shown in the photos • Digital weighing equipment included • Safety fencing included • Inspection available by appointment • Sale due to plant closure • All de-installation, loading and removal costs are the buyer’s responsibility