Used Omga for sale (32)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Hfodpfx Afjxnlgceion Storage location: Garbsen

Condition: used, Year of construction: 1989, - Max. cutting height [mm]: 80 - Max. saw blade diameter [mm]: 350 - Max. spindle speed [rpm]: 3700 Hfsdjxaniwepfx Afisn - Year: 1989 - Documentation available: No - Serial number: 106 - Voltage [V]: 380 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, Number of motors 2x 1.2 kW Stück Hfedpfxsxmamnj Afisn 0 2800 mm Control ja 0 OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- Sold on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Technical manufacturer's description: Double miter saw for cutting two glazing beads simultaneously. The right saw unit is fixed; the left unit is adjusted via the positioning control. Features of the positioning control: - Monochromatic graphic display 240 x 64 pixels - Display of 30 characters on 8 lines - Keypad with 28 function keys - FN key for interrupting the function - Diagnostics and error messages - Language selection: Italian, German, British, Spanish, French, and Swiss - 10,000 memory lines divisible into 999 cycles, max. 99 lines per cycle - RS-232 interface - Dimensions can be entered manually or via USB interface - 3 correction values ??each for the left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on steel-hardened axes. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is complete, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. Machine features: - Fixed right-hand saw unit - Pivoting clamping device - Positioning control for TRF 527 NC CE - Maintenance unit - Center support - 220 mm Ø carbide-tipped saw blades - Two-hand control - Intermediate support for simultaneous sawing of two glazing beads - Pneumatic saw unit lift - Motor protection switch - Pressure switch - Undervoltage release - Overload switch - Tool set - 2 x 4-position angle star saw holders Technical specifications: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight 217 kg ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus VAT.

Condition: used, functionality: limited functionality, cutting height (max.): 90 mm, cutting width (max.): 140 mm, cutting length (max.): 2,820 mm, total width: 950 mm, total length: 3,600 mm, total height: 1,250 mm, saw blade diameter: 300 mm, type of input current: three-phase, rotational speed (min.): 3,000 rpm, OMGA TR2-A Double Mitre Saw for Wood and Aluminium Hedpfxjxl Ecxe Afisfn Specifications: • Condition - used, requires adjustments and minor repairs • Manufacturer - OMGA • Model - TR2-A • Main motors - 2 x 2.2 kW (3,000 rpm) • Pneumatic head control • Max cutting length - 282 cm • Min cutting length - 15 cm • Max cutting cross-section - 90x140 mm (at right angles) • Max blade diameter - 300 mm • Extraction nozzles diameter 80 mm • Angle cutting range from -45 to +45 degrees (right, left) • Vertical clamps for material hold-down • Weight - approx. 600 kg • Overall dimensions - 360 x 95 x 125 cm (L x W x H) Additional information: • Machine operational but requires minor fixes and adjustments • Provided photos show the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: used, OMGA T421 IDC000097 - saw blade diameter: 400 mm Hsdpfx Afju Dhupjiefn - complete with saw dust filter

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - max disc diameter 300 mm - spindle diameter 30 mm - blade covers 2 pcs Hfsdpfx Afemv E Hxsion - pneumatic cutting (disc movement up/down) - saw units adjustable at a 45° angle - manual spacing adjustment of saw units - min cutting length at 90° 220 mm - max cutting length at 90° 2820 mm - cutting width 110 mm - cutting height at 90° 90 mm - pneumatic clamps 2 pcs - control foot pedal - material support - main motor 2×1.6 kW - dimensions L/W/H 3620x1100x1250 mm - weight approx. 500 kg – unpainted – tilting saw units – used saw, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the EUR/PLN exchange rate 4.25 (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 1996, Offer 25115 Hfodswn D Emopfx Afijn Technical Data: - Saw blade diameter: 400 mm - Saw blade speed: 3000 rpm - Cutting height up to approx.: 125 mm - Cutting depth up to approx.: 600 mm - Bevel adjustable on 2 axes - Table size approx.: W 800 x D 800 mm - Table height: 920 mm - Drive: 400 V / 1.5 kW - Space requirement approx.: W 800 x H 1900 x D 1100 mm - Weight approx.: 200 kg

Condition: excellent (used), Omga V113P Double Mitre Saw for Frames Double saw set at a 45-degree angle Saw blade diameter: 300 mm Saw blade bore diameter: 30 mm Hfodpew T Rpzofx Afijn Two motors, each 1.1 kW Maximum cutting width: 70 mm Maximum cutting height: 75 mm Pneumatic material clamps Extended table on the right side

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, OMGA V 235 - precise cutting from the program, - with a controlled ruler, (with a stop) - 3.7Kw, 350mm sheet size. Hsdpfxew Tc Hro Afisfn

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Hfsdpot Uk Rmjfx Afijn

Condition: good (used), Year of construction: 2005, OMGA opti cut IDC000080 - Manufacturer: OMGA Hfsdpfx Afjt D Dukjijn - Year of production: 2005 - including table before and after - Control cabinet - Working condition

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Hodpfxody Hqvj Afisfn Motor 1.6hp, 3 phase CE Safety requirements

Condition: ready for operation (used), Technical characteristics Hfsdpfouciq Tex Afisn Distance between blades: 225 to 2800 mm Minimum distance between blades at 45°: 385 mm Cutting capacity at 90°: 140 mm Cutting capacity at 45°: 102 mm Max. cutting height: 90 mm Blade diameter: 300 mm Suction: 2 x 80 mm Pneumatic clamping system Simultaneous blade lowering Power and Motors Voltage: 380 V Pluging: Three-phased Power: 5 Kw Motor: 2 x 3 CV Overall dimensions Lenght: 4000 mm Width: 650 mm Height: 1400 mm Weight: 800 Kg

Condition: excellent (used), OMGA SP500 F Crosscut Saw Cutting width: 500 mm Cutting height: 150 mm Pneumatic saw feed Pneumatic material clamping Hsdpfsw Dy Shjx Afiefn Maximum saw blade size min/max: 490-500 mm Saw blade bore diameter: 30 mm Right table length: 200 cm Left table length: 200 cm Saw motor power: 5.5 kW CE certificate

Condition: ready for operation (used), Year of construction: 2000, saw blade diameter: 300 mm, cutting height (max.): 80 mm, cutting length (max.): 700 mm, type of input current: three-phase, total length: 132 mm, total height: 160 mm, total width: 104 mm, overall weight: 130 kg, mount diameter: 30 mm, height adjustment type: mechanical, OMGA RN700 Radial Saw Specifications: - condition - used - manufacturer - OMGA - model - RN700 - disc diameter max 300 mm - disc diameter min 295 mm - spindle 30 mm - saw motor - 2,94 kW - maximum dimensions of the cut piece 80 x 700 mm - guards on the saw for the safety of the saw operator - retracting cable for the body of the saw Hjdjuf R Huopfx Afiofn - adjustment of cutting in three planes - suction nozzle fi 80 mm - 2000 year of production - the machine meets CE standards - weight - 130 kg - overall dimensions - 132 x 104 x 160 cm ( W x L x H ) Additional information: - the machine is in excellent technical condition, ready for immediate use - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT and transportation costs

Condition: excellent (used), blade diameter 300mm motor power 1,6HP - 1,16kW max cutting dimensions 100x135mm Hjdpfx Asnr Hd Asfijfn angle cutting +/- 45 degrees

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, cutting height (max.): 100 mm, table length: 7,000 mm, TECHNICAL PARAMETERS maximum cutting width 300mm Hsdpfx Afjv Td R Usisfn maximum cutting height 100mm maximum element length 6m automatic material pusher cutting out defects with fluorescent pencil length of the feeding table 7m length of the cutting unit 1m length of the receiving table 1.7m maximum disc diameter 500mm engine power 8.9kw year of production 2004 power supply 400v

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Input table automatic feeding 5,10m (pusher system) Hodpevxu Rpofx Afiefn Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: ready for operation (used), Technical characteristics 3 milling cutters (independently deactivatable) for simultaneous notching on 3 sides Hjdpfx Afjtv Th Seiefn Pneumatic bar feed adjustable from 10 to 600 mm Work in continuous cycles of about 10 cycles/min Splinter guard system Automatic lubrication of the slides by centralized system Power and Motors Pluging: Three-phased Overall dimensions Lenght: 1830 mm Width: 1305 mm Height: 1330 mm Weight: 530 Kg

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 450 mm, cutting height (max.): 120 mm, cutting width (max.): 300 mm, rotational speed (max.): 3,000 rpm, saw blade bore: 35 mm, product length (min.): 600 mm, TECHNICAL DETAILS Maximum workpiece thickness: 120 mm Maximum workpiece width: 300 mm Minimum workpiece length: 600 mm Hedpevzyulefx Afisfn Example cutting sizes: 90 x 220 mm / 50 x 270 mm Feed & cutting cycle Maximum feed speed: 180 m/min Maximum acceleration: 15 m/s² Saw cycle time: 0.2 - 1 s Average number of cuts: 80 - 90 / min Feed motor power: 7.5 kW Saw blade & motor Saw blade diameter: 450 mm Saw blade bore: 35 mm Speed: 3,000 rpm Saw motor power: 5.5 kW Motor power: 5.5 kW Extraction Extraction connection: 200 mm

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 80 mm, cutting length (max.): 2,500 mm, total length: 7,470 mm, total width: 1,100 mm, overall weight: 450 kg, total height: 1,500 mm, type of input current: three-phase, main saw diameter: 340 mm, OMGA T720 crosscut saw Specification: - condition - used - manufacturer - OMGA - model - T720 - working width - 250 mm - working height - 80 mm - motor power - 2.2 kW - right table length - 400 cm ( 2 x 200 cm ) - left table length - 315 cm - tables with a width of 29 cm - pneumatic ratchets for cutting to the set length - 3 pcs. - adjustable cutting speed - max blade diameter - 340 mm - spindle - fi 40 mm - suction nozzle - fi 100 mm - weight - about 450 kg - overall dimensions - 742 x 110 x 150 cm (L x W x H) - body dimensions - 100 x 110 x 150 cm (L x W x H) Additional information: - very good, factory technical and visual condition - presented photos illustrate the actual state of the object of sale - possibility to turn on and check the device on site Hfedsr Ik I Aepfx Afien - the price given in the auction does not include VAT

Condition: excellent (used), functionality: fully functional, Omga V 113 P double miter saw for frames Double saw set at an angle of 45 degrees Diameter of saw blades 300 mm Diameter of saw hole 30 mm Hfsdevn I Iaepfx Afijn Two 1.1 kW engines Maximum cutting width 70 mm Maximum cutting height 75 mm Pneumatic material clamps

Condition: excellent (used), Year of construction: 1999, Good morning, We offer for sale an automatic radial arm saw from the excellent Italian company OMGA model RN700 To begin with, some useful information about the machine: * blade diameter in the range of 295 - 300 mm. * spindle 30 mm * saw motor 4.0 HP ( 2.9 kW ). * max dimensions of the cut element 80 x 700 mm * pneumatic pressures of the cut element - 2 pcs. * CNC controller for programming the parameters of the saw, including feed speed, width of cut * movement of the saw head on the stepper motor Hfodpfx Afon Nyfyoisn * own sawdust extraction * adjustment of cutting in three planes * very good technical and visual condition * safety guards and mushrooms for the safety of the saw operator. * 1999 year of production * overall dimensions 150 x 95 x 140 cm ( length x width x height ). * meets CE standards

Condition: ready for operation (used), OMGA V113P double saw for frames, strips Specification: • condition - used • manufacturer - OMGA • model - V113P • two 300 mm diameter discs permanently set at a 45 degree angle each • total power 2.2 kW (2 engines of 1.1 kW each) • spindles fi 30 mm • pneumatic clamps • cutting cross-section ~ 100 x 130 mm • original painting Hodswgdgnjpfx Afijfn • additional tables extending the tops by 100 cm (2 pcs.) • 1993 year of production • weight 225 kg • dimensions 80 x 142 x 132 cm cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 400 mm, cutting height (max.): 140 mm, cutting width (max.): 1,000 mm, height adjustment type: mechanical, OMGA 1000 radial saw Specification: • condition - after inspection, fully functional • manufacturer - OMGA • model - 1000 • blade diameter max 400 mm • max dimensions of the cut element 140 x 1000 mm • guards on the saw to ensure the safety of the saw operator • cutting adjustment in three planes • extraction port fi 80 mm and 110 mm • tabletop dimensions 160 x 95 cm • 1998 year of production • manufacturer's documentation Hfedpfx Afjv Hqknoisn • dimensions - 175 x 170 x 155 cm (length x width x height) Additional information: • the machine is in excellent technical condition, ready for immediate use • the photos presented show the actual condition of the subject of sale • possibility of switching on and checking the device on site • the price given in the auction does not include VAT and transport costs