Used Saw Machine for sale (91,725)

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Iedpsxliguefx Afiobc Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Isdpsxlfwpsfx Afisbc Without band saw holder (L x W x H): 750 x 550 x 1100 mm With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm

Year of construction: 2019, condition: ready for operation (used), Main Drive Number of axis 2 This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine. Application Types Welding Iedpfx Ajxpkpfofisbc

Condition: excellent (used), Circular saw Ø 100 to 550 mm, tooth pitch 10 - 40 mm, tooth height 5 to 25 mm, grinding motor 370 Watt/380 Volt, large machine stand for favourable working height, including 2 clamping cones for circular saws with bores from 15 to 85 mm Ø Ibedpfx Afslyqthjiec

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, BEHRINGER HBE 321 A from year 2015, with accessories. Available from stock. The machine will be reconditioned by us including a major inspection. Saw band 4440x34x1.1 mm, cutting range 320 mm round – flat 350 x 320 mm, flood cooling and minimal lubrication, hydraulic clamping units, roller conveyors and coolant collection tray. Iedpfxjxni A Uo Afiobc

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : Isdpoxmuzaofx Afisbc 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Feed length, double stroke 1200 mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Ijdpfx Aexph E Rjfisbc Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: excellent (used), Grinding Machine LOROCH type: AK Ibjdpfxoxn Uite Afioc very good condition loaded on a truck fixed price

Condition: ready for operation (used), Well-maintained panel saw in top condition Combination unit: table milling machine & circular saw Type: KFS 20 Year of manufacture: 2000 Sliding table length: 200 cm Cutting width to the right of saw blade: 100 cm Saw blade tiltable up to 45 degrees Milling spindle 30 mm Rip fence extendable up to 250 cm Technically inspected Immediately available Shipping possible Ibsdpfx Afsxn Sbysijc

Condition: used, Woodtronic C5 Walter - 5-axis CNC sharpening machine - Automatic B axis - Measurement probe - Large diameter range: from 80 to 710 mm Isdpoxn R I Sofx Afiobc - Fully automatic sharpening of the face and back of the tooth - Dimensions: 1771 mm width and 1895 mm length - Connected power: 4.5 kVa - Weight: 1890 kg - Cooling system capacity: approx. 150 L - WMC100 SIEMENS software

Condition: excellent (used), Band saw grinding and setting machine VOLLMER model BN30TS Ibsdpohhdaxefx Afijc

Condition: used, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Iodpjxn Itrsfx Afisbc Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. WARNING! THE MACHINE IS RETURNED, SERVICED, NO PACKAGING.

Condition: good (used), Code: 0046 Brand: KUPFERMUEHLE - GERMANY Model: DOIN - VUIN 605 2-shaft planing machine + multi rip saw for wood carpentry, wood beams, roofing, sawmill, coffins and various Technical data: Heavy cast iron structure Working width mm 605 Min/max working height mm 3/200 Min workpiece length mm 350 Automatic group lifting with possibility of manual adjustment Feed speed mt/min 7 - 9 - 11,5 - 14 - 18 - 23 Ibsdjv D N Efjpfx Afioc Infeed table with 3 support guides and motorized top feed rollers Height adjustable guide saw unit - Motor Hp 2,5 - Blade diameter mm 180 - Suction port mm 120 Motorized towing roller on the table 1° shaft surface planer with 4 knives - Motor Hp 7,5 - Suction port mm 120 2° shaft thickness planer with 4 knives - Motor Hp 12 - Suction port mm 160 - Motorized towing roller on the table 3° Multiblade saw shaft - Motor Hp 40 - Blade diameter mm 230 - Cutting height mm 50 - Upper suction port mm 160 - Lower suction port mm 160 N° 2 upper motorized towing rollers and N°1 lower roller Control panel Overall dimensions mm 3300 x 1650 x 1600 h Weight kg 4000

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Ibsdjw Imptjpfx Afisc Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: good (used), Year of construction: 2008, Available ex works from customer as of 30.10.2025 – subject to prior sale Iedoxln Nhjpfx Afiobc HYDRAULIC BAND SAW AUTOMATIC MACHINE Make: BEHRINGER Model: HBP 263 A Year: 2008 Cutting range round: 260 mm Cutting range flat: 300 x 260 mm Minimum cutting range round: 10 mm, flat: 10 x 8 mm Saw band dimensions: 4640 x 34 x 1.1 mm Drive power, frequency-controlled: 4 kW Cutting speed: 20 - 140 m/min Dimensions – width: 2500 mm – length: 1900 mm – height: 2050 mm Weight: 1800 kg Material feed length: 400 mm per stroke / maximum 3600 mm NC program control

Condition: not inspected (used), Brand: Walter Year of manufacture: 2000 Sold as is, used 8-axis CNC carbide blade sharpener for face and back, with a 2-station linear loader. Diameter range: 80 to 850 mm - Standard measuring probe for detection and management of grinding parameters - SIEMENS MMC103 CNC control - All tooth geometries - Loading capacity up to 120 blades (or more) depending on blade diameter and thickness - Loader working range: 150 to 600 mm Options available upon request Ijdpfoxm T Huox Afisbc Contractual photos

Condition: excellent (used), Band saw setting machine PEDRIELLI model PG Ibjdjv Uzhyepfx Afijc

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: Iodewl Ea Tspfx Afiebc 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, lots of accessories good, well-maintained condition Operating manual is available Isdpfx Aexmuxrsfiobc

Condition: good (used), Year of construction: 2000, functionality: fully functional, Pertici Univer 403 IP Double Mitre Saw for Aluminium and Light Alloys Ibodpfsxmk Tfsx Afioc The Pertici 403 IP is a high-quality double mitre saw designed for the precise cutting of profiles in aluminium and light alloys. This machine combines accuracy with user-friendliness, making it ideal for production environments where speed and repeatable precision are essential. Technical Specifications Saw blade diameter: 400 mm (carbide-tipped saw blades) Mitre angles: 90° to 45° (both sides) horizontal 90° to 45° (one side) vertical Angle adjustment: manual setting Control: electronically programmable control panel Minimum cut length: at 45° - 150 mm (short side), at 90° - 340 mm Maximum cut length: 6000 mm Material suitability: suitable for aluminium, PVC and light alloys 2 carbide-tipped saw blades with a diameter of Ø 400 mm 2 vertical pneumatic clamps 2 horizontal pneumatic clamps Dimensions & Weight Dimensions (H × W × L): approx. 1700 × 1400 × 7000 mm (without rear guide); total length with guide is 9000 mm Weight: approx. 700 kg Financial information VAT/margin: Margin: The displayed price includes VAT (VAT non-deductible for business buyers)

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Ijdpfjv Dvhyox Afiebc Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min Iedohwxb Tspfx Afiobc -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Condition: excellent (used), Deburring machine for band saw blades IDEAL model SM60 to remove the residual welding bead. Ibjdpfsxk Tb Tox Afioc

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Spindle moulder - Spindle diameter: 25 mm - Spindle height: 120 mm - Interchangeable spindle, tiltable by 20 degrees - Spindle lock - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750 mm - 4 spindle speed options - Motor: 3.8 kW Circular saw - Max blade diameter: 350 mm - Arbor diameter: 30 mm Iedpfx Asxhdm Isfijbc - Blade adjustable up/down and at an angle - Spindle lock - Cutting width with guide: 540 mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000 mm - Weight: 610 kg ADVANTAGES – Made in Poland – DTR technical documentation – Used spindle moulder, very good condition Net price: 6900 PLN Net price: 1620 EUR according to 4.25 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Large automatic setting machine for band saw blades. Automatic work cycle. Choice of type of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and Iedpfxow Hup Ho Afiebc roller to support saw blades.