Used Sumab for sale (205)

Condition: used, For sale: Fromm AP500 Air Cushion Machine – For producing void fill material Very neat and well-functioning Fromm AP500 air cushion machine for sale. Ideal for producing air cushions as packaging void fill during shipping. This machine produces four cushions at once and automatically rolls up a supply. Once the roll is full, the machine stops automatically. Suitable for various airbag sizes. 🔧 Condition & operation The machine operates well. When starting up, the first few bags may be empty (presumably due to insufficient preheating). Once warmed up, it produces sturdy, well-filled cushions. This may be adjustable. 📦 Extras Film rolls available at additional cost Operating video available via WhatsApp Redpoxn Tz Usfx Ag Aoch Sold with invoice Price is excluding VAT 🔑 Keywords: Airpad, airbags, void fill, air cushion, air cushions, air bags, airpads, Fromm, Brüninghaus, AP500, AP502

Year of construction: 2000, condition: ready for operation (used), Four injection molding machines from various manufacturers are available. 1) Arburg Allrounder Centex 420C 1000-350, year of manufacture: 1996, clamping force: 1000kN, heating power: 8.6kW, weight: approx. 3850kg. The door interlocks of the machine are defective, and both control blocks are leaking oil. 2) Battenfeld BA 500-200 CD Plus, year of manufacture: 1991, weight: approx. 2500kg. The machine shows general oil leaks, the motor is missing, and the radial piston pump is presumably defective. 3) Demag Ergotech Concept 1000/420-310, year of manufacture: 2000, screw diameter: 32mm. The end plate of the machine is cracked, and there are small oil leaks. 4) Demag Ergotech System 80-310, year of manufacture: 1996, max. operating pressure: 210bar, screw diameter: 35mm, cores: 1. Including Geiger handling unit. The door interlock is defective, and minor oil leaks are present. Documentation available. An on-site inspection is possible. Rjdpfx Aoxn S Tpeg Aech

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 1,300 mm, cutting width (max.): 1,300 mm, overall weight: 9,000 kg, workpiece weight (max.): 8,000 kg, saw drive: 11,000 W, The OBS1300 bundle cutting saw has been developed to optimize production in terms of time and efficiency when formatting material to the desired length. The presented machine is available immediately—viewings are welcome. Technical specifications: • Maximum bundle dimensions (width/height): 1300 x 1300 mm • Minimum bundle dimensions (width/height): 800 x 800 mm (hydraulic clamp operating limit—smaller bundles can also be cut) • Additional equipment enables cutting bundles with a minimum length of 600 mm • Maximum cut-off bundle length: 3000 mm • Maximum feed bundle length: 6000 mm • Maximum bundle weight: 8,000 kg • Cutting accuracy: +/- 2 mm • Dedicated guide lubrication unit • GB TITANIUM cutting guide (rigid and robust, milled from a single steel block. Backward compatible with STHIL guides*) • STHIL RM404 cutting chain • 11 kW WEG guide drive motor • Fast measurement system with absolute encoder (retains position memory after power loss) and 0.2 mm positioning accuracy • Innovative strapping unit with intelligent system determining strapping point based on preset cut lengths • System of three sets of hydraulic clamps • Hydraulic system built using PONAR components • Crosswise infeed conveyor for loading bundles onto the machine • Intelligent unloading system with crosswise chain conveyor • Two pairs of tilting rollers (hydraulic) allowing large offcuts to freely fall onto the conveyor • TA DRIVE geared motors • HIWIN linear guides with increased load capacity • YHY Japan bearings • YASKAWA inverters and servomotor • 21-inch touchscreen operator panel • SIEMENS PLC controller (with remote access system) • Safety system and SICK brand sensors Warranty: 12-month warranty. Service response time: 24 hours. Spare parts and consumables warehouse. Machine supplied with: • Operating manual • Declarations of conformity • Warranty card • Electrical diagrams Rcjdpfexn Rt Usx Ag Ash • Hydraulic diagrams

Condition: used, Year of construction: 2015, For sale: Complete robot milling cell with ABB IRB 4400, year 2015. The cell was built and commissioned in 2016 by RobMaxx (robot-machining.de). Usage: Exclusively used for milling prototypes from soft foam Very low operating hours: approx. 2,000–3,000 h Scope of supply: - ABB IRB 4400 robot, year 2015 - Control panel - Control cabinet for the robot, automatic tool changer, air supply and extraction system, including cooling air conditioner - Cell constructed from aluminum profiles with double windows (presumably plexiglass) - ESTA 81200 EUROSOG-I-D ATEX extraction system, year 2016 - 360° aluminum rotary table - Robot base/table constructed from aluminum profiles with a fully machined aluminum plate (leveled with adjustable feet) - Automatic tool magazine for 22 tools - High-speed spindle 36,000 rpm by DIEBOLD, liquid-cooled with air support - Complete documentation - Invoice with 23% VAT or intra-community delivery (0%) Condition: Inspection required Damage: Display – F Rcedjxn Dgbepfx Ag Ajh Price: €28,999 Pickup location: 58-500 Jelenia Góra, Poland Invoice available

Condition: new, Year of construction: 2025, -TFON Lite SURFACER® Series The TFON Lite SURFACER® Series enables simultaneous processing of multiple parts, offering unmatched versatility through a range of consumable options and an efficient vacuum table system. Designed for ease of use, it features quick brush changes and the capability to mount two different brushes tailored to your specific applications -With brushes mounted parallel to the table, the system guarantees flawless grinding performance with every use. Ergonomically engineered, the motor weight is supported by the machine frame itself, significantly reducing operator fatigue and improving workplace safety -Backed by TFON’s trusted guarantee, the SURFACER® Series strikes the perfect balance between minimizing operational costs and maximizing finish quality Key Specifications: -Minimum Material Size: 80 × 80 mm. Material Thickness: 3 – 200 mm. Rcedpfsqzxhyox Ag Ash Maximum Material Width: 800 mm. Maximum Material Length: 500 mm.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0803024, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm Rcedpfxsv Tzw Ej Ag Aeh - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: used, Year of construction: 2007, Mazak Nexus HCN 6000-II Twin Pallet Horizontal Machining Centre. S/No. 196442 (2007) with Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, 60 Position ATC, High Pressure Coolant & Filtration System, Through Spindle Coolant, Spindle Speed 7000rpm, Spindle Taper CAT40, Rinishaw Tool Setter, Swarf Conveyor. Please Note: Back-End Spindle Tool Holders Only, Consumable Tools Not Included. Country of Origin: Japan Rcedpfx Asxnl Adsg Aoh Location: This lot is located in Bornago, Italy. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, mount diameter: 30 mm, total height: 1,800 mm, total width: 950 mm, total length: 2,000 mm, table width: 120 mm, table length: 420 mm, Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Tool holder: presumably SK 30 Max. tool clamping length: 35 mm Table dimensions: 420 x 120 mm Redpfxsw Ivu Es Ag Ajch With 2 T-slots and a special EMCO vise Jaw width: 60 mm Travel paths: X: approx. 300 mm Y: approx. 300 mm Z: approx. 200 mm Includes matching mobile workbench with various compatible contents Includes 7-position tool changer, collets, and various suitable tool holders

Year of construction: 2003, condition: excellent (used), machine/vehicle number: 5479, REF: MM6231 Weighing and bagging system which has previously been used to pack 1.8kg and 2kg bags of grated cheese, comprising of: 1 x Bilwinco A/S 14-head weigher fitted with dimple pans and PLC control panel. Technical specification ⚙️ ✅ Model - BW114-W. ✅ Serial number - 5479. ✅ Date of manufacture - 2003. ✅ Weighing range - 10g to 1000g, per drop. ✅ Electrical requirements - 400 V / 50 hz / 3 phase. ✅ Power - 10 Amps. ✅ Compressed air - 8-10 bar. 1 x Stainless-steel purpose-built gantry structure. Overall dimensions - 1750mm long/deep x 2320mm wide x 3500mm high. 1 x Sandiacre Packaging Machinery Limited vertical form, fill and seal bagging machine with Allen-Bradley touch-screen control panel and supplied with 2 x forming tubes. This machine has vacuum and gas-flush sealing functions. Technical specification ⚙️ ✅ Model - TG400LDK. Rcjdpexnivuofx Ag Aeh ✅ Serial number - 2607. ✅ Date of manufacture - 2000. ✅ Sealing jaws - Vertical: 540mm & Horizontal: 420mm. ✅ Maximum bag width - 400mm. Previously running a 592mm wide film. ✅ Forming tubes - 180mm diameter to form bag 240mm wide. ✅ Footprint of system - 2500mm long/deep x 2320mm wide x 3600mm high. NOTE: This system has recently been serviced, with new chains, belts and other consumables fitted at a cost of approximately £6,000.

Condition: excellent (used), Duplo 150 Digital Booklet System Location: Glendale, UK Availability: In stock Condition: Refurbished by trained engineers – Excellent condition, perfect working order. Overview The Duplo 150 Digital Booklet System is a compact, modular solution designed for low to mid-volume digital print finishing. This complete configuration includes the DSF-2200 Sheet Feeder, DBM-150 Booklet Maker, and DBM-150 Trimmer, delivering high-quality booklets with speed and reliability. Producing finished sizes from A6 up to A4, as well as custom sizes between 320 × 460 mm and 120 × 210 mm, it offers flexibility and professional results in a space-saving footprint. Capable of producing up to 2,400 books per hour, it is the perfect near-line solution for today’s digital printer. Key Features Produce booklets from A6 to A4, plus custom sizes. Handles up to 25 sheets (100 pages) per booklet. User-friendly PC controller with job recall and automatic set-up. Two feed trays for combining different media types. Job integrity assurance for accurate, error-free production. Fast operation with up to 2,400 books per hour. Complete System Includes DSF-2200 Sheet Feeder – High-capacity dual tray feeder with five different feed modes for maximum flexibility. DBM-150 Booklet Maker – Compact, fully automatic booklet maker with precision folding and stapling. DBM-150 Trimmer – Integrated fore-edge trimming for clean, professional edges on every booklet. Why Choose the Duplo 150? Ease of Operation – PC-controlled setup with automated adjustments for quick job changeovers. Flexible Production – Handles a wide range of sizes and stocks, ideal for digital workflows. Compact Design – A space-saving system combining feeding, folding, stapling, and trimming in one modular unit. High Efficiency – Continuous production of up to 2,400 booklets per hour with no wastage. Upgradeable System – Modular design allows additional Duplo devices to be added as business needs evolve. Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established and trusted supplier – years of experience in print finishing solutions, providing both new and used printing equipment. Specifications Manufacturer Duplo Model 150 Redpfx Aow Tmy Nog Aoch Stock Number 114956 Max sheet size 320 x 460mm Min sheet size 120 x 210mm Max booklet capacity 25 sheets (100 pages) Max speed 2400 sets/hour Staple heads Heavy duty Isaberg Rapid R952 Stapling width Adjustable - 70, 108, 160, 258 & 276mm Paper type Fine quality: 64 to 127.9gsm, Art/Coated: 104.7 to 127.9gsm Cover: Fine quality, Art/Coated within 300gsm DSF-2200 Sheet Feeder Specifications: Feeding System Belt suction, top feed, air separation User features Ultrasonic double sheet detection, hand feeding, active anti-static bar Paper capacity 200mm and 60mm in each tray System power requirements 240v 50HZ Full system weight 260kg Full system dimensions W2540mm x D750mm x H840mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, overall weight: 300 kg, type of input current: AC, warranty duration: 12 months, input voltage: 220 V, total width: 1,300 mm, total length: 1,000 mm, total height: 2,000 mm, input frequency: 50 Hz, The MOPA Fiber Laser Marker LMM0019, 80W, is an advanced solution for marking, engraving, and cutting metals and plastics. Thanks to its high power and large working area of 300x300 mm, it is ideal for industrial applications requiring precision, speed, and efficiency. Key Features ✅ 80W laser power for deep marking and precise engraving. ✅ Large 300x300 mm working area, perfect for processing large components. ✅ Autofocus with dual laser pointer and motorized Z-axis for fast, accurate adjustments. ✅ Manual safety enclosure ensures user safety and easy operation. ✅ Air-cooled—no complicated maintenance procedures required. ✅ Supplied with EZCAD software and a computer for comprehensive and intuitive control. ✅ Standard 220V, 50 Hz power supply, compatible with industrial environments. Suitable Materials 🔹 Metals: stainless steel, carbon steel, aluminum, copper, brass, titanium, silver, gold. 🔹 Metal alloys: magnesium, zinc, and other treated materials. 🔹 Industrial plastics*: ABS, PVC, PE, PP, HDPE, PC. 🔹 Anodized, painted, and plated surfaces*. Applications ✔ Industrial marking of QR codes, logos, serial numbers, and texts. ✔ Deep engraving on metal for nameplates and mechanical parts. ✔ Product customization on metal and plastic surfaces. ✔ Permanent marking on tools, electronic components, medical devices. ✔ Sheet metal cutting up to 1.5 mm thick. Advantages of Fiber Laser Technology 🔹 Indelible marking, resistant to solvents, abrasion, and high temperatures. Rcsdpfexna Syex Ag Aeh 🔹 Exceptional precision with detail as fine as 0.02 mm. 🔹 Non-contact process prevents tool wear. 🔹 Low operating costs—no consumables or frequent maintenance required. 🔹 High processing speeds optimize industrial productivity. Technical Specifications Laser power: 80W Laser type: Fiber Wavelength: 1064 nm Working area: 300 x 300 mm Focusing: Dual laser pointer, motorized Z-axis Manual safety door: Yes Cooling system: Air Power supply: 220V, 50 Hz Software: EZCAD included Computer: Included Available on request ✔ Rotary axis D69 for cylinders up to 69 mm in diameter ✔ Fume extraction system (always included) ✔ Precision clamp for marking irregularly shaped objects *Preliminary testing on a minimum area is recommended for each new material. Weight 300 kg Length 1300 mm Width 1000 mm Height 2000 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, CNC Plasma Cutting Table – Working Area 1500 × 3000 mm – with LGK-120IGBT Plasma Source (2019) Type: CNC plasma cutting table Model: CC-1530 Working range (X × Y): 1500 × 3000 mm Drive: rack and pinion drive (X/Y), motorized Z-axis Zero position setting: automatic height-following sensor (torch height control) Table type: dry table with steel slats Power supply: AC 220 V / 50 Hz Year of manufacture: December 2019 Plasma Source Brand / Type: LGK-120IGBT System type: inverter air plasma source Cutting current: 20 – 120 A, steplessly adjustable Cutting capacity: Steel up to approx. 25 mm Stainless steel up to approx. 20 mm Aluminum up to approx. 15 mm Rjdpoxmvixefx Ag Aoch Gas supply: compressed air 5 – 6 bar including various consumables

Condition: used, mileage: 159,800 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: mechanical, overall weight: 5,000 kg, first registration: 09/2016, next inspection (TÜV): 11/2025, loading space length: 3,450 mm, loading space width: 1,880 mm, loading space height: 1,510 mm, loading space volume: 10 m³, emission class: euro6, color: white, number of seats: 3, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, No. 57 - You will find this and many other inspected Mercedes Benz vans on our homepage: ----Mercedes-Benz Sprinter 516 CDI, EURO 6, Frigopan refrigerated box with Thermo King V300 Max cooling unit. Temperature range -22°C / +20°C. Very robust vehicle with a high payload of 2,150 kg. Drive and stationary cooling are available. The vehicle is in good visual and technical condition. HU/AU (TÜV) valid until 11/2025. Permissible total weight: 5 t, Unladen weight: 2,850 kg, Payload: 2,150 kg.----The refrigeration is running but does not cool down to the set temperature. Presumably, there is too little refrigerant in the system. Cause unknown.----The box stands out for its sturdy and practical construction (reinforced front wall, rear doors, side doors right and left, aluminum floor with collision protection). ----The vehicle is from the first owner, has a complete service history, and is in good visual and technical condition. The service was carried out at KM 47, 104, 134, 151.----Permissible total weight: 5 t Unladen weight: 2,850 kg Payload: 2,150 kg Cargo area LxWxH in cm: 345 x 188 x 151 Emission class: EURO 5 Long wheelbase: 3665 mm VIN: WDB9061531N663635 All-weather tires 2 keys ----* Mercedes-Benz Sprinter 516 CDI in good condition * Deep-freeze box * Frigopan refrigerated box * Thermo King V300 Max cooling unit, deep freezing down to -22°C * Temperature recorder * Drive and stationary cooling * Tachograph * Cruise control * Lane keeping assistant * Becker Map Pilot navigation system * Reinforced stabilizer at front, reinforced front axle * 3 seats Rjdpfxjwtcfpo Ag Ajch * Audio system Audio 15 * Electric windows * Electrically adjustable exterior mirrors * Airbag * Central locking ----Errors, modifications, and prior sale reserved. Special Equipment: 1 DIN slot at the front under the headlining, Audio system Audio 15 (radio with color display), exhaust before rear axle left, outside temperature display, single-pole battery disconnect switch, roof control unit with reading light on driver/passenger side, digital tachograph, downloadable, 180 A generator, folding lid for storage compartment, fuel filter with water separator, front PTO with bracket for additional coolant compressor, Becker MAP Pilot navigation system, spare wheel Super-Single tires (235/65 R16), spare wheel holder under the end of the frame including jack, front mud flaps, seats in cab: passenger double seat, seats in cab: driver's comfort seat, reinforced front stabilizer, rear wall lining, fleece battery 95 Ah, heat protection glazing (windscreen with top band filter) Additional Equipment: Adaptive brake light, driver's airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors, both, exterior mirrors with integrated indicator, battery 74 Ah, brake assist, braking system with ABS+ASR, roof lining in cab, driving assistance system: lane keeping assistant, lockable glove compartment, body/construction: platform, fuel tank: main tank 75 liters, headlight range adjustment, truck registration, model update, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker package, tires 285/65 R16C super-single tires on rear axle, low emissions according to Euro 6 emission standard, seat belt system with warning device (driver's side), seat cover/upholstery: fabric Lima, seats in cab: adjustable passenger seat, service interval indicator Assyst, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle

Condition: used, This listing is for a Belimed PST 9-6-12 HS1 Steam Sterilizer. The unit is in excellent working condition and is ready for immediate release. The Belimed PST 9-6-12 HS1 is a top-of-the-line pharmaceutical autoclave designed for saturated steam sterilization of laboratory and production equipment, including heat- and moisture-stable porous and non-porous loads. This advanced stainless steel sterilizer supports the 6050 and 6065 sterilization processes with integrated Filter Integrity System (FIS), ensuring reliable sterilization and validation compliance in regulated environments. Engineered by Belimed Life Science and manufactured in Germany, this system delivers high process reliability, precise temperature control, and full compliance with GMP/cGMP standards, making it ideal for use in research, pilot, and GMP production settings. This HS1 configuration features a single-door chamber, water-jacket cooling, vacuum-assisted drying, and a user-friendly B-Touch interface with integrated process control. It is optimized for efficient sterilization cycles with minimal operator intervention. Key Features GMP-ready design supporting pharmaceutical-grade sterilization processes (6050/6065) Integrated Filter Integrity System (FIS) for monitoring and verifying sterilization filter integrity User-friendly B-Touch touchscreen interface with Siemens WinCC Unified or Rockwell FT Optix Water-jacket cooling and vacuum drying ensure rapid cooling and effective drying of chamber loads Single-door HS1 configuration optimized for ergonomic loading and unloading High-quality AISI 316L stainless steel construction with hygienic surface finishes (Ra < 0.8 µm) Automated operation with redundant sensors and independent measurement circuits for reliable sterilization Compliance with GAMP5, 21 CFR Part 11, Annex 11, and optional ASME BPE certification Supports modular accessories including trolleys, batch carts, perforated or wire-mesh shelves, and cleanroom integration Technical Specifications Rjdpfxexmi Hqj Ag Aoch Manufacturer: Belimed Life Science (Germany) Model: PST 9-6-12 HS1 Sterilization Processes: 6050 / 6065 (Steam, Pre-Vacuum, Gravity) Filter Integrity System (FIS): Yes Chamber Dimensions (W × D × H): 1030 × 600 × 1380 mm Usable Chamber Volume: 710–850 L External Dimensions (H × W × D): 1940 × 2150 × 1710 mm Weight: Approximately 1,010 kg Chamber Material: AISI 316L Stainless Steel Surface Finish: Ra < 0.8 µm (≤ 0.6 µm optional) Door Type: Single-door HS1 Loading Type: Ground loader (GR) Cooling System: Water-jacket cooling Vacuum System: Integrated water-ring vacuum pump with optional water recovery Control System: B-Touch interface with PLC Electrical Supply: 400 V / 50 Hz (other voltages optional) Compliance: GMP / cGMP, 21 CFR Part 11, Annex 11, ASME BPE options Year of Manufacture: Available on request Serial Number: Available on request Applications Sterilization of laboratory glassware, stainless steel equipment, and porous loads in biopharmaceutical production Small- to medium-scale pilot manufacturing with validated sterilization cycles GMP production environments requiring full regulatory compliance Sterilization of equipment used in vaccine, gene therapy, and biologics research Microbiology laboratories for culture media, instruments, and consumables Benefits Scalable and reliable for pilot and full production batches Validated sterilization with integrated FIS and redundant sensors ensures reproducible cycles High-...

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck 1 piece used, very well-preserved Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical diameter 150 mm, supplied with chuck key and a set of hardened stepped jaws, as well as the assembly and operating manual for the Horvath eccentric clamping chuck in what is presumably the original wooden case (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces in a lathe. Rjdpfjg Umb Esx Ag Asch Price / details on request. All technical details are subject to error or typographical mistakes. Sales exclusively to countries within the European Community.

Condition: excellent (used), Inkjet printer Videojet 1520/1560/1630 Rcedpovmdw Uofx Ag Aeh various types Type 1520 Type 1560 Type 1630 various consumables available (1 pallet) 25 pieces in total!!! Very good condition, straight from production!!!

Condition: new, 0 300 mm 0 max./nom: 6.000/5.085 m³/h 0 v.V./nom: 2.950/2.400 Pa pa Filter capacity 36,2 m² m² weight ca. 1.300 kg Dimensions (L/W/H) 3.880 x 1.020 x 2.250 mm Rcsdpou Uvarefx Ag Aeh Dust extractor NE-J 300 3 ton. m. Jet filter regeneration ----- Including a new type of extinguishing device with a drop flap and oxygen extraction, 5 m cable for junction box, high-efficiency reluctance motor IE5, FU control, Wired 7" color touch panel, automatic start/stop start control and monitoring of up to 10 woodworking machines included automatic slide control, integrated emergency stop function and is of course H3 tested. The newly designed model fits into any standard shipping container. The suction nozzle with injection box and non-return flap is located in the middle of the front dust extractor. The highly efficient JET filter regeneration guarantees high Filter service life, low filter resistance and therefore high suction performance. The dust bins each have 4 swivel castors and a viewing window Fill level control and with an inserted sturdy chip collecting bag fitted. Technical data / manufacturer description ----- • Volume flow max./nom.: 6,000 / 5,085 m³/h • Operating volume flow: 7,500 m³/h • Negative pressure v.V./nom.: 2,950 / 2,400 Pa • Suction side connection: Ø 300 mm • Operating mode: continuous operation • Type of current: three-phase current 400 V / 50 Hz • Power consumption: 7.5 kW / 18.5 A • Fan / drive: IE5, FU controlled, high-efficiency reluctance motor • Filter area: 36.2 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 liters. • Chip disposal: Chip bin with PE bag • PE bag (consumables): Item no. 500020 • Collection volume 3 x 0.16 m³ • Weight: approx. 1,300 kg • Noise value according to EN 11201: 72-74 dB(A) according to MRI (+/- 4dB) • Depth x width x height: 1,020 x 3,880 x 2,250 mm Necessary connections: • Compressed air standard coupling NW 7.2; 6 bar, dry compressed air and oil-free • 1 x junction box/sub-distribution/backup fuse 25 A In systems with a chip bag filling, due to different reasons Suction volume and differing chip/dust proportions ensure a uniform Filling cannot be guaranteed. ----- -- Total price: On request! Assembly according to effort - on request! ----- -- (Technical information provided by the manufacturer is not guaranteed!)

Condition: like new (used), functionality: fully functional, machine/vehicle number: D32070, Year of construction: 2021, operating hours: 41 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: DC, overall weight: 227 kg, input voltage: 220 V, Equipment: CE marking, For sale: Stratasys F370 (F123 Series) FDM Printer + SCA 3600—perfect for reliable, office-friendly production of functional parts, jigs & fixtures, and engineering prototypes. Package includes a substantial assortment of new, unopened consumables and print heads, as well as a Stratasys SCA 3600 support removal tank—allowing immediate, long-term operation. Key Features - Technology: FDM with soluble QSR support - Build Volume: approx. 355 × 254 × 355 mm (14 × 10 × 14 in) - Supported Materials (depending on print head): PLA, ABS, ASA, elastomers, ABS-CF10 - Supports soluble support material removal (NaOH/QSR) Includes (ALL supplied with the printer): Support Removal / Chemistry - 7× Stratasys sodium hydroxide (NaOH) boxes, ref 300-00600 - 1× QSR soluble support spool - 1× Stratasys SCA 3600 support removal tank Material Spools (all new) - 7× PLA Translucent - 1× PLA Light Blue - 1× ASA Yellow - 1× ABS Black - 1× ABS Yellow - 1× ABS Ivory Build Trays - 6× Standard build tray cartons - 1× High-temperature build tray carton Print Heads (all new) - 7× PLA Cooling heads - 4× PLA Extrusion heads - 4× Support/Model heads - 1× Elastomer head - 1× ABS-CF10 head Also included - Original accessories and cables - [User manuals / maintenance kit / crate—if applicable] - Test print prior to collection possible Rcedsxk Tbgspfx Ag Aoh Logistics - Inspection: By appointment - Shipping: Palletized shipping available at buyer’s expense, or local collection possible - Payment: Bank transfer (invoice provided) Why choose this unit? A meticulously maintained F370 supplied with a rare, extensive set of build trays, print heads, and materials—covering PLA, ABS-CF10, elastomers, and more—plus the SCA 3600 tank for efficient soluble support removal. Minimize downtime and consumables lead time from day one.

Condition: used, Univ. Swivel-Tilting-Rotary Table, presumably DECKEL Universal accessory table for tool milling machines Machine No.: 33.04.07 Univ. Table No.: 09.01 Table size: 700 x 400 mm T-slot width: 12 mm T-slot spacing: 45 mm Mounting plate: Width 550 mm x Height 300/240 mm - Table plate with 8x T-slots 12 mm - Table plate can rotate 360° with 7.5° index, swing-away worm for direct dividing Rodpfx Aeh Ecm Iog Ajch - Hand crank with indexing plate and sector arm, built-in division plate 16-30-33-36-39-51-57-63 - +/- 45° tiltable to either side - 15° forward downward tilt, 45° upward forward tilt Weight: 260 kg In good condition

Condition: ready for operation (used), center height: 175 mm, grinding length: 600 mm, ★ TOP maintained machine from the liquidation of a renowned toolmaker – be sure to check our other listings as well ★ ★ KELLENBERGER 600U-175 internal and external cylindrical grinding machine with extensive accessories ★ Year of manufacture: Presumably 1987 Machine number: 32.467.2987 Condition: Not tested Delivery terms: Free loaded on truck – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – The items must be collected by the buyer in calendar week 49 / 2025 without exception. The specific date will be determined by us. Earlier availability may be possible upon agreement. Payment terms: Advance payment by bank transfer Internal no.: JO8 Under power for inspection: YES ⚙️Technical data Centre distance: 600 mm Centre height: 175 mm Maximum workpiece diameter: 349 mm Max. grinding wheel dimensions: 400 x 50 x 127 mm Motor power (grinding spindle): 3 kW Grinding spindle speeds: 1500 / 1700 / 2200 rpm Workpiece headstock speed: Infinitely variable 20–400 rpm Total power requirement approx.: 6 kW 380 V / 50 Hz / 10 A With internal grinding device With very extensive accessories as shown in photos Further data can be found in the pictures Scope of delivery Available manuals Very extensive accessories as per pictures Dimensions & weights Installation dimensions L x W x H approx.: 2500 x 2000 x 1600 mm + accessories on pallets Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️ Be sure to check our other listings as well ⚠️ Additional notes: Rcjdpfxexiy N Uo Ag Ash ► We expressly recommend collection via direct transport (haulage company) ► The goods are sold excluding any warranty ► Technical data without guarantee ► Subject to prior sale ❗ The goods are exclusively sold to business customers ❗

Condition: like new (used), Year of construction: 2018, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 568746, overall weight: 1,068 kg, load capacity: 210 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, input voltage: 400 V, type of input current: AC, Details about the robot: Year of manufacture: 2018 Operating hours: Only 0.6 hours Condition: As new, flawless Rcodpfxjwtx Ims Ag Ash Model: Kuka KR 210-2700 Extra Inspection & Test: The robot can be inspected and tested on site at any time. This robot is ideal for applications demanding the highest precision and reliability. It has been carefully stored and is in impeccable technical condition. Note: Sale as a used consumable machine with exclusion of any liability for material defects.

Condition: used, This listing is for the Watson Marlow 620 Du/R Peristaltic pump The unit is in full working condition and is ready for immediate use The 620DU is a process peristaltic pump (i.e. hose pump) designed for metering, dosing, and transfer of fluids. Because it is a peristaltic design, the fluid is contained entirely within the tubing, avoiding contact with internal moving parts (other than the tubing). It is suitable for remote control, automation, and integration into control systems (SCADA, factory logic, etc.). Wide control range & precision: The large turndown (2,650:1) gives flexibility to handle both very low and high flow rates with fine control. Rcedpfexhdt Iex Ag Aeh Remote / automation capabilities: Because it supports analog and digital interfaces, it’s well-suited for integrated systems. Pump protection & security: PIN locking helps avoid unintentional changes in process-critical applications. Low maintenance on non‑wetted parts: Since only the tubing contacts fluid, mechanical wear is mostly on the tubing, making part replacement simpler. Safe to run dry: Peristaltic pumps typically tolerate running dry without damage (unlike many positive displacement pumps). Reversible / ability to back‑flush: This is helpful when attempting to clear lines or avoid clogging. Limitations / Considerations Tubing wear / life: The hose or tubing is the consumable component. Chemical compatibility, pressure, and mechanical stress affect how often tubing needs replacement. Upper pressure / flow limit: While it handles decent pressure (~2 bar standard, possibly up to 4 bar variant), it’s not suited for very high-pressure pumping tasks. Enclosure limitations (non-“N” model): The standard 620DU is not fully sealed, so it may not be ideal for wet or harsh environments unless you use the “N” variant. Cost / complexity: More features, interfaces, and protection can make the system more complex (and costlier) to configure, install, and maintain.

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° Rsdpfeupxupjx Ag Asch • Frequency-controlled saw drive • 34 mm saw band height • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, Year of construction: 2023, functionality: fully functional, cutting width (max.): 600 mm, cutting length (max.): 1,300 mm, stack height: 1,300 mm, Equipment: documentation/manual, The P60 is a small format Hot Wire Cutter designed to cut EPS and XPS polystyrene sheets while keeping the footprint of the machine to a minimum. The P60 is suited for Sign Makers and businesses who manufacture 3D products including Decorative Facias, Letters and Logos. Key Features - 2-axis CNC Contour cutting system. - 600mm Working Width. - Available in 3 modular sizes up to a maximum cutting length of 3050mm. - Supports High Strength Titanium wire available from 0.15mm in diameter. - IXshaper Windows software to operate the machine and prepare cutting files. - Auto-stop and resume feature during a wire break. Additional Options - Turntable – Rotating plate used for making 3D products. - Lathe – Horizontal rotation feature used to make round objects such as columns and balusters. - Shapewire Bar – Uses a 1mm diameter wire which can be shaped to any custom design. - Handheld Controller to provide machine status and position. P60 Technical Data Processable Materials: EPS Polystyrene, XPS Polystyrene Software: iXshaper – Lifetime Updates Compatible File Formats: DXF, HPGL/PLT, RAW 3D, PS/AI Maximum Move Speed: 47 mm/Sec Available Wire Diameters (mm): 0.15, 0.25, 0.30, 0.35, 0.45, 0.55, 0.6 Power Requirement: 230v, 50hz Windows Compatibility: XP, Vista, 7, 8, 10, 11 Rcodpjup Epaofx Ag Aeh PC and Monitor: Optional Warranty: 5 Years - Excluding Consumables

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings Rcodpfxofgyice Ag Aeh · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use