Used Sumab for sale (205)

Condition: new, BEST PRICE OFFER!!! Rcsdpfx Aget Ertqowjh Wholesale KODAK spare parts and consumables for Digimaster and NexPress. Vast majority of spare parts and consumables are new and sealed. Please consult the available quantities and codes as attached in pdf format. Potential clients must notice that the sale is bulk, not retail.

Condition: used, 3-jaw wedge bar chuck, presumably RÖHM or SCHUNK Equivalent to Forkardt F315 or SMW Diameter: 318 mm Inner diameter: 85 mm Chuck flange: short taper DIN 55022 size 8 1 set of chuck jaws consisting of base jaws and hard stepped top jaws Rjdjw Dvv Nopfx Agwech 2 sets of chuck jaws consisting of base jaws for mounting top jaws Weight: 100 kg Good condition

Year of construction: 2004, condition: good (used), machine/vehicle number: 018002 , 4 Pockets 1 Knife 1 Side Pocket Screen Display Double Sheet Control - electronic Stream Delivery Technical Details: Redpfxofh Nqre Agwjch Largest Sheet Size X : 530 mm Largest Sheet Size Y : 750 mm Min. Sheet Size X : 120 mm Min. Sheet Size Y : 172 mm Production Capacity Max : 230 m/min Technical data can vary according to job, consumables and possible other factors

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Rcedpfoxqnvrjx Agwoh Further questions can be answered by phone.

Condition: used, Year of construction: 2018, tank capacity: 500 l, Location: Bremen Condition: unused Volume: 500 liters Tank Max. operating temperature (tank): 150°C Max. overpressure: 6.0 bar Vacuum: 1.0 bar Tank Specific weight of medium (t/m³): 1.2 t/m³ Bottom: dished end Top: bolted lid Design: suspended Tank Support type: bracket feet Heating/cooling: available Double jacket volume: 88.0 liters Max. permitted operating overpressure: 10.0 bar Heating/cooling jacket Max. permitted operating vacuum (double jacket/tube space): 1.0 bar Max. permitted operating temperature: 150°C Cylindrical temperature control: half-pipe coil Insulation: present Insulation Insulation jacket: hermetically welded Jacket material: stainless steel Insulation thickness: 50 mm Internal diameter: 780 mm External diameter: 960 mm Cylindrical height: 1,015 mm Technical data / dimensions Bottom wall thickness: 6.1 mm Cylinder wall thickness: 8.9 mm Technical data / dimensions Top wall thickness: 4.3 mm Year built: 2018 Technical documents: drawing, TÜV certificates, acceptance certificate, CE marking and declaration of conformity, operating manual Features Manhole/dome: handhole Nameplate: Features: spray head, crane lugs Features Outlet: available Remarks: Complete documentation according to pharmaceutical industry standards included in the scope of delivery; the apparatus was manufactured for a global pharmaceutical company but never commissioned; handhole with sight glass, diameter: 285 mm Product contact material: V4A 1.4539 (AISI316) Agitator Agitator manufacturer: Zeta GmbH Power: 0.37 kW Speed: 408 rpm Agitator: magnetic agitator Agitator Voltage: 230/400 V Rcedpfx Agexqanmjweh Agitator position: on the bottom Agitator features: magnetic agitator, presumably speed adjustable via an external controller (not included) in the range 75 - 500 rpm

Condition: new, mileage: 3,929 km, power: 235 kW (319.51 HP), first registration: 11/2024, overall weight: 18,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 10,300 kg, empty load weight: 7,700 kg, next inspection (TÜV): 11/2025, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, trailer coupling, Vehicle location: Bovenden, registration pending, 1x comfort seat, electric mirrors. Wheelbase: 4200 mm. Allison 3000 automatic transmission, 6-speed, fire service driving program, Allison retarder, additional Duo-Matic quick coupling at rear chassis. 3-point static safety belt for middle seat, side camera system (SCS), separate display on A-pillar, engine-dependent PTO type CH870-G with flange, ratio 1.77 top mount, engine-dependent PTO type CH870-D without flange, ratio 1.21 side mount. Permissible gross train weight 33,000 kg (Tech. Plus), rear axle leaf suspension, parabolic, 4-leaf, steel. Parking brake with spring accumulator on rear axles (incl. VLA/NLA). Interior styling matching color scheme, MAN EasyControl engine control panel with 2 functions, operable from outside with open door. Stationary regeneration for catalyst, can be performed at any time, suitable for low-load applications. Coolant connection for external consumers. Heated fuel filter, suitable for fuels up to cleanliness class 21. Front detection, can be deactivated. Traffic sign recognition. Standard entry handles. Engine with onboard diagnostics OBD-E. MAN D0836 LFLBL diesel engine, 235 kW (320 hp), 1,250 Nm torque, Euro 6e. Stone guard for front headlights, grid coarse and fine mesh. Rear axle HP-1333, 13,000 kg, AP axle without through drive, straight, non-steered, non-liftable. Interface for advanced signal output (EIO). Tire pressure monitoring system (TPM), including tire temperature display. Trailer coupling on end cross member, RINGFEDER type RF40/G150B. MAN EasyStart roll-off prevention with hill-hold, MAN AttentionGuard driver alert, non-switchable. Generator, three-phase, 28 V, 190 A, 5,320 W, LIN. Interior lights, reading lamps (both sides). Anti-lock braking system (ABS) off-road with extra terrain logic. Electronic Braking System (EBS). High-performance engine brake MAN EVBec, multi-stage. Heated air dryer. Engine oil dipstick and digital oil level gauge. Engine dry air filter with safety insert. Emergency brake signal, automatic warning flasher activation. Emergency brake assist. Additional pneumatic parking brake on front axle(s), consumable. Axle ratio i=6.00. Differential locks on driven rear axles. Differential locks on driven front axles. Warning buzzer for engaged front axle locks. MAN TipMatic Offroad driving program up to 70,000 kg. Flame start system. Viscous fan for engine cooling. Emission standard Euro 6. SCR exhaust aftertreatment. MAN D0836 diesel engine, 6.9 L, common-rail, inline 6-cylinder, 235 kW (320 hp) engine rated output, single-stage turbocharging with charge air cooling. Front towing fill connection. Electric main battery switch. Battery cable extension, 6 m. Air tank, steel. Vehicle rear, straight frame end. Rear axle as planetary axle, permanently driven. Front axle as ... ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Rcsdsw Idz Tspfx Agwoh

Condition: excellent (used), functionality: fully functional, Brehmer Polygraph 39-3/4 thread sewing machine for bookbinding. Includes extensive accessories and consumables. Machine is well-maintained and in very good condition. Comes with manual and complete documentation – very rare. Electrical connection 400V/50Hz. Rjdpexa Afmofx Agwech

Condition: excellent (used), Year of construction: 2022, KRONOS 32 SP machine; • Year 2022. • 4 off 3000x1500 beds (including spare slats); Rcodpfxexqyhgs Agwjh • extraction unit (including ducting); • POLARIS CNC control unit; • consumables (including drill bits); • Hypertherm XPR 300 unit; • full service history; • Technical, maintenance and operational documentation.

Year of construction: 2010, operating hours: 45,000,000 h, condition: excellent (used), machine/vehicle number: 1091, PCS-H Off Press Controls Screen Display PDC-E: Print Density Control Ryobimatic Dampening RPC Semi Automatic Plate Change Baldwin IR/TL Dryer Non-stop Delivery Ink. Temperature Control Grafix: Powder Sprayer Coating System with Doctor Chamber Blade Automatic Blanket Washing Device Automatic Ink Roller Washing Device Automatic Impression Cylinder Washing Device High Pile Delivery Number of Printing Units : 5 Units Number of Coating Units : 1 Coating Unit Print Output Maximum : 15.000 Sheets / Hour Largest Sheet Size X : 520 mm Largest Sheet Size Y : 375 mm Min. Sheet Size X : 100 mm Min. Sheet Size Y : 105 mm Largest Print Format (X) : 505 mm Largest Print Format (Y) : 350 mm Max. Paper Strength : 0,6 mm Min. Paper Strength : 0,04 mm Printing Plate Size : 510 x 400 mm Blanket Size : 541 x 437 mm Blanket Thickness : 1.90 mm Redpjfvvdgofx Agwsch Technical data can vary according to job, consumables, printing stock and, possible, other factors

Condition: used, -Dimensions LxWxH: 750x1520x1430mm Redexqfy Uspfx Agwech -Year: 2006 -Serial number: 1992 -Feed height from floor: 830 mm -Sealing frame - Longitudinal arm: 390 mm -Sealing frame - Cross arm: 490 mm -Noise level: 60 dB -Standby ECO power consumption: 0.3 kW/h -Power consumption for 150 packs/hour: 1.5 kW/h -Maximum product height for consumables: 180 mm -Maximum product weight for consumables: 10 kg -Maximum reel diameter for consumables: 260 mm -Maximum reel width for consumables: 550 mm -Usable films for consumables: PVC, Polyolefin -Voltage: 230 V ADVANTAGES -2 possible working modes as standard -Forward/Backward or Stepless Variable Speed -Armored heating elements -Arranged in a circle around the fan for uniform shrinkage -Strong and balanced ventilation -Ensures efficient heat transfer to the film, resulting in all films shrinking at a lower temperature with shorter exposure time Simultaneous adjustment -Simultaneous height adjustment of the discharge table and tunnel conveyor according to the bundle size: no height difference, better shrinking, and energy savings Silent -Latest generation timed electric motor with low noise emission EQUIPMENT -Bundle placed on a fixed transfer plate -2 electromagnets hold the frame down during the sealing operation -At the end of sealing, the operator pushes the PACK onto the tunnel belt, which moves at a continuous (variable speed) pace -The PACK travels through the tunnel to the exit -Features designed for operator comfort and workstation ergonomics -Adjustable film support depth and feed table -2 working modes available as standard: FORWARD/BACKWARD or CONTINUOUS with VARIABLE SPEED -Height adjustment for the tunnel belt/conveyor -Waste film collection tray -Mobile unit on casters -Sealing device with permanent heat + impulse with adjustment -Electronic thermostat controlling tunnel temperature +/- 2°C -Timed tunnel heating and ventilation -Teflon-coated mesh conveyor belt with guide, 5x5 mm mesh, adjustable speed via frequency inverter -Belt conveyor height adjustable with handwheel for optimal shrinkage (no height difference)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 42,140 h, machine/vehicle number: 082170115104, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, laser hours: 42,140 h, laser power: 4,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, pipe diameter (max.): 120 mm, pipe length (max.): 4,500 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, type of cooling: water, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, type plate available, For sale: Fiber laser for cutting sheet metal, profiles, and tubes – BLM LC5 combo 4000 W. Rodjxqchpepfx Agwsch The laser is fully operational and has been serviced until the end by BG POLSKA – BLM Group. We have two Precitec cutting heads for the laser. One is brand new and installed on the machine; the other is refurbished and kept as a spare. This allows for uninterrupted production in case of a malfunction, as you can simply swap the head. We also have a large stock of consumable parts: nozzles, ceramics, protective lenses, a securely sealed lens replacement kit, supports for tubes and profiles, etc. The laser is being sold due to the construction of a new production hall, which prompted a reorganization of the production line. The machine features automatic nozzle exchanger, automatic centering, and automated tube and profile loading. CNC programming software – Lantek Expert (3 licenses) Year of production: November 2017 I encourage you to see it in operation on-site.

Year of construction: 2023, condition: used, Swivel range: approx. 200 mm, machining length travel: approx. 100 mm, number of axes: 3 axes (X/Y/Z), SIEMENS Sinumerik control, IFS IFMC 1800 air filter unit, year of manufacture: 2021, serial no.: 565760-02, HYFRA E-Chilly 5-400V-S cooling unit, year of manufacture: 2022, serial no.: 10129303PC01240522, cooling capacity: approx. 5,480 m³/32° Celsius, LEHMANN UMT KSS0119 hydraulic unit, year of manufacture: 2022, net weight: approx. 610 kg, comprising: 1 HYFRA TRK-Chilly-45-EF-S cooling unit, year of manufacture: 2022, serial no.: 10132616PC01290722, 1 LEHMANN UMT FB100 chip conveyor, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 80 kg, 1 LEHMANN UMT VMA 100S GM WA magnetic unit, year of manufacture: 2022, serial no.: AUF007093-1, net weight: approx. 60 kg, 1 JOTKEL two-door steel cabinet, contents: various consumables. Rjdsxnah Ujpfx Agwsch

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, Showroom machine from the manufacturer! Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Calendar collating machine Type - MKW RAPID UT - System Belt conveyor table 16 - Number of stations B3 - Format 35 x 50 cm / 13.78" x 19.68" GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 16 stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - Sheet sizes 3.94" x 5.51" up to 13.78" x 19.68" - High-Pile version with max. 70 cm / 27.55" stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Clocked blown air for accurate sheet layering - Electronically adjustable sheet layering - Electronic machine control by Industry-PC system - High quality 15'' color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Delivery control system for criss-cross with adjustable set interval - Transport table lighting with LED-Lamps - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PC - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - LED signal lights to visualise the information of each station SOFU-HIVIS incl. (enables simple status detection) Alternative to Jogger: 1 High-Pile delivery Type MKW RAPID HA 350-UT / PN + T-BELT - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Pneumatic drive unit for staggering of sets - Automatic delivery on to buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Rcjdpour Ih Rsfx Agwoh Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: reconditioned (used), For Sale: EOS P100 – Ready for Immediate Use KNOW WHAT YOU BUY! Fully revised and with warranty! This EOS P100 has been fully inspected and revised, making it ready for immediate use in your production environment. Included in the package: • 2 build frames • Set of hoppers Specifications: • Technology: SLS (Selective Laser Sintering) • Material class: Polymers • Compatible materials: PA2200, PA3200, PA2201, Inframotion PA12, TPU, and more. • Build volume: 200 x 250 x 330 mm • Laser type: Synrad 48-3, 30W CO2 laser • Minimum wall thickness: 0.4 mm Consumables Highlight We offer a wide range of plug-and-play materials, fully tested and optimized for use with EOS machines. Our Inframotion PA12 delivers top performance and provides significant cost savings compared to OEM powders, without compromising on quality. Choose our exclusive materials to drastically reduce your operational costs. Included Services: • Transport & Installation: Safe delivery in original EOS packaging and professional installation included. • Warranty & Maintenance Plans: Flexible options tailored to your specific needs. Rcjdjrm Tdwspfx Agwoh About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in high-quality refurbished EOS SLS machines with comprehensive support. As the only provider offering a complete solution for used EOS equipment, we distinguish ourselves through extensive expertise and unique services. What we offer: • Expert maintenance: Installation, servicing, repairs, and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS machines. • Complete support: From transport to maintenance plans, we handle it all. Trust IM3D for reliable machines, superior materials, and the expertise to optimize your SLS production. Feel free to contact us for more information or inquiries!

Year of construction: 2006, condition: good (used), machine/vehicle number: PL001240 , Thermal CTP (Computer to Plate) Redpfxsfmmyzs Agwoch Throughput option (plates/h in max. format) : 14 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1140 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Condition: ready for operation (used), A wide belt sanding machine (presumably Johannsen) is available. Working width: 150mm, sanding belt length: 7100mm, sanding belt width: 150mm, working height range: 0mm-150mm, table dimensions X/Y: approx. 3000mm/1000mm, sanding belt speed: approx. 20m/s, machine dimensions X/Y/Z: approx. 4000mm/1300mm/1800mm, weight: approx. 1000kg. An on-site inspection is possible. Redpfxjxpw Unj Agwsch

Condition: excellent (used), Year of construction: 2018, operating hours: 21,250 h, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 305 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 820 mm, table width: 840 mm, overall weight: 4,090 kg, table length: 640 mm, A Mitsubishi MV2400R is for sale. Travel: X-axis: 600 mm Y-axis: 400 mm Z-axis: 310 mm U/V-axis: +/- 75 mm Design: 4-sided frame table, hardened with automatic vertical sliding door as a water bath machine Table size: 840 x 640 mm Workpiece size: max. 1050 x 820 x 305 mm Workpiece weight: max. 1500 kg Wire ¯: 0.1 to 0.3 mm for wire spool holder 10 kg Control: MITSUBISHI M800 with 19" full-touch monitor (including handheld pilot with configurable LCD monitor) Closed control loops Min. axis resolution 0.05 μm Generator: H-FS fine finishing generator Digital AE II Generator Rodpswlq Hlofx Agwech Equipment: Tubular drives with linear scales (X/Y/U/V) Handheld pilot with configurable LCD monitor 20 kg wire station Angle Master Advance II Set Consumable parts box Ergolux lamp Corehold function Job planner Filter pump pressure sensor Operating data output Free software update as needed Digital electricity meter / filter pressure sensor Ethernet/DNC/FTP Automation ready McAfee AntiVirus embedded McAnywhere Service 3D CamMagic on board Machine weight: 4,090 kg Installation dimensions: 2687 x 3030 x 2150 mm Option: HIRSCHMANN clamping system (not included in price)

Year of construction: 2023, condition: used, Max. turning diameter: approx. 300 mm, max. spindle speed: approx. 6,000 rpm, power: approx. 26 kW, max. workpiece weight: approx. 300 kg, travel ranges: Z-axis: approx. 350 mm, X-axis: approx. 90 mm, control: SIEMENS Sinumerik 840 D SL, 1 chip conveyor BÄR & CO. GF25L42L-P63, year of manufacture: 2017, serial no.: 61170009, air filter unit IFS M 1600, year of manufacture: 2015, serial no.: 544070-1, net weight: approx. 85 kg, connected load: 400/460 V, 50/60 Hz, 0.75 kW, 1.7/1.5 A, 1 coolant filter unit BÄR & CO. SF 51, year of manufacture: 2018, serial no.: 61180006, cooling unit RKV 4.3 K, year of manufacture: 2018, serial no.: 3-36613, connected load: 400 V/50 Hz, permissible operating pressure: approx. 28 bar, tank capacity: approx. 90 l, cooling medium: water, 1 two-door steel cabinet, contents: various machine tools and consumables Rjdpfsxnakisx Agwsch

Year of construction: 1987, condition: used, Max. Sheet Size X : 760 mm Max. Sheet Size Y : 1020 mm Min. Sheet Size X : 320 mm Min. Sheet Size Y : 460 mm Rcodpeikq Hhjfx Agwoh Production Capacity Max : 35 m/min Technical data can vary according to job, consumables and possible other factors

Year of construction: 2025, condition: used, comprising the following items: Placement unit (594), consisting of: 1 chain conveyor SEB-EURODRIVE, dimensions (W x H x D): approx. 350 x 145 x 60 cm; 1 rail conveyor device TEGEL-TECHNIK (595), carriage dimensions (W x H x D): approx. 130 x 160 x 130 cm, control system SIEMENS SIEMATIK HMI, rail length: approx. 25 m; 1 double hardening furnace PADELTTHERM KEU 1008/400-S (596), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 hardening furnace PADELTTHERM KEU 1008/400-S (597), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 autoclave ALD VACUUM Modultherm (598), year of manufacture: 2022, recorded operating hours: approx. 6,968, max. temperature: approx. 1,250°C, capacity: approx. 4,909 l / 338 l, 1 mobile autoclave unit on rail system, rail length approx. 25 m, ID: 39716; 1 pressure vessel, SABAWERK 47-001310, (599), capacity: approx. 5,000 l, max. allowable pressure: PS-1/40 bar, test pressure: approx. 58 bar, inspection date: 2023, maximum operating temperature approx. 50°C, min. operating temperature: approx. -10°C; 1 pressure vessel SABAWERK 47-001310, max. capacity: approx. 6,000 l, max. allowable pressure: PS-1/9 bar, test pressure: approx. 12.9 bar, inspection date: 2023, serial no.: 20550; 1 gas mixing unit FLUSYS (601), year of manufacture: 2022, comprising: 1 mixing battery FLUSYS type FSP-2030A_01, serial no.: M22111122A, year 2022, 1 compressed air drying unit ESD MK-HP575, year 2022, max. pressure: approx. 45 bar, max. capacity: approx. 575 m³/h; 1 compressed air compressor unit SAUER (602); 1 water treatment plant TECHNOTRANS (603); 1 pressure vessel KOMNINO KPT-10000-40/1.8 (604), year of manufacture: 2023, max. capacity: approx. 10,000 l, max. allowable pressure: approx. 57.2 bar, serial no.: 10054; 1 aluminium platform ladder, 10-steps, FARAONE 300/SN (605), max. load: approx. 150 kg, height: approx. 262 cm, net weight: approx. 35 kg, serial no.: 20230729002; 1 2-door steel cabinet (606), contents: various consumables for the multi-process hardening system. Rcsdpfx Aexnak Ajgwjh

Year of construction: 2011, condition: good (used), machine/vehicle number: PU000567, Thermal CTP: Computer to Plate Rsdpfx Ajfh Dmqogwoch Recording System: External Drum Dual Casette Loader DCL 106: Two Plates With Fully Automatic loading PST 480 B Plate Stacker Technical Details: Throughput option (plates/h in max. format) : 12 Plates / Hour Min. Plate Format : 370 x 323 mm Maks. Plate Format : 930 x 1060 mm Plate Thickness : 0,15 - 0,3 mm Technical data can vary according to job, consumables and possible other factors

Condition: good (used), Year of construction: 2000, Automatic Sheet Feeder Automatic Laminating Unit EK 130/180 Automatic BAT Sheet Seperator Automatic Stacker Max. Size : 1300 x 1800 mm Production Capacity Max : 50 m/min Redeh H Dqhjpfx Agwsch Technical data can vary according to job, consumables and possible other factors

Year of construction: 1991, condition: good (used), machine/vehicle number: 30683 , Flatpile Feeder 4 Pockets 2 Folding Knives 1 Side Pocket Up to 32 pages folding Technical Details: Max. Size : 520 x 800 mm Min. Size : 150 x 210 mm Rsdpfxefh Nqms Agwsch Speed : 40.000 Sheets / Hour Technical data can vary according to job, consumables and possible other factors

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors Rsdpfxefh Dm Nj Agwjch

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Rcedefh Dmzepfx Agwsh Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors