Used Sumab for sale (203)

Condition: new, AB-1510DEX Range 1500mm Lifting capacity: 6KG Supply voltage: 220v ±10%,1 phase, 50 Hz Source: AOTAI MAG-350RL (350A , Supply voltage: 380v ±10%, 3 phase, 50 Hz) After-sales and warranty service begins with the delivery of machine to the Buyer (consumable parts are not included in the warranty). Warranty period: (a) robot with controller - 12 months, Laedpfxou Tgwfe Affok b) welding source - 12 months, c) remote control (without screen) - 3 months.

Condition: good (used), Year of construction: 1997, machine/vehicle number: 97-04002, Offer 25114 Technical specifications approx.: - Roller diameter 500 mm - Throat depth 500 mm - Max. clearance height 400 mm Lsdjwmnz Nopfx Affeak - Table size 630 x 530 mm - Table tilts 10/30° - Table height from floor 950 mm - Saw blade length approx. 3900 mm - Saw blade width approx. 3 - 25 mm - Cutting speeds (presumably) 81 - 145 - 208 - 267 m/min - Drive 400 V / 1.1 kW - Weight approx. 400 kg - Space required approx. W 750 x H 2000 x D 1000 mm

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm Ljdjxdy R Iopfx Affsak 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: refurbished (used), For Sale: Refurbished EOS M290 – Ready to Use This fully inspected and refurbished EOS M290 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 250 x 250 x 325 mm • Laser Type: Yb-fiber laser; 1 x 400 W Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Ljdpfx Aswmq Dyeffsak Please feel free to contact us for more information or questions!

Condition: ready for operation (used), Hsm V-Press 860 Baler, year of manufacture: 2005-2009, price: €5,600 Compression force: 54 kN Specific pressure: 63.46 N/cm² Lsdpora Rbgefx Affsak Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening (W x H): 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Consumables: Wire Pressed material: film, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene Hsm V-Press 860 Plus Baler, year of manufacture: 2013-2015, price: €7,500 Hsm V-Press 860 L Baler, year of manufacture: 2015, price: €9,000 Hsm V-Press 860 Plus Baler, year of manufacture: 2019, price: €9,000 Hsm V-Press 860, ex-demo, year of manufacture: 2020, price: €13,000 Fourfold bale strapping with wire Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight (kg): approx. 500 kg Technical data: (L x W x H, mm): 1,213 x 1,824 x 2,987 Loading aperture (mm): 1,200 x 565 Cycle time (s): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Hsm V-Press 860 Plus B Baler, year of manufacture: 2020, price: €14,000 Pressing force: 594 kN Voltage/frequency: 400 V/50 Hz Power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Filling method: Manual Dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Weight: 2,336 kg Consumable type: Wire Pressable materials: film, cardboard Idle cycle time: 25 s

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 NESTRO® extractor, a new generation, powerful, compact, economical, and with some highlights that will inspire you. Vacuum filter for extraction and filtration of wood dust and wood chips. H3 test according to GS-HO-07 (BGHM), GS scheduled. Fire extinguishing device, fire protection flap / oxygen closure. Vacuum filter with JET compressed air pulse cleaning including suction nozzle, 5 m cable for socket connection (protective measure grounding), suction connection left / fan right Technical data: • Airflow max./nom.: 6,000 / 5,850 m³/h • Vacuum max./nom.: 2,950 / 2,400 Pa • Suction side connection: Ø 300 mm • Mode of operation: continuous operation • Current type: three-phase current • Power consumption: 7.5 kW / 16 A / 50 Hz Lasdpow Naazofx Affjk • Fan/drive: IE3 asynchronous motor • Filter area: 36.2 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 Nliters • Chip disposal: chip bin with PE bag • PE bag (consumable): 500020 • Collection volume: 3 x 0.16 m³ • Weight: approx. 1,250 kg • Noise level according to EN 11201: 72-74 dB(A) in accordance with MRI (+/- 4dB) • Length x width x height: 3880 x 1020 x 2250 mm Required connections: • Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free • 1 x 32 A CEE socket / fuse 25 A For systems with chip sack filling, uniform filling cannot be guaranteed due to different extraction volumes and varying chip/dust contents Availability: short-term Storage location: Flörsheim

Condition: not inspected (used), machine/vehicle number: 217403, GIRO net packaging machine, type Girplus RS Classic Attractive appearance due to the central message on the pack header. Possibility to make the header with 1 or 2 flaps (see Picture 1) or without flaps (see Picture 2) Possibility to include or not include handle holes. Allows the use of registered Girfilm at both, one or none of the sides. Flexibility to utilize 90 or 119mm header width Handles up to 3kg without needing inner or outer reinforcement bands. 100% recyclable. Net and film are fully made of polyethene. No additional raw material is used. Uses the same consumable materials for all different packaging styles. Thus affording the packer a stock cost-saving and facilitating stock management. Lsdpsg H Tc Sefx Affjak Allows the use of self-adhesive labels up to 78 x 36 mm The Girplus-R welding machine offers the packer the possibility of making different bag styles with just one machine. RECOMMENDED CONSUMABLES FROM 1,0 KG TO 3,0 KG PACKAGES Weight 1kg to 2,5 kg - NET GC-80-46-2625 and GC-92-46-R4-2225 and GC-104-46-R4-1923, Film width 119 mm film thicknesses 450gg Film length without flap 87 mm. (65 headers + 22 bottoms) or 143 mm. (121 headers + 22 bottoms) Label: 78 x 36 mm. Weight 3 kg – NET GC-80-46-2925 and GC-92-46-R4-2225 and GC-104-46-R4-2025 Film width 119 mm film thicknesses 450gg Film length without flap 87 mm. (65 headers + 22 bottoms) or 143 mm. (121 headers + 22 bottoms) Label: 78 x 36 mm. Power supply: 380 V, 16 A Video with our machine in the link below: Price Euro 2.500 Euro + VAT, Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F370CR, Year of construction: 2023, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, Ex-display, like new. Available Now - Excellent Price! Lajdpfsv Uv Eyex Affjk Composite-ready industrial FDM 3D printer with large build volume and soluble supports. Ex-display unit from 2023 in pristine, fully tested condition. Immediately available in Ostrava, Czech Republic. The prices includes consumables (NYLON-CF10, ABS-M30 IVR). What can the Stratasys F370CR do for you? ✅ Unmatched Precision & Repeatability Enjoy print accuracy up to ±0.2 mm. Built-in automation ensures stable printing with minimal waste. ✅ Strong, Durable Parts Print high-performance parts reinforced with carbon fiber materials like ABS-CF10 and FDM Nylon-CF10 – ideal for replacing metal components. ✅ Complex Geometry Advanced soluble support materials allow for the seamless creation of intricate structures that would be difficult or expensive using traditional methods. ✅ Streamlined Workflow & Easy Integration GrabCAD Print™ makes print preparation simple and works directly with your CAD models. Upgrade to GrabCAD Print Pro™ or Insight™ for advanced optimization features.

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: Ljdpfx Afsw Ix Dpefsak RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 155-11000, Year of construction: 2015, operating hours: 24,000 h, total length: 1,295 mm, total height: 1,984 mm, total width: 902 mm, For sale is a Stratasys Fortus 450mc from our production facility. This is a professional FDM production system designed for industrial applications. The machine has received a complete new maintenance service and is therefore in technically flawless and immediately operational condition, featuring an integrated compressor. Optional: The machine can be purchased with consumables: Currently available: - 400 kg ABS ivory - 400 kg ABS black - SR-30 - Build plates Laodpfxoxaucko Affjk - Nozzles, ... Maximum build volume: 406 x 355 x 406 mm (X, Y, Z) Build chamber: heated, enclosed for consistent print quality Material compatibility: ABS-M30, ABS-ESD, ABS-M30i, ASA, ULTEM 1010 Layer thickness: selectable depending on the application (0.127 – 0.330 mm) Repeatability: ±0.127 mm or ±0.0015 mm/mm

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 300 h, Price is for the machine from the demo center, including additional barrel and second build platform. - Construction space 250*250*250 - Scan speeds up to 12 m / s Laodjhvim Espfx Affsk - Layer thicknesses from 0.05 mm - Accuracy of +/- 0.1% over part length - Granite return frame - Control of key operating parameters - Pump fed replenishment capability - High performance vacuum overcoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB and Panasonic. The machine has an open material platform - consumables from all manufacturers can be sourced and processed directly. Transport; commissioning and consumables are not included in the price. The local UnionTech partner takes over setup, training and service!

Condition: used, Electro Dual Screwdriving Unit with Automatic Feed and Pneumatic Double Stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit is equipped with a pneumatic double stroke, operated via Festo valves and cylinders. Additionally, various monitoring systems are installed for full automation. Technical data: Torque of electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Spring stroke for screwdriver: 20 mm Distance between both screwdriving tools: 73 mm - Equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - Requires Bosch Rexroth LT303 power module for operation (power module not included) Screwdrivers 1 and 2 are each composed of the following components: Lajdjhxvu Eopfx Affok Rexroth type servo motor Rexroth type 0 planetary gearbox Rexroth type 0 encoder Rexroth type 0 straight drive output Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material no.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material no.: 0 Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight drive output Rexroth Type: 2GA82 SZ2 1/4" SQ Material no.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Max. torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm One 7 m motor connection cable is included in the delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg Good condition

Year of construction: 1999, condition: good (used), COMPLETE DAIRY - in full production function We offer for sale a complete dairy for the production of consumable, pasteurized milk, yogurt, kefir, cream and cheese (fresh and sliced cheese) Capacity: 15 – 20,000 L of milk/day Milk is packed in PVC bags of 1.0 L - capacity 2,400 pcs/h Yogurt is filled in: - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h - PET bottles 0.5 and 1.0 L - capacity 1,000 pcs/h Kefir is filled in PET bottles 05 and 1.0 L, capacity 1,000 pcs/h The cream is filled in: -bowls 1000 gr - capacity 3,000 pcs/h - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h Cheese is filled in: - buckets of 5 and 10 kg - fresh cheese -vacuum foil - fresh and white cheese slices 500-1,000 gr Equipment specification - manufacturers from Italy - Slovenia and Serbia Reception line Digital meter with foam remover, 2014 Tank horizontal (lactofreeze) 3,200 L cooling on freon - 3 pcs Tank vertical 3,000 L – 2 pcs Pasteurization line Pasteur (flow-through) with retainers 2,000 L Separator (self-cleaning) 2,000 L Homogenizer 2,000 L The equipment is adapted to the capacity and made to order Manufacturer Scremac Italy 2000 years. Fermentation line Duplicator 2,000 L – double wall insulated with planetary mixer 2010. Duplicator 1,000 L – double wall insulated with planetary mixer 2010. Filling lines Two-row automatic filling machine for filling cream into bowls Automatic filling machine for filling cream and yogurt per 410g, 2014. Automatic filler for filling yogurt and cream 180gr, year 2008. Filler - capper - dater - automatic packing tunnel Fills 1.0 L and 0.5 L bottles, 2016 Filling machine for milk and yogurt in PVC bags 2400 pcs/h. Original French manufacturer, older year. Lasdpfx Ajk I T Sijffek Videojet - automatic date marker, - 2 pcs Cheese tub insulated with HARFO 1,600 L, 2008. Triblender 500 L for the reconstruction of powdered milk, 2015. Vacuum cleaner for fresh and white cheese slices Ice water pool (STAINLESS STEEL VESSEL) 10,000 L, FREON cooling, manufactured by KOTA-Slovenia, year 2000. A new compressor has just been put on it. Chip for washing 3 x 2,000 L, automatic, year 2010. Semi-automatic PET bottle blower 1.0 and 0.5 L with Boge compressor, year 2010. Complete cooling system for cooling the warehouse of finished products, and the same is programmed for heating and cooling the fermetal chamber, year 2010. manufacturer KOTA-Slovenia, with 3 engines Mini (drive laboratory) Solid fuel boiler (wood) 250 kW Mono-pump All equipment is connected by pipe fittings and pumps for operation. The start of the dairy: 1999 The equipment is in full production function and can be seen in operation It is regularly serviced and maintained - the last service was performed 6 months ago Installed power 50 kW Solid fuel - wood - is used as energy Required hall size: 500 m2, height 4 m 16 workers work in the dairy The complete dairy is for sale, not in parts.

Condition: new, Year of construction: 2025, total width: 2,100 mm, total length: 1,260 mm, total height: 2,150 mm, A high-quality device for the regeneration of DPF/FAP/GPF/SCR/EURO 5/EURO 6 filters and catalytic converters. Constructed entirely from stainless steel (AISI 304) and acid-resistant steel (AISI 316), suitable for all types of vehicles. The machine is equipped with a 275-liter tank, a high-pressure pump with a capacity up to 250 l/min, and an integrated filter drying system. The Master Flash technology utilizes the full benefits of the hydrodynamic method, restoring filter efficiency up to 99.9% compared to the new one. It is completely safe for the monolithic structure of DPF filters. Properly adjusted parameters ensure that PM10, PM2.5 particles, soot, carbon deposits, oil, cerium oxides, and heavy metals are thoroughly removed, maintaining the filter's factory characteristics. The pump with chemical sealing and electronics based on components from leading European manufacturers guarantee the highest quality and reliability. The machine is equipped with a filter contamination measurement system (backpressure measurement) and an integrated filter drying system with a temperature range of 70 to 130 degrees Celsius. The filtration system, expanded with a pre-cleaning filter, significantly extends the lifespan of the main filters. Master Flash technology, combined with the unique XPOWER DPF CLEANER chemistry, effectively removes PM10, PM2.5 particles, carbon deposits, oil, cerium, and heavy metals without mechanical interference with the filter structure, restoring its factory performance to 99.9%. TECHNICAL SPECIFICATIONS: * Weight: 650 kg * External dimensions (H x W x D): 215 x 210 x 126 cm * Chamber dimensions (H x W x D): 107 x 140 x 89 cm * Tank capacity: 275 l * Operating pressure: 6 - 8 bar (90 - 100 psi) * Voltage: 3 x 400V * Max power: 12 kW Laodpfx Afegllkaofsk * Frequency: 50 Hz * Water inlet connection: 1/2” * Water outlet connection: 6/4” * Air connection: pneumatic quick coupling DN 7.2, plug * Ambient temperature: 5 - 35°C EQUIPMENT: • High-quality components • 7” color touchscreen • Sensors: liquid level, liquid and air temperature, pressure flow, door opening, phase loss, and phase sequence • Filter contamination measurement system • Chamber made of stainless steel AISI 316 • Extended 4-stage liquid filtration system • Two heaters • Integrated drying system with a temperature range from 70 to 130°C • Drying system cooling • Integrated thermal printer for filter parameter printouts • Ethernet controller for remote diagnostics • Set of connection adapters for DPF/FAP/GPF/CAT/SCR filters • EURO5 and EURO6 adapter • Starter kit of consumables (complete set of filters + 2L XPOWER DPF Cleaner detergent) • Extended 12-month manufacturer warranty (optional 24 or 36 months) AVAILABLE IN VARIOUS CONFIGURATIONS - CONTACT US FOR MORE INFORMATION.

Year of construction: 2025, condition: as good as new (ex-display), SERVOCUT 302-MA Automatic abrasive cutting machine - programmable with 7" touch screen operating panel with SIEMENS-PLC control - automatic moving table + manual chop cut (other types available) - cutting machine for a variety of different programmable cutting processes - programming of cutting parameters via LCD display - precise and motorized positioning of the sample in X - Y and Z axis - integrated moving table control with force-dependent adjustable infeed speed - variable cutting force, mode for pulse cut, overload protection of the drive motor - compact engine 2,800 rpm cutting disc speed - electronic braking system - cutting capacity up to 110 mm solid material (with cut-off wheels Ø 300 mm) - double, split (left/right) stainless steel T-slot table - floor assembly made of solid die-cast aluminum - incl. 80 l circulation cooling system complete with connection hoses - delivery ready for operation (without clamping devices) Lodpfx Ascw Ipajffjak - power supply 400 V / 50 Hz, 3 phases with neutral 16 A back-up fuse - delivery including test equipment Consumables consisting of: * Assortment of 20 cutting discs with 300 mm diameter * 5 litre METCOOL coolant liquid

Condition: excellent (used), Matrix 530DP Double-Sided Pneumatic Laminator with Omni-Flow Feeder Price: Contact for pricing Location: Glendale, UK Availability: In stock – ready to ship Condition: Refurbished by trained engineers – Excellent condition, perfect working order Overview Boost your print finishing with the Matrix 530DP double-sided laminator, fully refurbished and tested by our trained engineers. Designed for professional print rooms, this automated laminating system includes the Omni-Flow Automatic Sheet Feeder, digital foiling/sleeking unit, and silent air compressor. It’s the perfect solution for short, medium, and long-run lamination and foiling. Key Features Professional double-sided lamination up to B2 size (510mm width) in a single pass – saves 50% production time over single-sided models. Omni-Flow Automatic Feeder with deep pile (180mm capacity), handles sheets up to 460mm x 9000mm and stock up to 400gsm. Automatic sheet separation with lamination speeds up to 10 metres per minute. Digital foiling and sleeking unit for premium finishes: foil, holographic, glitter, and Spot UV-style effects. Silent pneumatic compressor for consistent roller pressure without noise disruption. Refurbished and serviced for excellent condition and reliable performance. Included in Package Matrix 530DP Double-Sided Laminator Omni-Flow Automatic Sheet Feeder Foiling/Sleeking Rewinder Silent Air Compressor Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established, trusted supplier – years of experience serving the print and finishing industry. Specifications Manufacturer Vivid Model Matrix 530DP Double Sided Laminator with Omni-Flow Sheet Feeder Lodpfx Asw Tlk Toffsak Condition Refurbished Stock Number 114957 Sheet Feeder Yes Pneumatic Pressure Yes Air Compressor Yes Max Speed 10 metres per minute Max Sheet Size 460mm x 740mm (550mm width in hand feed) Feeder capacity 180mm Paper Thickness 100-400gsm Warm Up Time 10 minutes Temperature Range 0-140°C Power Supply 32amp 220/240V. Dimensions (L)1800mm excluding exit tray x (W)860mm x (H)1600mm Machine Weight 380kg (Matrix & OmniFlow)

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Lajdpfxjw Dn Uws Affjk Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Lodpfxodzp Tro Affeak Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, color channels: 4, total length: 3,200 mm, total width: 2,000 mm, total height: 1,700 mm, year of last overhaul: 2022, overall weight: 4,500 kg, Refurbished, fully functional 4-color sheetfed offset press is being offered ex works for sale due to lack of space (including transport pallet). The machine is in current operation and can be inspected by appointment at any time. COMPLETE OVERHAUL: 06/2022 (fully dismantled, refurbished, and continuously used ever since) IMPRESSIONS: approx. 4.2 million HIGHLIGHTS Lasdpfew Ahgqsx Affek - Waterless 4-color offset technology - Maximum speed: 7,000 SRA3 sheets per hour with the possibility of immediate job inspection - Capable of printing on various materials and envelopes - Very short setup times for print units (just a few minutes) - Minimal number of make-ready sheets required - Fully computer-controlled machine, automated plate imaging, ink supply adjustment, and automatic registration - AP 110 powder spray unit - Colortronic control console with remote ink zone adjustment - IR dryer - PDS (Print Density Control System) at the main operator station PRINTING MATERIAL - Sheet size: min. 100 x 90 mm / max. 460 x 340 mm - Material thickness: 0.06 – 0.5 mm - Printable substrates: paper, plastic, PVC, PP, PC, PETG PRINTING PLATES - Waterless, process-free thermal plates (28 plates/roll) - Plate life: approx. 20,000 impressions per plate IMAGING - Profire Presstek Firepower multi-beam laser - Imaging time at 2,540 dpi: approx. 4 min 30 sec - Imaging time at 1,270 dpi: approx. 2 min 20 sec - Dot size: 16 microns at 2,540 dpi SOFTWARE & HARDWARE - DI server PC - Operating system: Windows 2000 Server - Input formats: PostScript, JPEG, EPS, PDF, Bitmap, DCS2, TIFF6, TIFF-P1 INCLUDED ACCESSORIES AND CONSUMABLES - CMYK ink - Printon - Thermal plates - Blankets - Roller cleaning trolley SHIPPING Shipping is not included in the purchase price. The item can be dismantled and loaded on site by the buyer (EXW). A quotation including dismantling and loading upon request can be provided. ITEM CONDITION The machine has already been used but was fully dismantled and refurbished in 2022. It remains in active use and is fully operational. INSPECTION The machine can be inspected by appointment at 8700 Leoben. WARRANTY This sale is made without any warranty. The exclusion does not apply for compensation claims arising from grossly negligent or intentional breach of seller’s obligations, nor for injury to life, limb, or health. The above item is described to the best of the seller’s knowledge and belief, and any known possible defects have been disclosed. Subject to prior sale.

Year of construction: 2003, condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Lodpfx Afsu Dalyofjak

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Lajdpfx Ae Ebqneffsk Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Delivery including a test equipment consumables consisting of: * Assortment of 20 cutting discs * 5 litres METCOOL coolant Option: Machine base cabinet

Condition: new, Year of construction: 2025, operating hours: 20 h, machine/vehicle number: Parmel_042025PA, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software • 12-month warranty Laodpfx Afew N Rz Aefek We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: new, Year of construction: 2025, Hand-held laser welding machine Fiber Innovation Laser Lsdpfxot Al Txs Affjak Laser power: 1500W - 3000W Ergonomic plastic head 2-year warranty! We offer warranty and post-warranty service. We have a stock of spare parts and consumables. From order to commissioning, even in 5 working days! The hand-held fiber laser welder is a modern alternative to TIG and MIG/MAG welding. It is ideal for welding thinner materials and thicker materials using higher laser power. Laser welding results in significantly less heat distortion, up to 4x faster work, ‘ready to go’ welding without the need for additional processing. Achieving a visually good and robust weld is much easier than with conventional welding methods. Welding thin aluminium and stainless steel is simple and trouble-free, unlike the TIG method, which requires a very experienced welder. The ability to feed a wire, or even two wires at the same time, allows larger gaps to be joined and a wide weld size to be achieved. Technical parameters (1500W/ 2000W/ 3000W): -Laser wavelength: 1070 nm ±10nm -Maximum power consumption: 8kW/ 10kW/ 13kW -Cooling system: water-based -Operating voltage: 400v-16A/ 400V-32A/ 400V-63A -Operating voltage. -Melting depth: 0.2-2 mm/ 0.2-3 mm/ 0.2-4 mm - Dimensions: 1000 x 450 x 750 mm - Weight: 80kg/ 90kg/ 100kg The price of the machine includes: ->Installed cooler ->Raycus laser source ->Touch screen panel with menu in Polish ->Ergonomic plastic head ->Single / double wire feeder (optional) Each unit comes with an instruction manual in Polish and a CE declaration of conformity. We are happy to produce weld samples for the selected workpiece on request. We offer machines with different configurations, working fields and laser power. Please do not hesitate to contact us. The price shown in the offer refers to the version of the CX-CS1500-H (1.5kW) welding machine with a single wire feeder. The actual appearance of individual components may differ from the graphic shown in the offer.

Condition: used, Steel and cast iron straightening and welding plate, heavily ribbed heavy-duty straightening plate Length 1600 mm Width 1005 mm Thickness 280 mm Plate thickness approx. 85 mm throughout - Center hole Ø 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes Ø 27 mm Lajdsdzqbajpfx Affjk Weight approx. 2.5 t Good condition Former press table – presumably machined parallel on both sides

Year of construction: 2025, condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Ljdpfx Afscwamxjfsak Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany (Optional installation by our technicians on site)