Used Measurement Systems for sale (38,047)

Condition: ready for operation (used), Year of construction: 2024, Formtester Contour measuring station Marsurf 280 CD BG 22 Year of manufacture: 2024 Hsdpfx Ahsyt Ux Tsvjni Measuring range: 280 mm Further data will follow Dismantling and packaging by Mahr technician The machine is packaged and ready for transport This offer is intended exclusively for business customers as defined in §14 of the German Civil Code (BGB)

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Hnjdpfxoyu Nabo Ahvoi Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: excellent (used), functionality: fully functional, Very good leak calibration device in a case. Hnjdpfxsxz R Ape Ahvji

Condition: excellent (used), For sale: Professional ETAS measurement and interface set used for development, testing, and calibration of ECU controllers in the automotive industry. Manufacturer: ETAS Application: R&D, test benches, ECU calibration, INCA / ASAP3 ⸻ Set includes: • ETAS ES891.1 – interface/measurement module (ES800 family) • ETAS ES165.1 – Automotive Ethernet interface • Complete set of original ETAS cables (CAN, FlexRay, Ethernet, interface cables) • Adapters (including F-00K-103-786 – visible in the photos) • Original ETAS documentation • Everything exactly as shown in the photos ⸻ Applications: • ECU data measurement and logging • Calibration of engine and vehicle control units • CAN / FlexRay / Automotive Ethernet communication • Work with ETAS INCA, testing and research environments • Automotive laboratories, R&D departments, technical universities ⸻ Condition: • Equipment in very good technical condition • No mechanical damage • Connectors clean, undamaged Hnedpjyc Iiqjfx Ahvji • Normal, slight signs of use • Devices fully functional

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 62286233, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, total width: 1,303 mm, total length: 776 mm, total height: 1,004 mm, overall weight: 324 kg, workpiece weight (max.): 20 kg, Equipment: documentation/manual, 📏 As New Mitutoyo QV Active 404 CNC Vision Measuring System for Sale – High-Precision, Non-Contact Metrology Upgrade your inspection capabilities with the Mitutoyo QV Active 404, a cutting-edge CNC vision measuring system designed for fast, accurate, and repeatable 2D and 3D non-contact measurements. This used unit offers premium Mitutoyo performance at a cost-effective price—ideal for precision manufacturing, quality control labs, and R&D environments. Condition: Never Used – Still in original crates 🔧 Product Overview – Mitutoyo QV Active 404 The Mitutoyo Quick Vision Active 404 is part of Mitutoyo’s renowned Quick Vision series, combining fast automatic measurement, superior accuracy, and flexible lighting systems. It’s equipped with CNC stage movement, a high-resolution camera, and QVPAK software, providing automated, high-accuracy vision-based inspection in one compact footprint. This machine is still in its original crates and is in as new condition, making it a perfect solution for any business requiring advanced metrology tools without the cost of new equipment. ✅ Key Features of the Mitutoyo QV Active 404 📐 Automatic 3-Axis Measurement (X/Y/Z) with CNC stage 🔍 Non-Contact Vision Measurement – Ideal for fragile or micro-scale parts 🧠 QVPAK Software – Industry-leading metrology software for automated routines, reporting, and part programming 💡 Advanced Illumination System – Includes ring light, coaxial light, and programmable sub-stage lighting 🔧 Motorized Zoom Lens for flexible magnification and measurement precision 🖥️ Real-Time Edge Detection for ultra-precise dimensional analysis 📐 Technical Specifications Measurement Range: X400mm / Y400mm / Z200mm Vision Head Range: 400x400x200mm Size of Stage Glass: 466x480mm Max Stage Loading: 20kg Resolution: 0.1 µm Accuracy (E1): ±(2.5 + 4L/1000) µm Touch Probe Accuracy: (2.4+3L/1000) µm Stage Type: Motorized CNC, granite base Camera: High-resolution digital CCD Lighting System: Multi-source - ring, coaxial, contour Magnification Change System: Zoom optical system with 8 positions Lens System: Motorized zoom Sensor Type: High resolution CMOS colour camera Software: Mitutoyo QVPAK Machine Dimensions: 776x1303x1004mm Weight including Stand: 324kg 🧰 Perfect For Precision component manufacturers Hedpfx Aowqrvlohvoni Aerospace, automotive, medical device inspection Electronics & PCB measurement R&D and dimensional analysis labs Tool & die makers and high-accuracy workshops 📦 What’s Included Used Mitutoyo QV Active 404 CNC Vision Measuring System Machine Stand Work Station Master Ball Stand MCR Attaching Plate Calibration Ring QVPAK Software Dell Computer Wide Screen Monitor Printer Used Mitutoyo QV Active 404 for sale Mitutoyo vision measuring system CNC non-contact measuring machine QVPAK software system Pre-owned Mitutoyo CMM Vision metrology machine UK / EU Mitutoyo Quick Vision Active measuring device Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, For Sale: S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs Hnsdpfxsw Nygnj Ahvoi S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, measuring range X-axis: 254 mm, measuring range Y-axis: 152 mm, measuring range Z-axis: 100 mm, workpiece weight (max.): 45 kg, feed length X-axis: 254 mm, feed length Y-axis: 152 mm, feed length Z-axis: 100 mm, travel distance X-axis: 254 mm, travel distance Y-axis: 152 mm, travel distance Z-axis: 100 mm, input frequency: 50 Hz, S-T Industries Profile Projector 22-2600 – 30" Screen, 5X Magnification | Precision Optical Comparator Now available at Used Machine Tools Ireland Ltd – a high-precision S-T Industries Profile Projector, Model 22-2600, with a large 30" (760mm) viewing screen, Heidenhain Quadra-chek 100 Control and 5X magnification lens, ideal for dimensional inspection in precision manufacturing. Previously used in a medical device company, this optical comparator is in very good condition and has been maintained to the highest standards. S-T Industries Profile Projector 22-2600 | 30" Screen | 5X Magnification | Very Good Condition 🔧 Manufacturer: S-T Industries 📍 Location: Ireland Hnodpfxow Nyfwo Ahvoi 📅 Model: 22-2600 🧰 Condition: Very good – ex-medical device company 📦 Available: Immediately 🛠️ Technical Specifications: Brand: S-T Industries Model Number: 22-2600 Control: Heidenhain Quadra-Chek 100 Screen Size: 30" (760mm) diameter Magnification Lens: 5X Worktable Travel (X-Y): 10" x 6" (254mm x 152mm) Glass Stage Plate: 12" x 8" (305mm x 203mm) Load Capacity: Approx. 45 kg (100 lbs) Screen Rotation: 360° with digital readout Illumination: Surface (Oblique) Illumination – Halogen Profile Illumination – Collimated light with adjustable brightness Focus Travel (Z-Axis): 4" (100mm) Power Supply: 230V / 50Hz Condition: Very good – ex-medical device company Country of Origin: USA Location: Ireland 🧭 Ideal For: Medical device manufacturing Aerospace & precision engineering Tool & die inspection Quality control and dimensional inspection labs S-T Industries Profile Projector for sale Used optical comparator Ireland 30" screen profile projector Precision measuring equipment Dimensional inspection projector 22-2600 comparator S-T Industries 5X magnification projector Used metrology equipment Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2010, 1" image sensor, 6.6 megapixels, CMOS Double telecentric lens Z-axis travel distance 30 mm Hnedpeyriv Rjfx Ahvji Z-stage maximum load 3 kg

Condition: used, Year of construction: 2011, valve dimensional inspection Hnsdpfoyrg E Aox Ahvoi *

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FTB-4PRO-S1-128G, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, type plate available, Features of the FTB-4 Pro: * Quad-core processor * 4 GB RAM * Windows 10 * Color touchscreen display * 1280 x 800 TFT * Diagonal: 256 mm (10.1 inches) Hnodoydv Idjpfx Ahvoi * Internal memory: 128 GB (flash) * Rechargeable Li-ion batteries (optional) * Interfaces: o 1x RJ45 LAN 10/100/1000 Mbit/s o 2x USB 2.0 ports o 1x USB 3.0 port o 1x display port o 1x headphone/microphone jack * Dimensions (H x W x D): 199 mm x 333 mm x 170 mm * Weight (without batteries and modules): 4.6 kg * X-720C-Q1-QUAD-EI-EA – TK-y SM/MM OTDR module * EUI-95 * FTBX-882260-10G 10M to 100G Multi-Service Power Blazer test module * GIGE-Bundle – Option 100 Optical + GigE option * 10GIGE – enables the 10GigE LAN/WAN interface * OTN option pack * OTDR + intelligent Optical Link Mapper base software * iOLM Pro * FP435B-V2-APC – Wireless Analysis Digital Video Inspection Probe, MF Ready * FIPT-400-MF Automated Multi-Fiber Tip UPC for MPO * FID-31 R Fiber Identifier * Including transport case

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 226735, type of input current: AC, input voltage: 230 V, Equipment: type plate available, Qualification, commissioning and troubleshooting – intuitive, flexible, fast High data transfer rates of up to 10 Gbit/s Ethernet and new Power-over-Ethernet applications up to 90 W present entirely new challenges for structured cabling. The NetXpert XG2 offers comprehensive active and passive network testing up to 10 Gbit/s for the qualification, commissioning, and troubleshooting of copper and fiber optic cabling. Featuring the largest touch display in its device class, the NetXpert XG2 guarantees user-friendly operation and a clear presentation of results. At the same time, the NetXpert XG2 ensures maximum reliability of results thanks to the unique combination of up to four different testing methods for analyzing a data link. Flexible, scalable model range – upgradable from 1 to 10 Gbit/s The NetXpert XG2 and XG2-PLUS qualify twisted pair cabling from 1 to 10 Gbit/s. With their unique combination of four measurement methods, these devices verify whether your cabling can support interference-free Ethernet transmission up to 10 Gbit/s. The NetXpert XG2 is available in its base version from 1 Gbit/s and can be upgraded to 10 Gbit/s. The NetXpert XG2-PLUS comes fully equipped to also qualify fiber optic cabling up to 10 Gbit/s. SPECIFICATIONS – ALL VERSIONS Copper Interface 1 x Cat 6A RJ45, replaceable Fiber Interface 2 x SFP slot, 1 - 10 Gbit/s; (SFP modules to be ordered separately!) Length measurement technology TDR (Time Domain Reflectometry) and capacitive Cabling test and ID Up to 305 m Split-pair detection: 1 m to 305 m Length measurement: 0 to 457 m, ± (5%+30 cm) Distance to fault (short circuit): 0 to 200 m ± (5% + 1 m) Compatible with 8 pass-through test and up to 24 ID remote units (RJ45) (ID remote units only) Power over Ethernet (PoE) Tests according to IEEE 802.3af PoE (Type 1, max 15.4 W), IEEE 802.3at PoE+ (Type 2, 30 W) and 802.3bt PoE++ (Type 4, 90 W) Max. voltage Maximum voltage that can be applied to any two test inputs without damaging the tester: RJ-45: 60 VDC or 50 VAC Memory capacity Stores an unlimited number of cable or network tests per project with custom names Tone generator Tone frequencies: 730 Hz and 11.440 Hz Languages English, German, French, Spanish, Italian Battery Li-Ion, 7.2 VDC, 6.2 Ah / up to 4 hours (typical) External power supply 12VDC Permissible temperatures Operation: -10° to 60 °C Storage: -30° to 70 °C Permissible humidity 10% to 90%, non-condensing Housing Hodpoygwaysfx Ahvjni Plastic injection-molded Display 7" TFT-LCD color display with capacitive touchscreen, 1024 x 600 resolution (WSVGA) Dimensions 245 x 177 x 73 mm (main unit) 130 x 177 x 55 mm (active remote) Weight with batteries 1.2 kg (main unit) 0.6 kg (active remote)

Condition: used, functionality: fully functional, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence IM-8030 Digital Measuring Projector. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Hnedpfsyrcw Iox Ahvji Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 March 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: like new (used), Year of construction: 2017, functionality: fully functional, total width: 389 mm, total length: 479 mm, total height: 565 mm, overall weight: 36 kg, The EM TXP is a unique device developed for the precise preparation of a wide range of materials and material combinations exhibiting localized, minimal defects. It is specially designed for sawing, milling, grinding, and polishing demanding, small, and unwieldy specimens, where the work process is observed with a stereomicroscope and final inspection is conducted using a scanning electron microscope or light microscope without interrupting the individual steps. The EM TXP is particularly well-suited for pre-preparing materials that will undergo bevel cutting with an ion polishing system. Included accessories: - 1x Complete M80 stereomicroscope - 1x Crosshair stage for M80, 12 mm - 1x Movable objective adapter for M80 - 1x Angle adjustment adapter - 1x Diamond saw blade - 1x Diamond saw blade - 1x Special milling cutter, 6 mm Ø diamond edge - 1x Special milling cutter, 12 mm Ø diamond edge - 1x Special milling cutter, 8 mm Ø WC cutter - 1x Special milling cutter, 12 mm Ø WC cutter - 5x Arbor - 3x Carrier for lapping film - 1x Lapping film, 15µm, SiC, 30 mm Ø - 1x Lapping film, 9µm, SiC, 30 mm Ø - 1x Lapping film, 5µm, SiC, 30 mm Ø - 3x Carrier for lapping film - 1x Lapping film, 9µm, diamond (Type U) - 1x Lapping film, 2µm, diamond (Type U) - 1x Lapping film, 0.5µm, diamond (Type U) - 1x Lapping film, 0.1µm, diamond (Type LA) - 3x Carrier for lapping film - 1x Lapping film, 9µm, aluminum oxide - 1x Lapping film, 3µm, aluminum oxide - 1x Lapping film, 1µm, aluminum oxide - 1x Lapping film, 0.3µm, aluminum oxide - 1x Neoprene cloth for final polishing (8 pcs) Hodpfx Aoytrwaohvsni - 2x Box for carriers and films - 1x Holder for flat samples, 0-4 mm - 1x Flat specimen holder, 3-8 mm - 1x TXP SEM stub holder - 1x Universal sample holder

Condition: new, Year of construction: 2019, For sale is a new Faro Quantum M Arm from 2019, which has never been used! Therefore, it is in brand new condition! Hnsdpfx Ahsyti Nmovei

Condition: new, functionality: fully functional, warranty duration: 24 months, input voltage: 240 V, measuring range X-axis: 120 mm, measuring range Z-axis: 30 mm, overall weight: 70 kg, workpiece weight (max.): 100 kg, feed length X-axis: 120 mm, Equipment: type plate available, -Leasing option available!!!- ConturoMatic CV120 Contour Measuring Device – "Simply measure contours" - Sample parts for free measurement can gladly be sent within the agreed framework, online DEMO after coordination possible. Ask us about our leasing options – we are happy to refer you to our partner. ✅ Up to 30% declining-balance depreciation on movable assets* ✅ Applies to investments from July 2025* ✅ T&S products are fully eligible for funding* Contour measurement system with traverse unit and motorized Z-column Scope of delivery: - CV120 motorized traverse unit with precision guide - External control and regulation unit - Motorized Z-column - Evaluation PC Desktop version Win11/64 Bit - 24" TFT monitor - ConturoMatic evaluation software; user manual - Cable set - CM software updates FREE!!! Hsdpfxoq Nzd Nj Ahvsni Technical Data CV120: Traverse unit (X/Z measuring axis) - Z measuring range: 30 mm - X measuring range: 120 mm - Measuring speed: 0.1–1.75 mm/s - Tilt adjustment: +/-15° - Automatic probe arm lift-off Z-column - Positioning range: 320 mm, motorized Accuracy: X-axis: +/- (1.2 μm + 2Lx / 25) μm* [L = mm] Z-axis: +/- (1.8 μm + 2Lz / 25) μm* [L = mm] Note: To adapt our CV120 to specific measuring tasks and for system extensions, various optional accessories are available, including different probe arms, universal clamping devices or custom sample holders. * as per T&S/CV120 specification -Technical changes reserved- Commodity code: 90318020 -2 year warranty- Photos may show special accessories not included in standard delivery. *For legal reasons, we are not permitted to provide legal or tax advice on this topic, and the above notes must not be considered as advice. Please consult your respective contacts (specialist department or tax advisor) if in doubt.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: #4C0N000333, type of input current: AC, total width: 449 mm, total length: 557 mm, total height: 614 mm, overall weight: 35 kg, Equipment: type plate available, Item description: Keyence IM-8030T measuring system Including measuring head, control unit, rotation unit IM-RU1, 3-jaw chuck, 2-jaw chuck, keyboard, mouse, manual, etc. Technical specifications will follow shortly. ----- Item condition: Hjdpeyf H S Nofx Ahvsni The item is in very good condition and can be inspected at any time by appointment. Safe transport is ensured as all original packaging materials are available.

Condition: excellent (used), Year of construction: 2024, operating hours: 50 h, functionality: fully functional, warranty duration: 6 months, type of input current: AC, input voltage: 230 V, price is EX VAT new price is 46 000€, here you can save 22 000€ on a demo unit with extremely little use. Shining 3D FreeScan Trak Nova — Wireless, Marker‑Free Industrial 3D Scanner (very little used demo unit from official reseller) All‑in‑one, metrology‑grade system combining a large‑FOV tracker (UE Nova) with a high‑detail handheld laser scanner (TE Nova). Integrated Video Photogrammetry (VPG) enables marker‑free and fully wireless workflows, so you can capture big parts fast and then zoom in on fine features—ideal for inspection and reverse engineering on the shop floor or in the field. Highlights Wireless, marker‑free scanning via built‑in VPG (faster setup, stable volumetric accuracy) Two scanners in one: UE Nova for large areas + TE Nova for fine details (seamless data fusion) Large field of view for big components; agile in tight spaces Hot‑swappable batteries for uninterrupted work Metrology‑grade performance with traceable calibration Hjdeyr A Utjpfx Ahvoni Core Specs Point accuracy: up to 0.02 mm Volumetric accuracy: 0.062 mm (12 m³); with VPG: 0.046 + 0.012 mm/m Scan speed: up to 6.14 million pts/s Resolution: 0.01–10 mm FOV: up to 2.6 × 2.2 m Working distances / DOF: TE Nova 170–550 mm (DOF 380 mm); UE Nova 800–3500 mm (DOF 2700 mm) Connectivity: Wireless or fiber‑optic wired Weights: TE Nova 1.2 kg, UE Nova 1.6 kg Typical battery life (wireless): ~2.5 h (TE) / ~1 h (UE) Certifications: CE, FCC, ROHS, WEEE, KC, FDA, UKCA, IP50, TELEC, TiSAX

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Hsdpfx Ajyc H R Tjhveni Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: excellent (used), For sale: Professional Fischer DUALSCOPE DMP40 coating thickness gauge designed for non-destructive measurement of metallic and non-metallic coatings on various substrates such as steel, iron, aluminum, and other non-ferrous metals. • Condition: Very good, fully functional and ready for operation • Current PCA calibration certificate dated 05.11.2023 • Complete set in original case including probe, cables, calibration foils, adapter, manual, and certificate Specifications and benefits • Automatic substrate recognition (FE/NFE) and selection of the appropriate measurement method • Wide measuring range and high measurement precision • Color display with intuitive navigation menu in Polish • Functions for statistics, results recording, and data export • Non-destructive measurement – ideal for production quality control and laboratory testing • Compliance with ISO, ASTM, and DIN standards • Robust industrial housing suitable for both field and laboratory use The set includes • Fischer DUALSCOPE DMP40 gauge • Measurement probe • Measurement cables • Calibration foils • Measurement adapter • Original transport case • Fischer lanyard • User manual and PCA certificate Applications • Coating quality control in electroplating, painting, and automotive industries • Industrial production and research laboratories • Service measurements and technical inspections Hnsdpfxsxlu Taj Ahvoi

Condition: excellent (used), Sell Measuring Instrument, Carbidoor, HSAFS. Hsdevdx U Nspfx Ahvoni

Condition: excellent (used), I sell the SaluTron D2 Paint Thickness Meter. Hedpfxsvbwy Ej Ahveni

Condition: good (used), Year of construction: 2007, I am selling a Kelch Seca 04E measuring device. Hsdeug T Hmjpfx Ahvjni

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale: ARTEC LEO handheld scanner (2020) with lifetime Artec Studio 17 software. The scanner has been used very little and is in like-new condition! Price: 16,000 EUR + VAT). (New price: Artec Leo €35,000 + Artec Studio €3,200) Available for viewing and testing at: Limes 3D Innohub Kft., 1117 Budapest, Budafoki út 60., HUNGARY. Hnjdpfxswcfb Eo Ahvei

Condition: new, Year of construction: 2019, functionality: fully functional, type of input current: DC, Balancing system for tool holder TD 2009, new. Never used and stored under protection. Hnjdpfx Aheycfrvsvei

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 070898, For sale is an industrial magnetizing device, model MC2K3S from MAGSYS – a high-performance high-current pulse magnetizer designed for reliable magnetization and demagnetization of a wide range of magnetic materials and assemblies. The device is ideal for professional use in production, laboratories, development, or quality control. Hedeyn Itaopfx Ahvoni Its robust construction, digital control, and modular adaptation options make this equipment a proven machine for users with high demands for precision and process reliability.