Used Combined Machines for sale (66,096)

Condition: new, Year of construction: 2025, LAB 300 PLUS F 16 TERSA - Universal multiple combination with aluminium sliding table and three milling speeds for sawing, milling, planing/thickness planing and optional slot drilling Ibodpfx Aocnxa Njfiec torsion-resistant cast steel construction machine table made of grey cast iron, hardened and ground light-weight anodized aluminium sliding carriage, 10 years warranty on wear of the guideways large trimming frame with extendable aluminium telescopic fence and folding fences with combi saw fence with 45° quick adjustment max. saw blade Ø 315 mm with optional scoring device, swivels from 90°-45° helical toothed steel infeed roller for uniform wood infeed when planing thicknesses four milling speeds, manually adjustable standard with right-left rotation of the milling spindle three independent motors for each working unit scope of delivery: Combi planer/parallel fence arched cutter guard Tersa cutterhead anodized aluminium sliding carriage aluminium stop jaws folding fence eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Article-No. 5500314 Technical data ---Technical data circular saw--- circumference 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. clearance width left of saw blade 1660 mm cutting width at rip fence 800 mm saw shaft speed 3500 rpm. saw blade inclination 90° - 45 ---Technical data dressing--- working width 300 mm Dressing table length 1260 mm Ho

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4410x3050x2727 mm Weight 13070 kg Total power requirement 172 kw Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination) - Max. Working width 1300mm - Min. Working Length 490mm - Working Thickness 3-150mm - First unit: Contact roller Ø240 - Second unit: Contact roller Ø240 - Third unit: Ø240 pad - Total: Motor 77kw - First Unit: Motor 30kw - Second Unit: Motor 22kw - Third Unit:Motor 18.5kw Ibsdsv A Hf Topfx Afioc - Conveyor belt: Motor 4kw - Lifting Motor 0.55kw - Brush roller: Motor 1.5kw - First unit: Contact roller shore Steel - Second unit: Contact roller shore 80sh - Third unit: Contact roller shore 55sh - Conveyor belt: Speed 5-30m/min - Abrasive Belt Size 1350*2620mm - Air Pressure 0.6Mpa - Overall Dimensions 2235×3050×2600mm - Net Weight 5700 kgs - Working Table Fixed - Working table height from the ground 900mm - Voltage 400v/50hz/3phases - Air jet for each belt Optional - Automatic centering of conveyor belt YES - Press roller (rubber) YES Wide Belt Sanding machine SUR-R-P1300 (Roller+Roller+Pad) - Max. Working width 1300mm - Min. Working Length 350mm - Working Thickness 10-100mm - First unit: Contact roller Ø255 - Second unit: Contact roller Ø255 - Third unit: pad - Total: Motor 95kw - First Unit: Motor 37kw - Second Unit: Motor 30kw - Third Unit:Motor 18.5kw - Conveyor belt: Motor 4kw - Lifting Motor 0.55kw - Brush roller: Motor 0.55kw - First unit: Contact roller shore 80sh - Second unit: Contact roller shore 70sh - Third unit: Contact roller PAD - Conveyor belt: Speed 5-30m/min - Abrasive Belt Size 1320*2000mm - Air Pressure 0.6Mpa - Overall Dimensions 2175×2976×2727mm - Net Weight 7370 kgs - Working Table Fixed - Working table height from the ground 1038mm - Voltage 400v/50hz/3phases - Air jet for each belt YES - Automatic centering of conveyor belt YES - Press shoes(steel) YES

Condition: new, - New -Description:- For sawing, milling, surface planing, thickness planingand optional slot drilling- The work tables made of heavily ribbed gray cast ironand the underframe made of welded steel guaranteeTorsion resistance and vibration-free work- Unique in this performance class: smootherAluminum format slide, anodized, with ball contact system- Swiveling saw blade from 90 ° - 45 °- Table bracket with graduated scale and aluminum crosscut fencefor angled cuts on plates and large workpieces- Planing unit with TERSA quick change systemwith three planer knives- Helical-toothed steel feed roller for constantWorkpiece infeed when thicknessing- curved milling protection hood for profiling,with fine adjustment as standard- Milling unit with two speeds- The units are driven by three independent motors- Made in Italy qualityTechnical specifications:Dimensions and weightsWeight (net) approx. 245 kgDressingPlaning table width 300 mmPlaning table length 1200 mmAngle of inclination saw / planer fence 90/45 °Chip removal ssing 3 mmConnection suctionExtraction nozzle diameter 4 x 120 mmSuction nozzle diameter of the saw blade guard 60 mmInstallation informationRequired space length 2460 mmSpace requirement width / depth 2155 mmExplanation of space requirements: Take the dimensions into accountmaximum travels or useful cknessThickness table length 450 mmThickness table width 300 mmWorking height thickness min. 3 mmWorking height thickness max. 200 mmChip removal max. Thickness 3 mmElectrical dataConnection voltage 400 VMains frequency 50 HzNominal operating mode drive motor S6Duty cycle of drive motor 40%Drive motor power 3 x 1.8 kWSliding carriage and tableFormat sliding carriage length 1140 mmFormat sliding carriage width 201 mmFormat sliding carriage height 70 mmTable length 1024 mmTable width 224 mmTable height 900 mmMilling spindleSpindle inclination 0 °Spindle mandrel diameter 30 mmUsable length of the spindle 75 mmSpindle speed (s) 5000 - 7500 min? ¹Milling tool diameter l diameter max. 160 mmTool diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmPlaner knife shaftPlaner shaft type TERSAPlane shaft diameter 62 mmNumber of planing knives 3 pcsCircular saw unitTrimming length 1200 mmCutting width with rip fence 540 mmMax. Cutting width to the left of the saw blade 1200 mmSaw blade inclination 90 - 45 °Max. Cutting height at 90 ° 67 mmMax. Cutting height at 45 ° 40 mmMax. Saw blade projection 90 ° 75 mmMax. Saw blade projection 45 ° 60 mmFeedFeed speed 6 m / minScope of delivery:- Tersa quick-change planer knife shaft- anodized aluminum sliding table- Multifunctional stop for parallel cuts and surface planing- Table extension arm with crosscut fence and stop jaw- Eccentric clamping armItem no .: 5500030 Ijdpfxevwf Ens Afiobc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2440x1360x2060 mm Isdsv A Hf Hepfx Afiebc Weight 3000 kg Total power requirement 42 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2850x2050x2200 mm Weight 5150 kg Total power requirement 78 kw Ibjdpev A Hfyofx Afijc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x2900x850 mm Weight 650 kg Ibodsvz E S Ajpfx Afioc Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Total power requirement 2,2 kw Ibodpfevz E Siex Afiec

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Ijdpevz E Rxsfx Afiobc Weight 650 kg Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1800x1200 mm Ibedpfxovz E Rro Afisc Weight 650 kg Total power requirement 2,2 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2540x2900x850 mm Ibsdpfjvz E Ikex Afioc Weight 1200 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3000x2900x850 mm Weight 1280 kg Total power requirement 5,5 kw Ijdsvz E Ecspfx Afiebc

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Ibjdpfxshnc E As Afioc Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, controller manufacturer: LNC-Control, workpiece length (max.): 3,200 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 200 mm, workpiece weight (max.): 1,500 kg, Equipment: rotational speed infinitely variable, BudgeCaft is a manufacturer of high-quality CNC machines. We design, develop, assemble, and sell CNC machines for businesses and industrial manufacturers. BEST DEAL Transport, installation, machine instruction, and CAD/CAM training are provided by Danmar Machines (languages: Dutch, English, French, Italian, or German). Additional charges may apply depending on the location. • Starter tool kit • ISO30 • ER32/ER40 collets • Vacuum pump • ATC spindle CC 9 kW • 1 year of online support/helpdesk for CAD/software (English) • 12-month standard factory warranty Suitable for machining: wood, panel material, acrylic, PVC, aluminum, foam, multiplex board, plasterboard, rock wool, plastics, etc. - 9 kW ATC spindle ISO30 ER32/ER40 - LNC MW control system - Leadshine servo motors - Tool change magazine - Vacuum table - Vacuum pump - Powerful side channel blower, air pump - Pegasus CAD/CAM software Ibodpfx Afjwc Uadsiec Custom configurations available Working area dimensions:  1300 x 2600mm € 31,800  1600 x 3200mm € 37,500  2100 x 3200mm € 41,600 Linear tool magazine automatic changer: 10-12-16 position tool changers, automatic tool change during operation. Working area X-axis: 2600-3200 mm Working area Y-axis: 1300-1600-2100 mm Z-axis stroke: 200 mm Gantry construction: Yes Spindle motor: 9 kW servo motor (ATC spindle) Speed: 1,000-24,000 rpm Axis travel X-axis: 50 m/min Axis travel Y-axis: 50 m/min Axis travel Z-axis: 15 m/min Tool holder: ISO30-ER32-ER40 Software: Pegasus PWoodEntry Vacuum pump: included

Condition: good (used), Year of construction: 1999, Built in 1999 400 V; 50Hz 1.5 kW Linishing belt 100 x 1500 Belt speed 25m / sec. Weight approx. 50 kg Ijdpsba Hz Ujfx Afisbc

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Iodpfxjv Er Nis Afijbc Photos Available on your email or Mobile Phone WhatsApp.

Condition: used, Year of construction: 2010, The Maximum Machines UG PSV 600, manufactured in 2010, is a machine with a format of 600 mm. It is currently in stock and located in Germany. This pressing unit with a vertical stacker is PLC-controlled and features automatic shingle control, multiple counters, and a batch counter. It offers better information through the PLC display, easier setting, and enhanced efficiency with a stronger pressing unit. Additionally, it is equipped for 2-up operations. The delivery terms are FCA. Format: 600 mm Equipment: PSV 600 - Pressing unit with vertical stacker basics: plc-controlled - automatic shingle control - multiple counters better informations by plc-display - easier setting - more efficiency Ibjdpfx Afovfxx Deijc Stronger pressing unit - batch counter - 2-up-equipment

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Ibsdpfx Aoumm Npjfisc

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Ibsdpfxol Dw D Es Afioc Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Iedpfx Afshg Rcxjijbc Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: used, Year of construction: 2019, functionality: fully functional, Selling a Selmi Comfit 2019 Panning Machine, complete with the integrated spray system. This machine is in excellent working condition and has been very well maintained. Ideal for coating nuts, dried fruits, coffee beans, or inclusions in chocolate or sugar – it’s perfect for any artisan or small-scale chocolate manufacturer looking to scale up panning production with precision and efficiency. Key Features: Year: 2019 Includes the Selmi heated spray system for chocolate Precision-controlled air flow and temperature Polished stainless steel drum Suitable for small to medium batch production 220V single phase (UK compatible) Ibsdpsw Nx A Uofx Afiec Machine is located in Somerset, UK and available for immediate collection or shipping (buyer to arrange transport). We have two of these machines available.

Condition: like new (used), Year of construction: 2023, For sale: MHM SPiQ 20 45×55 screen printing carousel (SYNCHROPRINT iQ OVAL compact) with iDS (individual Drive System). Manufacturing date: January 2023. Manufacturer: MHM – Machines Highest Mechatronic GmbH (Austria) Model: SPiQ 20 45×55 Type: 1450IQ Year of manufacture: 01/2023 Power supply: 3×400 V, 50/60 Hz Connected load: 7.4 kVA Air requirement: approx. 690 l/min, 0.8 MPa (8 bar / 116 psi) Specification (per order): • Print area: 45×55 cm • Number of printing stations: 13 • Number of flash cure units: 4 Ibjdpfxoxb Avze Afioc Equipment: • 20× aluminium palette with neck cut-out: 52×80 cm • 13× squeegee blade 50 cm / 65 shore • 13× flood blade (low) 50 cm • 1× MHM Pro Iron – 40 cm Overall dimensions: 3.5 m × 11 m

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 3 h, overall weight: 7,000 kg, empty load weight: 3,500 kg, maximum load weight: 3,500 kg, color: white, Equipment: documentation/manual, rubber tracks, The latest generation of towing service Isdpow Hggqefx Afiobc

Condition: good (used), Tray wash machine, direct from recently closed ‘meat-free’ factory. In lovely condition. Ibodporfdq Ujfx Afiec

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 8,000 rpm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection Ijdpfow Ty S Sex Afisbc - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Year of construction: 1990, condition: ready for operation (used), Working width: 900mm, length: 2600mm, width: 2600mm, height: 2000mm, weight: 1.8t, operating hours: 5866h. Including wet suction. Documentation and maintenance reports available. On-site inspection is possible. Ibodpfsuzlg Dex Afijc