Used Sinumerik 820 for sale (1,562)

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, 100% functional Ijdpfx Asi Ecl Iohvotd

Condition: ready for operation (used), Complete monitor unit 12" for Siemens control 820,used, normal traces of use, 100% functional, scope of delivery according to photos Itjdpfji Ebwdox Ahvjd

Condition: new, R. & S. Keller Control panel Sinumerik 820 T , unused, in opened original packaging, 100% functional Isdpfx Aoi Ecl Sjhvjtd

Condition: new, Siemens SINUMERIK 840D/DE NCU 572.2 6FC5357-0BB21-0AE0 SN: ST-M82029648, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos Itedjxahtvspfx Ahved

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles Itedpeyvvluefx Ahvsd for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Iedpfx Aetuggcehvstd Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: refurbished (used), Manufacturer: Siemens Iodpfxjyryggs Ahvjtd Series: SINUMERIK Type: Operator panel front Part number: 6FC5203-0AF02-0AA0 Item number: 204558 Drawing number: 90210001109

Condition: ready for operation (used), Year of construction: 2002, This ERNST 820-2 belt sander was manufactured in 2002. It features a new conveyor belt and a vacuum hold system for secure positioning. The main sander utilizes a two-shoe system, enhancing its sanding capabilities. It has a working width of 1350mm and a height of 120mm. Contact us for more information about this machine. Application Types Iodpfxox D Dp Uj Ahvotd Sanding

Year of construction: 2019, operating hours: 17,716 h, condition: ready for operation (used), General Data Measurements width 1920 cm Measurements depth 7750 cm Machine weight 26210 kg Isdpfxjx D Nx Ij Ahvstd Measurements height 2410 mm This SUMITOMO SHI DEMAG El-Exis SP 350/820-920 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 40 mm and a clamping force of 3,500 kN. It has operated for 17,716 hours with 12,440,761 cycles, ensuring extensive production capabilities. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis SP 350/820-920 electrical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,049 h, clamping force: 4,000 kN, overall weight: 21,000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine. Isdpjydpvbefx Ahvetd Clamping unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / increased: 800 kN • Opening stroke (max.): 700 mm • Mold height (min.): 350 mm • Distance between platens (max.): 1050–1550 mm • Clear tie bar distance: 820 × 820 mm • Mold mounting platens (W × H): 1171 × 1171 mm • Mold half weight (max.): 4500 kg • Ejector force (max.): 100 kN • Ejector stroke (max.): 250 mmHydraulics / drive / miscellaneous • Hydraulic pump drive power: 55 kW • Installed total power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Color: Plastic-coated structure (light gray / mint green / rapeseed yellow) • Control cabinets: Safety regulation DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 AInjection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN • Nozzle stroke (max.): 600 mm • Heating zones / heating capacity: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heating: 1000 W | 1250 WDimensions and weights (base machine) • Clearance length: 490 mm • Electrical connection (fuse protection) motor + heating: 250 A • Electrical connection (fuse protection) motor: 125 A • Electrical connection (fuse protection) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Year of construction: 2019, operating hours: 18,138 h, condition: ready for operation (used), overall weight: 25,340 kg, This SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 was manufactured in 2019. A robust electrical injection moulding machine with a screw diameter of 50 mm, clamping force of 3,500 kN, and tiebar spacing of 820 mm. It has operated for 18,138 hours with 12,875,090 cycles. If you are looking to get high quality moulding capabilities consider the SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 machine we have for tact us for more information. Additional information • Screw Diameter: 50 mm • Maximum Dosing Volume: 530 cc Isdpfx Aex D Nxzohvjtd • Cycles: 12875090 • Tiebar Spacing: 820 mm • Clamping Force: 3500 kN

Condition: new, Year of construction: 2025, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, Vertical Turning center SCR 44 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.000 Machining Diameter 4.400 mm Machining Heights 2.000 mm Work Piece Weight 16,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.000 mm WorkTable Speed 1 - 60(90) rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Iodeg Uwmqjpfx Ahvetd Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 X 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines 2 X ATC for 12 turning / milling tools Tool Storage 24 Axes Drives X1,2-Axes horizontal axis Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 50,000 N W-Axis Cross-Rail vertical movement Power Continuous S1 11 kW Axes Rates X1,2 And Z1,2-Axes Feed Rates 0.02 to 10,000 mm/min W-Axis Elevating Rate 400 mm/min Coolant System Coolant Tank Capacity 2,000 L Coolant Pressure / Flow Rate: -internal coolant (milling) -external coolant (turning) Filtration unit: -type -filtration size 40 bar at 40 LPM 5 bar at 100 LPM Cartridge type 25 µm Horizontal Drilling Head For inside and outside drilling operations. Maximum speed 3.000 rpm Power 42 kW Toolholder tape ISO 50 DIN 69871 CNC Control -producer Sinumerik 840 Dsl Siemens Accuracy Positioning: X ±0.010 mm / m Z ±0.010 mm /m C ±3 arcsec Repeatability: X 0.020 mm Z 0.020 mm Overall dimensions Length x Width x Height 11,000 x 6,600 x 7,500 mm Weight 79.000 kg Minimum Fused Disconnect 140 KVA

Year of construction: 2003, condition: excellent (used), functionality: fully functional, machine/vehicle number: 203501, No. 203501 Year of manufacture: 2003. Impressions: 103,255,905. Min. format: 320*280 mm. Max. format: 815*560 mm. Iedpfx Aoyb S Smshvotd Inspection possible. Disassembly possible. Documentation available.

Condition: used, Year of construction: 1983, turning diameter 820 mm turning length 300 mm turning diameter over slide 465 mm max. torque on the spindle 3000 Nm turning speeds 5,6-1120 U/min Feed 1-5000 mm/min Rapid movement 5000 mm/min tailstock quill taper MT 6 main drive motor 50 kW diameter of main spindle 170 mm spindle passage 128 mm tailstock quill diameter 125 mm tailstock quill stroke 250 mm z-axis 3000 mm x-axis 550 mm total power requirement 52 kW weight of the machine ca. 7,1 t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Itjdpfxsyqvamo Ahvod We look forward to your visit. Your Markus Hirsch Team

Condition: used, turning diameter 820 mm Ijdpoyqtr Tjfx Ahvetd turning length 5000 mm turning diameter over slide 460 mm control B2T max. torque on the spindle 3400 Nm turning speeds 5,6-1120 U/min Feed 1-5000 mm/min Rapid movement 5000 mm/min tailstock quill taper MT 6 3 jaw chuck Forckrath 630 mm steady 525 mm steady 335 mm main drive motor 50 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, SIEMENS SINUMERIK HANDWHEEL HT6 HANDHELD Itodoyl Aaijpfx Ahved Condition: Used (working), incl. 3-day functional guarantee after receipt of the goods. receipt of the goods.

Condition: like new (used), Year of construction: 2019, operating hours: 100 h, functionality: fully functional, machine/vehicle number: F9B192402, feed length X-axis: 450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, quill travel distance: 80 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, total height: 1,990 mm, total width: 2,030 mm, total length: 1,980 mm, table width: 270 mm, table length: 400 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, table load: 450 kg, overall weight: 2,270 kg, input voltage: 400 V, workpiece weight (max.): 450 kg, input current: 16 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, EMCOMAT FB-450 MC with Sinumerik 828D Contouring control with “manual Machine” Universal Milling- and Drilling-Machine with Sinumerik 828D Contouring control and hydraulic tool clamping working area X450/Y350/Z400mm 7/10kW power Spindle speeds from 10-5000 U/min feeds from 10-5000 mm/min rapid traverse up to 5000 mm/min toolmaker accuracy DIN8615 tool clamping acc. DIN 69871 SK40 including:  linear guides Itjdpfxexapdce Ahvjd  ball screws  vertical milling head +/-90° swivelling with 80mm sleeve stroke  swivel device for vertical milling head  hydraulic tool clamping  coolant equipment  LED-machine lamp  automatic central lubrication  rigid angle table 800x400mm  chip box  operating tools  dokumentation  executing with open work area protection (mode3)  controlled and manual version in one mashine  Sinumerik 828D Contouring control incl. Control unit in 3-Axis with ballsrews and servodrives, Conversational cycles entry with grapfic support: Drilling cycles for drilling, pecking, reaming and tapping on linear and circular hole patterns, Milling of rectangular and circular pockets and studs, Slot milling cycle, Face milling cycle, ... USB Interface,

Condition: good (used), For sale are 2 identical spiral conveyors / sorting machines 1* with silenced sheathing pot dm 820 cm Pot depth 36 cm Dimensions without cabin 125*158*135 with cabin 125*158*128 The cabin has several access doors Sorted were various holders for drywall screws (cable ties probably also possible) The spiral conveyors are functional and control to the respective machine are present The devices can be visited and/or tested by arrangement Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Itsdpohrntmjfx Ahved Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Itedsv Akmzspfx Ahvjd Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: used, Year of construction: 1999, Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Iedpfx Aoyk I U Njhvotd Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm belt conveyor 820-600-500 RA2421 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 820 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 80 mm motor height (MH): 545 mm Motor type: Van der Graaf drum motor TM 113 B25-434 Z Motor power: kW 0.55 230/400 V 50Hz Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: supports We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Ijdpfx Ahsw Iga Sovotd Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: good (used), Year of construction: 2011, functionality: fully functional, roll diameter: 50 mm, roll width: 820 mm, total width: 900 mm, total height: 140 mm, total length: 3,000 mm, conveying length: 3,000 mm, construction width: 900 mm, construction height: 140 mm, TAF article number: 1000004869 Manufacturer: DEMATIC Year of construction: 2011 Iodpfjwnn Ncox Ahvetd Overall dimensions (LxWxH) in mm: 3,000 x 900 x 140 Width incl. side panel in mm: 900 Cheek height in mm: 130 Conveyor length in mm: 3,000 Conveyor width in mm: 820 Idler diameter in mm: 50 Idler per axle: 1 Idler roller material: Steel Drive: Gravity Net weight in kg: 100 Condition: Used / fully functional Function test: Ok

Condition: good (used), functionality: fully functional, Parallel Lathe Safop 430 - 820 Travelling Bed Variable Turning Capacity: 430 x 2000 - 430 x 3000 Turning on Faceplate: 830 x 1000 Steady Rest Digital Readout Used Machine Internal Code Car Iodpfx Aoyi Ecbohvstd

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations Iodpswz Rifjfx Ahvjtd - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: used, Year of construction: 2018, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 720 mm, controller model: Mazatrol SmoothG, table width: 820 mm, table length: 3,500 mm, overall weight: 16,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, CNC Vertical Machining Center MAZAK VTC-820/30 (Year of manufacture 2018 / Commissioned 2019) The MAZAK VTC-820/30 is a high-performance CNC vertical machining center designed for precise and efficient machining of large workpieces. With generous travel distances of 3,000 mm on the X-axis, 820 mm on the Y-axis, and 720 mm on the Z-axis, this machine is especially suitable for long and complex components in mechanical engineering, mold making, and general metalworking. The robust worktable, measuring approximately 3,500 × 820 mm, allows for the accommodation of large-dimensioned workpieces. The powerful main spindle, with speeds up to 12,000 rpm and a drive power of around 22 kW, ensures high metal removal rates and accuracy. The CAT 40 (ISO 40) spindle taper provides broad tool compatibility. The machine is equipped with a state-of-the-art MAZATROL SmoothG control system, offering intuitive operation, fast programming, and high process reliability. The 48-position tool changer enables flexible and efficient production processes, even for complex manufacturing tasks. To ensure optimal production conditions, the machining center features through-spindle coolant supply, a chip conveyor, and a lubricant preparation system. With a machine weight of approximately 16,500 kg, the VTC-820/30 offers outstanding stability and vibration damping, which has a positive effect on surface quality and dimensional accuracy. Overall, this is a modern and versatile vertical machining center that delivers high precision, performance, and reliability for industrial manufacturing applications. Itedsyipy Ropfx Ahved With us, you are in the best hands – professional, reliable, and passionate about machinery! PS CNC Service Germany GmbH & Co. KG All information without guarantee.