Used Thread Measuring Wire for sale (10,861)

Condition: excellent (used), Year of construction: 2015, operating hours: 5,090 h, functionality: fully functional, machine/vehicle number: T0298, workpiece weight (max.): 850 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 245 mm, workpiece length (max.): 670 mm, type of input current: three-phase, table width: 960 mm, input frequency: 50 Hz, Equipment: cooling unit, The Sodick VZ500L is a wire-cut EDM (Electrical Discharge Machining) machine from Sodick, designed for electro-erosive machining of metals. This is a wire-type machine equipped with linear drives, enabling precise cutting of intricate shapes at an angle based on CAD files (e.g., DXF, STEP, IGES). Main features: Type: Wire-cut EDM Manufacturer: Sodick Model: VZ500L Drives: Linear Working range (X x Y x Z): 500mm 350mm 250mm Maximum workpiece dimensions: 960mm 670mm 245mm Maximum workpiece weight: 850 kg Capabilities: Angular wire cutting (based on 3D models) Additional features: Hjdpfx Abjx Ekcyj Isk Automatic wire feeding (AWF) Immersion in dielectric fluid

Condition: like new (used), Threaded steel holder, Manufacturer KOMET, Type FG Hsdpfxeyu Rrfj Ab Ijk 1 x Type FG II 1 x Type FG III 1 x Type FG IV 1 pc. insert for FG IV

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. Hedpfxoyu Nabe Ab Iok - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: as good as new (ex-display), Durkopp adler -3-TRANSPORT -1 NEEDLE WITH TRIM-KNIFE Hodpfxehc Nbfe Ab Ijk -THREAD TRIMMER

Year of construction: 2001, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 350 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 220 mm U/V-AXIS TRAVEL: ± 80 mm MAX  PIECE WEIGHT: 450 Kg TANK SIZE: 895 x 650 x 220 mm Hjdpfxeyry Tae Ab Isk TABLE SIZE: 600 x 400 mm DRAFT ANGLE / DRAFT HEIGHT: 20 °; 80 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,1-0,3 mm WEIGHT: 3000 Kg OVERALL DIMENSIONS: 1650 x 2125 x 2080 mm ACCESSORIES: ETHERNET PORT ; PCMCIA SERIAL PORT ; RS 232 SERIAL PORT

Condition: excellent (used), functionality: fully functional, For sale due to new acquisition: a digital measuring projector from Keyence. Hjdpfx Abjyuyxns Iek Price: plus shipping costs (collection possible)

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5387 Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Hsdpfoyuypysx Ab Isk Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Year: 2020 Operating hours: 4672 hours Capacity: 48 V / 620 Ah Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks - Induction / Wire Guidance

Condition: excellent (used), For sale: Professional ETAS measurement and interface set used for development, testing, and calibration of ECU controllers in the automotive industry. Manufacturer: ETAS Application: R&D, test benches, ECU calibration, INCA / ASAP3 ⸻ Set includes: • ETAS ES891.1 – interface/measurement module (ES800 family) • ETAS ES165.1 – Automotive Ethernet interface • Complete set of original ETAS cables (CAN, FlexRay, Ethernet, interface cables) • Adapters (including F-00K-103-786 – visible in the photos) Hjdpfjyc Iiqox Ab Ijk • Original ETAS documentation • Everything exactly as shown in the photos ⸻ Applications: • ECU data measurement and logging • Calibration of engine and vehicle control units • CAN / FlexRay / Automotive Ethernet communication • Work with ETAS INCA, testing and research environments • Automotive laboratories, R&D departments, technical universities ⸻ Condition: • Equipment in very good technical condition • No mechanical damage • Connectors clean, undamaged • Normal, slight signs of use • Devices fully functional

Condition: excellent (used), Precision CNC tool presetting and measuring device from renowned manufacturer KELCH – model Trabant 271-2/M. Equipped with a length and diameter measuring system featuring optics and a KELCH Pico LCD A23 monitor, as well as Heidenhain ND1202T Tool-Chek electronics. Very good condition, complete and fully operational unit. Technical specifications and features: • Manufacturer: KELCH GmbH + Co. Werkzeugmaschinenfabrik, Germany • Model: Trabant 271-2/M • Year of manufacture: 2000 • Measuring unit: KELCH Pico LCD (Version A23) • Display system: Heidenhain ND1202T Tool-Chek • Power supply: 230V / 50–60Hz / 1000 VA • Optical system with measuring camera and LCD screen • Rotary table with holders and two-axis adjustment system • X/Z axis measuring range: up to approx. 400 mm • Axis control from KELCH control panel (joystick + function keypad) • Digital readout, menu in German and English • Complete with original documentation and all connectors Condition: • Used, fully functional • Very clean example from a German toolmaking shop • All axes move smoothly, screen responds correctly • Ready for work Functional description: The KELCH Trabant 271-2/M is designed for fast and precise presetting of cutting tools prior to mounting in CNC machines. The optical system with Pico LCD display allows for measurement of tool length, diameter, and geometry in visual mode. Ideal for inspection and presetting of milling cutters, turning tools, drills, and special tools. Hsdpfx Absxn Ax Ae Isk

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220708845GC, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, Used demonstration machine, year of manufacture 2022 (TOP condition + fully functional) • OPTIV M 4.4.3 multisensor coordinate measuring machine (CMM) with Dual Z technology • Base frame • 10x CNC motorized zoom with digital color camera and 12-segment LED ring light • HP-S-X1C scanning sensor • 3x HP-S-X1C/H stylus holders (1x M3) • M3 stylus (R-5-SS-3-L50) • HR-X probe rack for HP-S-X1C/H (3 ports, l=400) • Sensor calibration unit without calibration artifacts • Glass standard • Setting ring 20 mm • Reference sphere Ø 25 mm • Measurement and evaluation software PC-DMIS CAD++ (version 2024.2) • Machine control unit (PC) Hjdsycqa Sepfx Ab Iek • 2 monitors + mouse + keyboard + desk Delivery, commissioning, calibration on request

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 250 kg, total height: 2,650 mm, type of input current: AC, overall weight: 1,000 kg, input voltage: 230 V, ambient temperature (max.): 26 °C, ambient temperature (min.): 18 °C, temperature: 20 °C, CNC 3D measuring machine with new server PC and PC-DMIS CAD 2025.1 Hjdpfxsw Rv A Io Ab Iek Renishaw PH10MQ rotary-swivel head with 7.5° and scanning probe SP25M-2 6-position probe change rack, desk, and accessories

Year of construction: 1997, condition: used, Mistral 0705 Co-ordinate Measuring Machine. S/No. 00851 (1997), Bed Size 1280mm x 910mm, Renishaw PH10M Probe, Wired Remote Control, Work Space 700mm x 900mm, Renishaw PHC 10 Probe Head Controller, ACC 2000 CNC Controller, Dell Desk Top with Monitor and Accessories, Selection of Probes, Fixture Plate 610mm x 610mm Location: This lot is located in Birmingham, UK. A charge of £150 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Hsdpfeyuwrlsx Ab Isk

Year of construction: 2018, condition: ready for operation (used), Media Power consumption 430 VA Hedpfxex D E Nps Ab Iok This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. Application Types Measuring

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Hedpfjxl Ebhex Ab Isk Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Hodpfjx D Rqfsx Ab Iek Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Generator Size: 600 x 650 x 1765 mm This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2300 mm Measurements depth 4400 mm Measurements height 3100 mm Machine weight 7000 kg Control Unit Model Siemens 840 D Main Drive Hjdpfxjx D Nare Ab Iok Spindle speed range 10000 Movement X-Axis Movement 2500 mm Y-Axis Movement 900 mm Z-Axis Movement 850 mm Tools Slots in storage 40 This Hexagon PIONEER 061006 was manufactured in 2013. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Ideal for ensuring product accuracy and consistency. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Movement X-Axis Movement 800 mm Y-Axis Movement 1000 mm Z-Axis Movement 700 mm Additional Equipment Probes: 2 included This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information. Application Types Measuring Hjdpfx Aex D Nrhob Isk

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Z-Axis Movement 500 mm Y-Axis Movement 700 mm Hjdpfex Imt Hjx Ab Isk This 3-axis Hexagon Global S 05.07.05 was manufactured in 2021, featuring a measuring range of X 500mm, Y 700mm, Z 500mm. It includes an indexable swivel head, HH-AS6-T5, and an HP-S-X1S touch probe with a standard styli set. Ideal for precise measurements in extended temperature ranges (16-26 °C). If you are looking to get high-quality measuring capabilities consider the Hexagon Global S 05.07.05 machine we have for sale. Contact us for more information. Application Types Measuring

Year of construction: 2007, condition: ready for operation (used), This Sodick AQ537L was manufactured in 2007. It operates optimally between 20°C and 25°C ambient temperatures, with a full load current of 43 A and a rated capacity of 15 kVA. It requires a supply voltage of 200 V and is designed for three-phase power. Contact us for more information about this machine. Hjdox D Iplspfx Ab Isk Application Types EDM

Year of construction: 2019, condition: ready for operation (used), overall weight: 300 kg, General Data Machine weight 300kg Hjdpfxsx Hblhj Ab Isk Tools Max weight 20kg Max tool diameter 400 mm Max tool length 400 mm Additional Equipment The machine includes monitor, computer and label printer. This HAIMER UNO 20|40 optical measurement machine was manufactured in 2019. It supports a maximum tool diameter and length of 400mm, with a tool weight capacity up to 20kg. The machine itself weighs 300kg. If you are looking to get high quality measurement capabilities consider the HAIMER UNO 20|40 machine we have for sale. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 890 mm Measurements depth 788 mm Measurements height 939 mm Machine weight 180 kg Main Drive Number of axis 3 Hsdpfxsx D H Nwj Ab Isk This 3-axis Hexagon Optiv Performance 322 was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon Optiv Performance 322 CMM machine. Contact us for more information. Application Types Measuring

Condition: ready for operation (used), Year of construction: 2020, General Data Machine weight 2350 kg Measurements height 2700 mm Dimensions Machine Length 2100 mm Main Drive Number of axis 3 Hjdex D Hvqjpfx Ab Ijk Movement X-Axis Movement 600 mm Z-Axis Movement 500 mm Y-Axis Movement 700 mm This 3-axis EROWA CMM Qi was manufactured in 2020. It features a travel range of 600mm on the X-axis, 700mm on the Y-axis, and 500mm on the Z-axis. The machine can handle a maximum workpiece weight of 650kg and includes advanced components like the PH10MQ touch probe system and FCR25-L6 touch probe changer. Ideal for precise measurements in quality control processes. Contact us for more information about this machine. Application Types Measuring

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Hjdpoxytmhsfx Ab Isk Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: excellent (used), Year of construction: 2016, operating hours: 8,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,345 mm, total length: 2,945 mm, total width: 2,757 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, type of input current: three-phase, table width: 490 mm, table length: 840 mm, table height: 995 mm, empty load weight: 4,600 kg, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 350 mm, table load: 1,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, documentation/manual, Commissioning date: May 2017. Cutting time: 8,000 hours. At our company, the machine operates in a climate-controlled, virtually dust-free facility with an epoxy-coated floor. Price of the machine – loaded onto a vehicle in Hungary. Shipping and all other costs are the responsibility of the buyer. Hedpfx Aeyuutgeb Iok

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Hjdjx D Iifopfx Ab Isk Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM