Used Measuring Microscope for sale (6,531)

Condition: used, Year of construction: 2025, OPTICAL MEASURING MICROSCOPE SINOWON iMS-3020C Optical measuring microscope with image processing (2.5D), manufactured in , a used machine in excellent condition for precise optical measuring tasks. Measuring range 300 x 200 x 200 mm, operation via a PC workstation with measuring software. TECHNICAL DATA - Manufacturer / Model: Sinowon iMS-3020C - Year of manufacture: - Design: optical measuring system with camera (2.5D image processing) - Measuring range X/Y/Z: 300 x 200 x 200 mm - Control: PC-based (image processing) - Software: Measuring software on PC workstation SCOPE OF DELIVERY Included in the scope of delivery: - Machine with camera and lighting unit - PC workstation with monitor and measuring software Not included: - Commissioning - Training / Instruction - Transport CONDITION Used machine, year of manufacture . The machine was photographed during operation, and the measuring software was running. Known defects: none documented. Inspection possible by arrangement. Bsdpfx Aks Agckvsneww PROCESSING Inspection possible by arrangement at the Leonberg location. We will handle dismantling and loading; transport available upon request. ABOUT KMT Kneissl Messtechnik is a specialist in industrial measuring technology – used machines with personal consultation, DAkkS calibration service, and optional instruction and installation.

Condition: used, functionality: unexamined, input voltage: 220 V, Used Leitz Wetzlar Measuring microscope setup (UWM) with external XY readout and power supply for lighting. Manufacturer: Ernst Leitz GMBH Wetzlar Movement possibility on X and Y axis, and adjustable in height. Camera can be added on top for making recordings. Bsdpfx Akowm Hqcsnsww Digital readout X and Y axis by means of Sony Magnescale LH31A-2

Condition: new, Year of construction: 2015, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 57 mm, measuring range Y-axis: 41 mm, measuring range Z-axis: 30 mm, total width: 240 mm, total length: 330 mm, total height: 720 mm, HITEC - Measurement Technology QCM 570 Exhibition machine, as new condition Year of manufacture: 2015 (RRP €27,000.00) - For highly accurate, repeatable measurements of complex workpieces - Various telecentric lenses - Camera system: USB 3.0 / 5 Megapixels - Automatic part program recognition Bsdpfsyvur Tex Aknjww M3 Software: - 23″ touchscreen - Flexible probe library, tolerance and programming functions - Visual display of Pass/Fail results with trend indication - CAD export Measuring range / field of view: 57 x 42 mm Length measurement deviation: 4.5 µm + L/50 (L in mm) Camera system: USB 3.0 / 5 Megapixels Incident light: 4-segment LED ring light Transmitted light: LED Height adjustment: 30 mm The measuring system can be inspected at any time at the Chemnitz location.

Condition: ready for operation (used), X-axis: 300mm, y-axis: 200mm, z-axis: 200mm, working distance: 77mm, max. workpiece height: 200mm, max. workpiece weight: 20kg, length: 730mm, width: 900mm, height: 950mm, weight: 125kg, optical length measurement error (2D): 2.9 + L/100µm (L in mm) at 20°C ±1K, tactile length measurement error (MM2/TP20): 4 + L/75µm (L in mm), optical lens: 1.5x, screen magnification: 47-80x, field of view: 4.5x3.5mm, camera: 1.3 megapixel CMOS with autofocus. Equipment: 3-axis CNC control via servo drives and joystick, IK 5000 measuring software, IK 5000 measuring computer for 2D and 3D geometric measurements, integrated CAD module for DXF and IGES data, automatic fit routine for comparison of freeform contours, scaling routine, tolerance inspection according to DIN ISO 1101, data export to Microsoft Office or to databases/SPC/QS systems via ODBC interface, report generator for user-defined measuring tasks, storage of executed actions as measuring macros. An on-site inspection is possible. Bodpfszc Rdwex Aknjww

Condition: ready for operation (used), Keyence IM 6020 Digital measuring projector Measuring microscope Microscope Keyence IM 6020 Bedpfxjunhq Rj Aknsww Keyence IM 6000 You are welcome to visit us for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Bedpfx Aot T Uavjkneww

Condition: refurbished (used), Year of construction: 2025, operating hours: 12 h, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 15 kg, warranty duration: 12 months, total height: 2,000 mm, type of input current: AC, total width: 1,000 mm, total length: 800 mm, overall weight: 800 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 400 Multisensor Measuring Device equipped with camera and Renishaw touch probe system Fully functional with factory acceptance before delivery! Comprehensive maintenance history Measuring range: 400x200x200 mm Maximum workpiece weight (glass plate): 15 kg Instrument weight: 800 kg Control cabinet weight: 90 kg External dimensions: 800x1000x2000 mm Maximum traverse speed: 150 mm/s Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L = measurement length in mm) Factory-refurbished premium multisensor measuring center with warranty and guarantee, rebuilt 2025. Includes the latest software update for Windows 10 (Windows 11 upgrade and OptiCheck3D 2025 available as options), including free lifetime software hotline and user support. Optional: Delivery via factory service or forwarding agent, worldwide. Optional: On-site commissioning & calibration Optional: Training service Online and on-site demos available with customer parts, application consulting by accredited Profitech metrology laboratories during project planning. Available complete service: – Delivery, installation, commissioning, acceptance according to standards, certification, and comprehensive acceptance documentation. Individual training and education programs also bookable as online courses. Creation of your measuring programs for direct operation with the device is also possible. Bjdpfjw Slafex Aknjww Rental, lease-purchase, or financing possible directly via Profitech without any financial institution. The measuring device can be individually configured to customer requirements (within the EU). Reference number: 01814-1-ms400 (Please always include this with inquiries)

Condition: good (used), Measuring microscope, universal workshop measuring microscope, microscope -Manufacturer: Leitz Wetzlar, universal workshop measuring microscope -Reading accuracy: see photos -Dimension assembled: 255/245/H470 mm Bwsdpsh Tadpofx Aknjw -Quantity: 1 pieces available -Price per piece -Dimensions transport box: 710/230/H155 mm -Total weight: 35.4 kg/pc.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 400 mm, Equipment: type plate available, Coordinate measuring machine Mitutoyo EURO M 574 in excellent condition for sale. without computer and software year of manufacture: 1998 without PC!!! X - axis 500 mm Y - axis 700mm Z - axis 400 mm resolution: 0.0005 mm Measuring table material Granite Renishaw MH 20i probe head, Granite bed size 850 mm x 1160 mm, length standard: high-precision linear encoder centering microscope: mitutoyo CF-10 fixing and fine adjustment: one-touch air clamp for each axis continuous fine adjustment throughout the entire stroke range of each axis. effective size: 680x1160 workpiece clamping method: threaded insert M8X1.25 workpiece: Dimensions between columns 720 mm, Bwedpfsu E Uzxjx Aknsw maximum height: 480 mm maximum weight: 160 kg without PC Length measurement uncertainty ISO 10360 E = [3.5 + 4.0L/1000] µm in the temperature range of 18 ... 22 °C machine weight: 450/540kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, We offer for sale a professional digital microscope, the KEYENCE VHX-7000, a state-of-the-art device designed for detailed visual inspection, measurement, and analysis of materials and components. Bwodpsz Ng Ntjfx Aknew This microscope is ideal for industrial companies, laboratories, research institutions, quality control departments, and technical universities. 🔍 Main advantages and features: • ✅ High-resolution digital imaging • ✅ Advanced 2D and 3D surface imaging • ✅ Large depth of field and automatic focusing • ✅ Precise measurement of dimensions and surface analysis • ✅ Advanced lighting options and detail enhancement • ✅ Simple and intuitive operation • ✅ Capability for documentation, archiving, and evaluation of results • ✅ Suitable for quality control, research, and development 🏭 Application areas: • Automotive and mechanical engineering • Electrical engineering and electronics • Metallurgy and materials engineering • Quality control and analysis of manufacturing defects • Research, development, and laboratory measurements 📦 Device information: Manufacturer: KEYENCE Model: VHX-7000 Type: Professional digital microscope

Condition: used, Year of construction: 2021, functionality: fully functional, Equipment: type plate available, We are offering this used Keyence VHX-S750E measuring system, manufactured in 2021. Model: VHX-S750E Serial number: 8B120052 Country of origin: Japan Features: • VHX-7000 camera head • Motorized stand • Control panel (Remote Console) Bodpfx Aksz Hipvsnoww • Integrated VHX monitor • Specimen stage • Standard lighting unit • Housing in good condition • No obvious damage 1. Software license available, but not accessible; no USB stick included. 2. No written proof of functionality; the microscope can be tested before purchase. 3. No additional lenses available. 4. No calibration certificates. 5. Manufactured around 2021; originally purchased as new. 6. Includes the original PC/controller in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), For sale: a precision tool microscope from the renowned Japanese company Mitutoyo, model TM-101 (Code No. 176-901). This device is designed for dimensional, shape, profile, surface, and contour inspection in toolrooms, metrology laboratories, and quality control departments. Manufacturer: Mitutoyo Mfg. Co. Ltd., Japan. Type: TM-101. Digital readouts for X and Y axes with ABS and INC functions, preset, data output. Cross-travel measuring table with rotation and adjustment. Lighting functions: Surface, Contour, Main. Power supply: AC 220V, 50–60 Hz, 8 VA. Robust, stable industrial design. Very good condition, complete device, technically sound, ready for use. Ideal for measuring cutting tools, milling cutters, drills, inserts, inspecting precision components, and measuring contours, threads, and the geometry of parts. Bwodpfx Aksz Slcxsnow

Condition: used, This listing is for a Mitutoyo 202TP Vision Measuring System The unit is in full working condition and is ready for immediate release Bwodpjxzgtdofx Aknew The Mitutoyo 202TP Vision Measuring System is a vision measuring machine — a type of optical metrology system that uses high‑resolution imaging and software to measure the dimensions of parts without physical contact. These systems are widely used for precision inspection of components in industries like automotive, electronics, medical devices and precision engineering. Vision measuring systems eliminate many of the errors and limitations of manual microscope measurements by combining controlled lighting, high‑resolution cameras, automatic edge detection, and computer analysis to deliver accurate and repeatable measurements

Condition: used, Year of construction: 1991, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine type: 3D coordinate measuring machine Condition: good Machine weight: approx. 1.6 t Measuring table Table length: 1,500 mm Table width: 1,000 mm Through-passage: 800 mm Measuring ranges Measuring range X: 1,400 mm Measuring range Y: 1,000 mm Measuring range Z: 800 mm Dimensions Space requirement: approx. 2.0 × 1.8 × 2.1 m EQUIPMENT Finely ground measuring plate made of gray cast iron with T-slots ZETT measuring and evaluation computer EPSON evaluation printer with temperature stabilization heater Bwsdpo Aa Nnxofx Aknow Device for television transmission of microscope images Cold light source with 2 flexible fiber optic light guides Sony Mavica video printer

Condition: used, TAMAR Type: FEMET_WI_ID071_TAMAR Optical Microscope PLMIS Optical microscope The TAMAR optical microscope ID071 is used for the optical inspection of samples with a maximum size of approximately 780x650mm2 (substrate size) in the PLG cleanroom. Substrate size: complete substrate size (780x650mm2) Bwodpfxezd Sqmj Aknow Objective: The objective lens focuses the light emanating from the object being observed to create a real image for the viewer. Brightfield mode (BF): The light from the microscope is directed through the objective lens onto the sample. High resolution, low contrast Darkfield mode (DF): Illumination mode for increasing contrast, high contrast for edges and particles. Principle: The center of the incident light beam is blocked; only peripheral light is directed through the objective lens and strikes the sample from the side. Edges and particles appear bright, while the smooth background appears dark. TAMAR optical microscope ID071 X-Y stage Software revision 1.0 Condition: used Scope of delivery: (Autosampler as shown in the picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the fields of research and development. It thus provides an excellent addition to the existing FTIR series, which covers, among other things, the standard laboratory area. AIM-8800 specifications Optics: 15x Cassegrain objective 15x Cassegrain condenser mirror with inlet for purging MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm-1 Type 2 - 5000 - 650 cm-1 Electrically activated aperture XYΘ directional drive. The adjustment of the XY directional increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum adjustment value: 3 µm Bsdpozdyyiofx Akneww Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30 mm Resolution: 1 µm distance Sample thickness: Reflection mode - ≤ 40 mm Transmission mode - ≤ 10 mm Operation via the keyboard of the main unit Selection of the measurement mode / XY stage operation (speed control in 4 steps) / manual focusing / illumination control (Optional) Control via PC Selection of the measurement mode / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture adjustment / aperture preview / measurement position and recording of the aperture setting (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540 mm x H520 mm x 36kg Condition: used Scope of supply: (See picture) (Changes and errors in technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Wild Heerbrugg M3 – professional stereo microscope I am offering a high-quality stereo microscope from the renowned Swiss company Wild Heerbrugg. This device is suitable for use in laboratories, quality control, electronics, jewelry making, watchmaking, and precision work. Bwjdez Sm E Iopfx Aknow Technical specifications: • Manufacturer: Wild Heerbrugg • Model: M3 • Country of manufacture: Switzerland • Binocular head • Focus adjustment • Sturdy laboratory stand • High-quality optics Condition: Used item. Visually in good condition, with normal signs of use. Sold exactly as shown in the photos.

Condition: excellent (used), For sale is a robust measuring instrument from the renowned German company AbaWerk Aschaffenburg. It features a cast iron base and is equipped with two hardened centering pins for securing shafts and cylindrical parts. Ideal for use with tool microscopes, measuring projectors, and in quality control. Technical data: • Manufacturer: AbaWerk Aschaffenburg (Made in Germany) • Pin spacing: approx. 115 mm • Stable, heavy cast iron base – secure mounting • Possibility of rotating the part between the pins • Condition: used, fully functional The instrument is manufactured to industrial standards – its precision and durability make such items highly sought after in metrology and toolmaking. Bwjdpfx Aksz Sldpsnsw

Condition: good (used), Zeiss Primovert Inverted Microscope (Serial Number: 3841010097) Bwjdpfozhidrox Aknow WF 10x/20 eyepieces Zeiss Primo Plan-Achromat 4x/0.10 objective Zeiss Primo Plan-Achromat 10x/0.25 Ph1 objective Zeiss Primo Plan-Achromat 20x/0.30 Ph1 objective Zeiss Primo Plan-Achromat 40x/0.50 Ph1 objective Ph1 / 0.3 phase slider Dust cover

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Machine Type: 3D Coordinate Measuring Machine Machine Weight: approx. 2 t Travel Ranges X-axis travel: 1,600 mm Y-axis travel: 1,000 mm Z-axis travel: 1,300 mm Working Areas Bwsdps Aa Np Njfx Aknew Working area Y-axis: 175–1,210 mm Working area Z-axis: 0–810 mm Baseplate Size of baseplate: 1,500 × 800 × 120 mm Digital Display Digital display: Grundig 3-axis Digimess Dimensions of digital display: 235 × 80 × 130 mm Performance Data Total power consumption: 0.04 kW Dimensions Space requirement: approx. 2.0 × 1.5 × 1.63 m EQUIPMENT Finely scraped cast plate with 4 adjustable feet, 2,000 × 1,500 mm Approx. 20 different probing and measuring styli Stiefelmayer guide system “A”

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Bjdpfxj Afhr Tj Aknoww Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, workpiece weight (max.): 227 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, TECHNICAL DETAILS Travel range X-axis: 440 mm Travel range Y-axis: 500 mm Travel range Z-axis: 410 mm Max. workpiece weight: 227 kg Table height: 930 mm MACHINE DETAILS Last overhaul: 2025 Last calibration and maintenance: 09/09/2025 Calibration and measurement protocols: available Operating manual: available on CD Dimensions & Weight Dimensions (L x W x H): 1,030 x 1,160 x 2,320 mm Total weight: 293 kg Input voltage: 220 V Input current type: Alternating current (AC) EQUIPMENT PC-DMIS Pro for Windows Version 4.2 MR4 Release Software, legally transferable Renishaw MH20i measuring head with TP-ES probe system EM1 extension module, length: 70 mm Bwede Afhtqjpfx Aknew TP20 SF probe module with standard probing force TP20 EF probe module with high probing force Functional HP computer Additional Renishaw Brown & Sharpe TP-ES measuring head, functional Several probe extensions Various probe tips The scope of delivery also includes a TESA Star-i measuring head and a Renishaw MIP measuring head. The TESA Star-i measuring head is defective. The Renishaw MIP measuring head is likely defective. However, the machine itself is equipped with the fully functional and even higher-quality Renishaw MH20i with TP-ES probe system and is therefore immediately ready for use.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 800 mm, total height: 3,000 mm, total width: 1,800 mm, total length: 3,200 mm, overall weight: 4,800 kg, Equipment: documentation/manual, - with RENISHAW PH 10 M probe - including accessories such as measuring tips, test specimens, etc. - including computer, monitors, keyboard and mouse Please note: does not include workbench or office cabinet Collection: the collection has to take place on a fixed date to be confirmed between 13.01. and 14.01.2027. Bwedpfx Ae Ahg Nfsknow FCA D-71364 Winnenden - loading in truck

Condition: ready for operation (used), Tesa Micro-Hite 3D Measuring Device, Coordinate Measuring Machine Travel range: X-axis: 460 mm Y-axis: 510 mm Z-axis: 420 mm Dimensions (machine) Footprint approx.: 1,060 × 870 mm Height: approx. 1,320 mm Load & Weight Max. part weight: 227 kg Net weight machine: approx. 210 kg Accuracy MPE_E (Length measuring deviation): 3+4L/1000 µm (L in mm) MPE_P (Repeatability): 3 µm Accessories: Probe Measuring prisms Tesa USB stick Technical description has been adopted. Bweds Ah Dwaopfx Aknow You are welcome to visit us for an inspection. We can gladly arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the item may occur and are subject to change.

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 200 mm, total height: 850 mm, type of input current: AC, total width: 720 mm, total length: 950 mm, overall weight: 54 kg, input voltage: 230 V, table width: 500 mm, table length: 500 mm, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, KEYENCE VL-570 Optical 3D Coordinate Measuring Machine The VL-570, from Keyence’s VL-500 series, is a 3D measuring machine that measures various shapes from the stripe projection image of the object, which is captured with a black-and-white CMOS camera. The linear light from the light source (stripe projection light) is projected onto the object at an angle using the projection lens. Measurement types that can be performed with the VL-570: 3D measurement, plane measurement, profile measurement, 3D comparison measurement, profile comparison measurement. The basic unit consists of: - VL-500 control unit - VL-550 500mm base - VL-570 measuring head - VL-H2P comparison measurement module - VL-C2 cover - OP-88145 calibration plate Technical data: Repeatability: 2µm Measuring accuracy: 10µm Standard measuring mode (4M mode): 4 million measuring points Fine measuring mode (16M mode): 16 million measuring points Rotation mechanism: 360° Bwodsz Ihkbspfx Aknew Tilt mechanism: 45° Measuring range: Ø500mm x H 200mm User manual and quick start guides are included. New price: €52,350 (net) Upon request, the 3D coordinate measuring machine can be delivered within a 200 km radius of our company headquarters. Delivery costs will be agreed upon separately.