Used Meise for sale (54)

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting Knodpfxob A Rlrj Apmsa -inch thread jaws: 1/4" - 1 1/2" inch -Weight: 8 kg

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Ksdpfxoykud Ds Apmona Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: excellent (used), Scissor roller conveyor Manufacturer: Ameise Tk Article number: 160927 Load capacity: 180 kg Max. length: 1295 mm Min. length: 420 mm 9 rollers Roller diameter: 42 mm x 500 mm Knodpfx Aoymmg Ajpmoa Year of manufacture: 2019 4 swivel castors with locking Continuously adjustable working height from 670 to 940 mm Several units available

Condition: used, functionality: fully functional, Shelf trolley / Transport trolley / Order picking trolley / up to 7 levels / 3 mesh walls / 3 shelves Kedsyw Nthepfx Apmona

Condition: excellent (used), Year of construction: 2017, JUSTSEN/DANSTOKER Heating unit Max Heating output : 1 MW Alloweble pressure : 4,0 bar Alloweble temp : 110 celcius Test pressure : 6.0 bar Volume : 2200 litre Water cooling foundation Can be used for : Wood waste/wood chips/wood pellets etc. Knjdpozr E Hqofx Apmoa Electric cabinet with PLC touch screen Complete unit, still connected to power, can be examined in working condition on demand.

Condition: excellent (used), functionality: fully functional, Krupp/Hydraulic Hammer/Demolition Hammer/Chisel • Quick coupler: CW30, used Kjdpjzi Dnzefx Apmjna • 2 hydraulic connections • Total weight: 1500 kg • Immediately ready for use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2014, * Model: LPE 240 * Year of manufacture: 2014 * Load capacity: 2,400 kg * Weight without battery: 700 kg * Battery voltage: 24V * Charger -----Internal vehicle number: 9106----Subject to errors and prior sale. WhatsApp support available! Knjdjrgmzpepfx Apmea If you have any questions about the vehicle or need further information, feel free to contact us easily via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: defective spare-parts repository (used), Electric pallet truck with tiller, Jungheinrich, Ameise EJE 222 – used, defective battery - : Kjdpfx Apoyzfncomjna Price on request! Manufacturer: JUNGHEINRICH Model: Ameise EJE 222 (defective battery) Serial number: 90106944 Year of manufacture: 2004 Rated capacity: 2,200 kg Unladen weight without battery: 380 kg 24V, 1.5kW Battery weight: 171 / 263 kg Operating hours: 7,255 h Lift height: 130 mm Fork length: 1,150 mm Vehicle weight: 643 kg Condition: good Available: immediately Location: 97828 Marktheidenfeld

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Knodpfxoykuhco Apmja Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: repair required (used), functionality: not functional, Year of construction: 2006, operating hours: 9,455 h, load capacity: 1,400 kg, battery voltage: 24 V, battery weight: 274 kg, Ameise Jungheinrich ERC 214 The pallet truck is currently not operational: Kjdpfx Aey Dg N Hepmsna Drive switch defective, new battery required General terms and conditions for the offer: - 100% payment in advance, net without deduction, before dismantling begins and upon receipt of invoice. - The equipment remains our property until full payment has been received. - The purchaser may withdraw from the purchase agreement at any time in writing and without stating reasons until full payment has been made. - Ex stock location, the buyer is responsible for organizing dismantling, loading, and transport of the equipment at their own expense. - The buyer is responsible for proper dismantling and commissioning. - The buyer undertakes to contract only qualified specialists for dismantling. - Dates must be coordinated with KT and adapted to the plant’s operating hours. - Dismantling must be completed entirely up to the supply lines. - All site safety regulations must be observed. - The equipment is sold as inspected and in its current condition, without any guarantee or warranty for material or cosmetic defects.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 3,817 h, load capacity: 1,200 kg, lifting height: 4,200 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,850 mm, power: 1.6 kW (2.18 HP), gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 24v 3PzS375, battery capacity: 375 Ah, remaining battery capacity: 71 %, battery voltage: 24 V, battery weight: 300 kg, fork carriage width: 560 mm, fork length: 1,150 mm, fork width: 180 mm, fork thickness: 50 mm, overall weight: 1,133 kg, empty load weight: 860 kg, total height: 1,850 mm, color: yellow, Equipment: pallet forks, Jungheinrich EJC 212 Electric High-Lift Pallet Truck. Load capacity: 1,200 kg Fork length: 1,150 mm (standard) Lifting height: 4,200 mm The machine is in good condition, no pending repairs, hydraulics leak-free. Battery serviced and capacity-tested by professional service. Technical specifications: Manufacturer: Jungheinrich Model: EJC 212 Operating hours: 3,817 Year of manufacture: 2019 Load capacity: 1,200 kg Overall height: 1,850 mm Free lift: yes Kjdpfx Apexztbuemena Fork length: 1,150 mm Lifting height: 4,200 mm Triplex mast Battery: 71% remaining capacity, wet cell battery C5 discharge test: 269 Ah at full load for 3:36 h Approx. 7h operating time Includes document holder and integrated charger A higher-performance battery can be installed at extra cost. Net export possible.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 60,837 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 635 mm, spindle motor power: 28,000 W, total width: 1,750 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, number of axes: 4, This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details. - Maximum swivel diameter over bed: 570 mm- Maximum swivel diameter over cross slide: 420 mm- Max. turning length: 635 mm- Bar diameter (main and counter spindle): 65 mm- Chuck diameter (max.): 250 mm- Speed range: 25 – 5,000 min⁻¹- Drive power (main spindle): 28 / 21 kW (100% / 40% duty cycle)- Max. torque (main spindle): 320 / 240 Nm- Drive power (counter spindle): 12 / 9 kW- Spindle bore: 79 mm (spindle bearing 120 mm)- C-axis: Available (for main and counter spindles / C-axis operation)- Control system: Heidenhain CNC Pilot- Machine width: approx. 1,750 mm (without auxiliary units such as chip conveyors)- Operating Hours: 60,837 h- Voltage: 400 V / 230 V / 24 V- Power: 44 kVA- Frequency: 50 Hz- Current: 64 A / 80 A- Included Accessories: 2x jaw chucks, 2x clamping chucks, soft jaws, base jaws, various collets (RD65, RD80, E185, E173, etc.), reduction tubes, chip conveyor (Bürener Maschinenfabrik), cooling unit/filter system, slotting unit (Hub 32), complete documentation manuals Kjdjzvxkdspfx Apmjna Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2004, operating hours: 18,504 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 110 mm, overall weight: 20,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D Powerline, number of axes: 7, This 7-axis DMG Gildemeister GMX 400 linear was manufactured in 2004, featuring a maximum turning diameter of 640 mm and a turning length of 1,585 mm. It includes a Sinumerik 840D Powerline control, a milling spindle with a max speed of 12,000 rpm, and a tool magazine with up to 120 positions. If you are looking to get high-quality turn-mill capabilities, consider the DMG Gildemeister GMX 400 linear machine we have for sale. Contact us for more information. Knjdpfx Asx D S Dgopmsa Additional equipment • Oil mist extraction • Coolant tank with belt filter system • Internal coolant system with 80 bar pressure • Approx. 30 tool holders Machine Benefits Technical Machine Benefits • Drive power - main spindle: max. Torque 600 nm • B-axis: +/- 120° • C-axis resolution: 0. 001° and 1° • Maximum turning diameter: 640 mm • Turning length: 1585 mm • Standard turning diameter: 400 mm • Distance between centers of main spindle: max. Bar diameter 90 mm • Chuck diameter: 250 mm (max. 400 mm) • Number of tool positions: 12 positions • Turret tool holder: 40 mm din 69880

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,229 h, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 310i-S, number of axes: 8, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Chip discharge height: 1250mm Technical Specification Knsdpfxex D H I Te Apmoa Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2008, controller manufacturer: FANUC, controller model: Fanuc 310, This 4-axis DMG Gildemeister SPEED 32/10 linear was manufactured in 2008. It features a CNC Fanuc 310iS control, a main spindle with a bar capacity of 33 mm, and a maximum speed of 8,000 rpm. The machine offers robust multitasking capabilities with a total of 16 driven tool stations and a turret for efficient processing. If you are looking to get high-quality turning capabilities, consider the DMG Gildemeister SPEED 32/10 machine we have for sale. Contact us for more information. • CNC: Fanuc 310iS • Panel type: SlimLine • Screen: 15" TFT Color • Controlled spindles (including C axes): 2 • Controlled axes: 8 • Channels: 3 • Bar capacity: 33 mm (36 mm max) • Draw tube inner diameter: 46 mm • Maximum speed: 8000 rpm • Nominal torque (S1): 24 Nm • Nominal power (S1): 5.5 kW • Draw tube inner diameter: 38 mm • Maximum speed: 8000 rpm • Nominal torque (S1): 9.4 Nm • Nominal power (S1): 3.7 kW • Axis X1 • Travel: 50 mm • Maximum speed: 40 m/min • Maximum acceleration: 10 m/s² • Nominal thrust (S1): 1200 NAxis Y1 • Travel: 350 mm • Maximum speed: 30 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 5000 NAxis Z1 • Travel: 320 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NAxis X2 • Travel: 310 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NAxis Z2 • Travel: 320 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NAxis X3 • Travel: 80 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 1200 NAxis Y3 • Travel: 60 mm (±30 mm) • Maximum speed: 18 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 5000 NAxis Z3 • Travel: 150 mm • Maximum speed: 40 m/min • Maximum acceleration: 5 m/s² • Nominal thrust (S1): 2500 NTurret • Total stations: 16 • Fixed external tools: 8 • Tool shank size: 16×16 mm • Driven tool stations: 16 • Collet type: ESX/ER 20 • Maximum driven speed: 5000 rpm • Nominal torque (S1): 4.8 Nm • Nominal power (S1): 1.5 kWToolsToolholder Slide 1 • Total stations: 10 • Fixed external tools: 6 • Tool shank size: 16×16 mm • Driven tools: 4 • Collet type: ESX/ER 20 • Maximum driven speed (GEO 7–9): 5000 rpm • Nominal torque (S1): 2.19 Nm Kjdpfx Apszvvp Romsna • Nominal power (S1): 0.55 kW • Secondary driven speed (GEO 8–10): 3333 rpm • Nominal torque (S1): 3.28 Nm • Nominal power (S1): 0.55 kWBack Working Slide • Total stations: 4 + 2 • Internal fixed tools: 3 • Toolholder diameter: 25 mm • External fixed tools: 1 • Driven stations: 2 • Collet type: ESX/ER 16 • Maximum driven speed: 6000 rpm • Nominal torque (S1): 1.75 Nm • Nominal power (S1): 0.55 kWMediaLubrication System • Tank capacity: 2.9 L • Operating pressure: 30 bar • Stop time: 7 minutes • Operating cycle time: 30 seconds • Lubricant type: Castrol Magna BD 68Pneumatic System • Minimum operating pressure: 5 bar • Maximum operating pressure: 6 bar • Consumption: 60 NL/min

Condition: excellent (used), Year of construction: 2005, Gildemeister GLD25 Machine in very good operating condition. Kedpfezvpaijx Apmona It can be inspected at any time during production. Only 10,800 operating hours.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 58,132 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, spindle motor power: 21,000 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT, product length (max.): 3,565 mm, workpiece diameter (max.): 420 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: CNC PILOT • Distance Between Centers: 600 mm • Swing Over Bed: 570 mm • Swing Over Cross Slide: 470 mm • Maximum Turning Diameter: 420 mm • Spindle Nose: DIN 55026 Flat Flange Size 170h5 • Front Bearing Diameter: 120 mm • Spindle Bore: 79 mm • Maximum Chuck Diameter: 250 mm • Maximum Torque: 320 Nm • Turret Type: Disc Turret • Tool System: VDI 20/20 • Tailstock Taper: MK4 • Tailstock Quill Diameter: 80 mm • Tailstock Quill Travel: 550 mm • Feed Drive X-Axis: 3.3 kW • Feed Drive Z-Axis: 3.3 kW • Lubrication Pump Power: 0.1 kW • Coolant Pump Power: 1.4 kW • Hydraulic Pump Power: 1.5 kW • Rapid Traverse X-Axis: 24000 mm/min Kodpfszufq Iex Apmjna • Rapid Traverse Z-Axis: 20000 mm/min • Feed Rate: 0.025–7000 mm/min • Thread Pitch Range: 0.025–3500 mm/min • Coolant Tank Capacity: 100 L • Power Supply: 400 V • Frequency: 50 Hz • Connected Load: 44 kVA • Rated Current: 64 A • Control Voltage: 24 V • Operating Hours: 58,132 h • CE Certified • Scope of delivery as shown, including 3 internal clamping heads • Configuration as shown: VDI30 disc turret Optional Equipment: • Tailstock • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale - must go due to cessation of activities Different separate spare parts available, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts €9.500 per Gildemeister Knedpfx Apjd S E Itjmja

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 21,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 1,185 mm, total height: 3,040 mm, total width: 4,100 mm, overall weight: 15,000 kg, controller manufacturer: HEIDENHAIN, controller model: Plus IT 3D CNC Pilot 4290 plus it, product length (max.): 7,800 mm, number of axes: 7, This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information. - Guide Way Type: Roller guide ways- Main Spindle: - Drive Power (100% ED): 21 kW - Drive Power (40% ED): 28 kW - Spindle Speed Range (100% ED): 5000 rpm - Spindle Speed Range (40% ED): 5000 rpm - Base Speed: 850 rpm - Torque max. (40/100% ED): 240 / 320 Nm - Drive Type: AC/1, Integrated Spindle Motor 76 - C-Axis Speed: 5000 rpm - C-Axis Torque: 320 Nm - C-Axis Resolution: 0.001 deg - Chuck Diameter: 200 - 315 mm - Bar Capacity max.: 65 mm - Spindle Flange: Flachflansch 170 h5 - Spindle Bore Diameter: 80 mm - Clamping Cylinder Bore Diameter: 67 mm - Diameter in Front Bearing: 120 mm- Tool Spindle / Milling Spindle: - Tool Holder: HSK63-A - Spindle Speed max.: 12000 rpm - Drive Power (100% / 40% ED): 13.2 / 22 kW - Torque (100% / 40% ED): 60 / 100 Nm- Spindle 2 (Counter Spindle - option): - Drive Power (100% / 40% ED): 21 / 28 kW - Speed max.: 5000 rpm - Chuck Diameter: 315 mm - Bar Capacity max.: 65 mm- Working Range / Turning Diameter: - Swing diameter max.: 640 mm - Turning diameter max.: 520 mm - Turning diameter over counter spindle max.: 400 mm - Turning diameter over counter spindle & turret max.: 250 mm - Turning diameter over tailstock max.: 400 mm - Spindle distance: 1500 mm - Turning length (short / long): 1175 mm - Workpiece weight chuck parts (flange weight) max.: 150 (100) kg - Workpiece center of gravity from spindle flange max.: 200 mm - Workpiece weight shaft parts with tailstock max.: 800 kg- Slide Travel: - Slide 1 (top): X1 = 550 mm, Y1 = 180 mm, Z1 (short/long) = 1185 mm, B1 = 240 deg - Slide 2 (option): X2 = 180 mm, Z2 (short/long) = 1050 mm - Slide 3 (counter spindle): Z3 (short/long) = 1150 mm- B-Axis: - Swivel speed max.: 30 rpm - Torque B-Axis (S6-40%/max.): 2860 / 5720 Nm - Resolution B-Axis: 0.001 deg - Clamping hydraulic (at 30 bar): 2000 Nm- Tool Magazine: - Number of tool pockets: 36 - Tool weight max.: 8 kg - Tool length max.: 400 / Ø80 mm - Tool length max. with free space: 250 / Ø125 mm - Tool diameter standard: Ø80 mm - Tool length max. without free space: 230 / Ø80 mm - Turning tool f-dimension standard: 40 mm - Turning tool f-dimension with free space max.: 62.5 mm - Tilting moment tool standard max.: 60 (100) kg/cm - Lifting movement: 85 mm- Turret 2 (Option): - Driven Tools Equipped: Yes - Number of tool stations: 12 - Shaft diameter acc. to DIN 69880: 40 mm - Number of driven tools: 12 - Drive power (max. 100% ED): 10.7 kW - Torque (max. 100% ED): 32 Nm - Speed range: 4000 rpm - Indexing time (30/180 deg.): 0.34 / 0.64 s - Tool load max.: 100 kg - Permissible imbalance due to tool loading: 63 Nm- Feed Drives & Rapid Traverse (Schlitten 1, 2, 3): - Rapid traverse X/Ys/Z (Slide 1): 40 / 24 / 70 m/min - Feed force X/Ys/Z (Slide 1, S6-40%): 7 / 11 / 7.5 kN - Travel resolution X/Ys/Z (Slide 1): 0.001 mm - Ball screw X (Slide 1): Ø32 x 20 mm - Ball screw Ys (Slide 1): Ø40 x 15 mm - Linear motor Z1-Axis: 1FN3600-4WB00 - Rapid traverse X/Z (Slide 2): 24 / 36 m/min - Feed force X/Z (Slide 2, S6-40%): 9 / 11 kN - Rapid traverse Z (Slide 3): 36 m/min - Feed force Z (Slide 3, S6-40%): 13 kN- Coolant & Chip Conveyor: - Coolant capacity: 370 l - Drive power: 0. Kedpfoyfv Rbox Apmena

Condition: used, Gildemeister CTX 320 Linear V6 with Y axis New 2005. FANUC 18T . Collet chuck Supplied with no collets, the original 3 jaw chuck will be supplied. there is also the option to supply a bar feed unit (Imeca VIP 70CNC, year 2001) which is compatible for the machine, however currently not set up. VDI and Driven Tooling Supplied as per images - Note Filtermist Unit will not be supplied Ksdpfxsztb Tcj Apmona

Condition: used, Year of construction: 1998, Spindle bore 56 mm (main spindle) Spindle speed (main) 31-6300 rpm Spindle speed (Sub) 5000 rpm Movements: Slide 1 - X/Z - 155/280 mm Slide 2 -X/Z - 82/130 mm Turret 1: 8 stations (4 rotating/live) - 120 rpm (C-axis) Turret 2: 8 stations Control: Siemens Sinumerik 840 C Equipped with: Kjdjzr Dn Hjpfx Apmona Chip conveyor 30 pcs. tool holders 8 rotating tool holders Magazine bar feeder model Simag 65.1 - 3200 mm

Condition: good (used), functionality: fully functional, Jungheinrich EKS 110 Z 160E order picker: - Regularly serviced by Jungheinrich Kedjzrtdkopfx Apmena - Several units available - Battery from production year 06/2022 (11/2023) - Forklift from production year: 2012 (2015) - Operating hours: 2,073 h (3,200 h) - Load capacity: 1,000 kg - Lifting height: 1,600 mm - Includes charger Shipping via freight forwarder is possible upon consultation. € 2,900,- #8545-4 to -5 Jungheinrich ECE 320 HP order picker: - Production year: 2020 BAT2020 (2018 BAT2021 / 2020 BAT2020) - In very good condition - Regularly serviced by Jungheinrich - Several units available - Operating hours: 2,674 h (4,256 h / 3,565 h) - Incl. charger - Load capacity: 2,000 kg - Lifting height: 750 mm - Fork length: 2,400 mm Shipping via freight forwarder is possible upon consultation. € 2,900,- #8545-1 to -3 Still EK-X vertical order picker: - In good, functional condition - Regularly serviced by a specialist company - Several units available - Production year: 2017 - Operating hours: 2,760 h - Load capacity: 800 kg - Lifting height: 440 cm - Overall height: 240 cm - Includes charger Shipping via freight forwarder is possible upon consultation. € 3,500,- #8545-6

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 Knsdpfxsznulbs Apmea MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: used, Year of construction: 2021, Overview This SPEIDEL Braumeister 500 is a compact single-vessel electric brewhouse with 500 L (5 hL) batch volume, built in 2021 by Speidel Tank- und Behälterbau GmbH (Ofterdingen, Germany). Mashing, lautering and wort boiling take place in one stainless-steel kettle: the removable malt pipe with perforated base screens and filter cloth holds the grain bed, while the integrated 18.4 kW electric heating elements and wort circulation manage the temperature steps. The brewhouse produced beer at a craft brewery in France until November 2025. It is dismantled, stored and immediately available. Technical data Knsdpfx Asznd Ewepmja - Manufacturer: SPEIDEL Tank- und Behälterbau GmbH (Ofterdingen, Germany) - Model: Braumeister 500 (Art. no. 46500) - Year of manufacture: 2021 - Machine type: single-vessel electric brewhouse (malt pipe system) - Batch volume: 500 L (5 hL) - Heating power: 18.4 kW (electric) - Power supply: 400 V, 3-phase, 50/60 Hz - Protection class: IP 43 - Application: beer - Dimensions: approx. 120 x 126 x H 150 cm - Weight: approx. 377 kg Equipment - Removable malt pipe with perforated base screens and filter cloth - Stainless-steel lid - Integrated electric heating elements and wort circulation Condition Used - in beer production until November 2025, last maintenance November 2025. The machine is dismantled and stored. Availability Immediately. Location: France. Handling and truck loading are included (EXW loaded). The machine can be visited on request.

Condition: used, Year of construction: 2003, functionality: unexamined, turning diameter over cross slide: 455 mm, turning length: 1,000 mm, turning diameter: 680 mm, spindle bore: 107 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 4 rpm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, GILDEMEISTER CTX 600 / CTX 620 CNC – CNC Lathe – Fully Functional – Chip Conveyor For sale: a GILDEMEISTER CTX CNC lathe (exact model to be confirmed from the nameplate). The machine comes from a production plant that is being shut down. It operated until the end of the company's operations and was dismantled from the active production line. It is complete and sold in the condition it was taken from. Equipment: * Heidenhain control, * tool turret, Ksdpfszmqdkox Apmona * hydraulic tailstock, * hydraulic chuck, * chip conveyor, * cooling system, * full safety enclosure. Approximate parameters: * max. turning diameter: approx. 680 mm, * turning length: approx. 1000 mm, * spindle bore: 107 mm. The machine is available immediately. Loading is possible after prior arrangement.