Used Sinumerik 810 for sale (1,422)

Condition: used, Horizontal machining center with 2-fold shuttle table STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M serial no. 34 year of construction 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table surface 500 x 400 mm Tool holder ISO 40 Spindle speed max. 6300 rpm infinitely variable Main spindle drive 12 kW Mains connection 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Changing table with 2 stations Chedoutuyiepfx Agrod - Interface for data transfer - Coolant unit with chip conveyor Space requirement L x W x H 4100 x 2500 x 2650 mm Weight approx. 8 tons good condition Transport dimensions: Machine L x W x H 3200 x 2500 x 2650 mm, approx. 7.5 tons. Chip conveyor L x W x H 3500 x 1100 x 2100 mm, approx. 600 kg

Condition: ready for operation (used), Siemens 6FX1136-2BA01 SINUMERIK 810 MPC interface module, used, normal signs of use, 100% functional, scope of delivery as per photos Chodpfx Aoxagp Njgred

Condition: ready for operation (used), Siemens SINUMERIK 810 TFT Monitor LCD84-0019b, serial number S7999, used, in good condition, fully functional, delivery as shown in photos. Csdpfxsz Acr Ej Agrshd

Condition: good (used), CNC control, operator panel, LCD SIEMENS SINUMERIK 810 -Manufacturer: Siemens Csdpfx Aedpg T Rogrohd -Type: Sinumerik 810 M -Dimensions: 420/280/H350 mm -Weight: 9.7 kg

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: AB0704, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range X-axis: 810 mm Travel range Y-axis: 610 mm Travel range Z-axis: 610 mm Workpiece weight: max. 1,000 kg Table load: 1,000 kg Spindle speed: max. 8,000 RPM Chodpfxezzx Hco Agrod Number of tool positions in the tool magazine: 32 MACHINE DETAILS Control model: Siemens Sinumerik 810D Total weight: 5,000 kg Input voltage: 400 V Type of input current: Three-phase EQUIPMENT CE marking Chip conveyor Spindle speed continuously adjustable 20 bar spindle cooling Paper filter Shopmill Note: The machine has been regularly maintained. One slot in the tool changer is defective.

Condition: used, PLC, control panel, operator panel, control machine -Handover in the current state (broken glass) -The device is sold as working -Manufacturer: SIEMENS Codpfodpmmysx Agrohd -Type: Sinumerik 810D/840D PCU50 -Dimensions: 482/310/H140 mm -Weight: 11.5 kg

Condition: used, functionality: fully functional, input voltage: 24 V, Siemens SINUMERIK OP 015 black 15.6-inch operator panel – 6FC5303-0AF14-0AA0 Cedpfx Age Ah Exlorohd Industrial operator panel front with a capacitive touchscreen, integrated keypad, and thin-client function for SINUMERIK CNC controls. Manufacturer: Siemens Product series: SINUMERIK Model: OP 015 black Article number: 6FC5303-0AF14-0AA0 Device type: CNC operator panel front / Operator Panel Screen diagonal: 15.6 inches (39.6 cm) Display type: LCD color display Aspect ratio: Widescreen Resolution: 1366 x 768 pixels Touch technology: Capacitive multi-touch Operation: Multi-touch and integrated capacitive keypad Keypad: Alpha, numeric, cursor, and control keys Control interface: Integrated TCU (Thin Client Unit) Network interface: Ethernet 10/100/1000 Mbps USB ports: 3 x USB on the rear Communication: Ethernet connection to PCU/NCU Supply voltage: 24 V DC Power consumption: Typical 24 W, maximum 42 W Protection rating (front): IP65/IP66 Protection rating (rear): IP20 Operating temperature (front): 0 to +45 °C Operating temperature (rear): 0 to +55 °C Dimensions (W x H x D): 483 x 310 x 48 mm Installation depth: 37 mm Mounting cutout (W x H): 450 x 290 mm Permissible mounting panel thickness: 1.5–6 mm Weight: Approx. 7 kg Mounting type: Panel mounting with rear-mounted clamping elements Condition: Used

Year of construction: 2021, condition: used, ZELLWAG LIQUID FILLING MACHINE-RTU, MODEL Z 810 R2 Specifically engineered for automated aseptic handling and fill-finish of Ready-To-Use (RTU) syringes, cartridges, and vials. Currently equipped for vials. - advanced modular technology is designed to mitigate any potential microbiological contamination, while offering flexibility and swift changeover - excellent accessibility for effortless operation and cleaning - accompanied by a comprehensive set of (GMP) documentation Cjdpfxo Ad Nx Eo Agrshd CHARACTERISTICS Output: 160 unit/min Electricity usage: 400V 3 PE N Compressed air: 6 bar, 100 L/min

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm Chodpfsy Sub Hjx Agred • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: used, Year of construction: 2012, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 620, table width: 900 mm, table length: 400 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 23, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This vertical machining center, a Saeilo Contur MMV 810 S, was manufactured in 2012 and is equipped with a Heidenhain TNC 620 control unit featuring an electronic handwheel for precise operation. Travel ranges are X = 810 mm, Y = 400 mm, Z = 500 mm, with a table measuring 900 x 400 mm and fitted with 3 T-slots (size 14 mm). The machine includes a double-arm tool changer with 23 positions, BT40 tool holder, and a high-performance spindle capable of up to 10,000 rpm, oil cooling, and an internal coolant supply system with 20 bar pressure. Chodox N E Acspfx Agred Spindle speed: 0-10,000 rpm Axis travels: X: 810 mm Y: 400 mm Z: 500 mm Double-arm tool changer with 20 positions Tool holder: BT40 Spindle oil cooling // Internal coolant supply 20 bar Disc-type scraper in coolant tank Air blast cooling through or around the spindle External coolant gun Chip conveyor (spiral type) Central lubrication system Table clamping surface: 900 x 400 mm with 3 x 14 mm T-slots Machine weight: 3,500 kg Includes documentation.

Condition: new, Year of construction: 2026, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, NEW 2026 – REM SC 44 CNC 2SF | Heavy-Duty CNC Vertical Turning Center Top-of-the-range CNC Vertical Turning Center from REM Bacau, featuring dual milling heads, dual automatic tool changers and Siemens Sinumerik 840D SL control. Built for the most demanding heavy machining applications. TURNING ENVELOPE: • Faceplate Diameter: 4,000 mm • Machining Diameter: 4,400 mm • Machining Height: 2,000 mm • Max. Workpiece Weight: 16,000 kg AXIS TRAVELS: • X-Axis (Ram Carriage): 2,500 mm • W-Axis (Elevating Cross Rail): 1,200 mm • Z-Axis (Ram Vertical Travel): 1,250 mm • Indexing Step: 300 mm WORK TABLE: Chodpfx Ajg Uwmqjgrod • Diameter: 4,000 mm | Speed: 1–60 (90) rpm • Power (S1): 100 kW | Torque: 110,000 Nm • C-Axis: 0.02–1.5 rpm | C-Axis Torque: 55,000 Nm MILLING RAM (250×250 mm | KM 63 / ISO 50): • Ram Speed: 0–2,500 rpm | Power: 40 kW | Torque: 1,400 Nm TOOLING: • 2× ATC Magazine (12 turning + 12 milling tools each) • Control: Siemens Sinumerik 840D SL Manufactured by REM Bacau – Romania | 60+ years of expertise. Fully inspected and tested. Export worldwide. Contact us for pricing, videos, and full specs.

Condition: excellent (used), Year of construction: 2019, Duplo DuSense DDC-810 coating and embellishment machine year 2019 - first installation 2021 very good condition - sparingly used Csdezy Na Rspfx Agrohd counter reading only 25,000 sheets covered by a maintenance contract until 2026 - latest software corona unit

Condition: as good as new (ex-display), functionality: fully functional, 1. Machine Specifications * 2 work tables with pallet changing system - Clamping area: 630 x 630 mm - Threaded holes: 23 x M16x30 - Max. clamping weight: 1000 kg * Travel ranges - Table longitudinal adjustment (x): 850 mm - Support vertical adjustment (y): 710 mm - Column transverse adjustment (z): 710 mm * Max. feed rate: 10 m/min * Rapid traverse: 15 m/min * Working spindle - Tool interface: SK 50 DIN - Drive power: 22 kW AC - Torque: 660 Nm - Speed range, stepless: 20 ... 6000 rpm * Coolant supply through the spindle center: 10 bar * Tool magazine: 60 positions * Control system: Sinumerik 850M, software version 4.5 * Feed and main drive: AC Indramat * Footprint (L x W x H): 4100 x 6000 x 3500 mm * Work area protection 2. Technical Condition The machine has never been used in production!!! It is an unused machine – no production hours. Therefore, the machine meets all technical parameters within the acceptance conditions for new machines. 3. Warranty: Last inspection 04/2026, 6 months 4. Prices: * Machine: €120,000.00 * Spare parts package: included Chjdpfx Ajz H Tqwogrod * Assembly/Commissioning: €7,500.00 (for assembly/commissioning abroad, travel expenses will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works, excluding VAT. We reserve the right to sell the machine in the meantime. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order 60% upon delivery 10% upon handover * Delivery time: 4 weeks Manfred Friedrich Export / Import Clemens-Winkler-Str. 6, 09116 Chemnitz The following spare parts can be supplied: Indramat motor - 2 AD 132D-BO50 R2-AS 03 - MAC 093 A-0-LS-2-C/130-A1 - MAC 112D-0-HD-4-C/180-BO - MAC 112C-0-KD-2-C/180-A-2 Indramat controller - TBM 1.2-40-W 1/220 V - TDM 1.2-100-300-W1 - TVM 2.2-050-220/300-W1 Heidenheim length measuring system LS403-820 2x - LS403-1020 Tool holders DIN SK 50 - 60 pieces Roller guide element 26 110 - 25 pieces

Condition: new, Siemens SINUMERIK Handheld Terminal HT 8 with handwheel – 6FC5403-0AA20-1AA1 Chsdpfszcgwgox Agrod New Siemens handheld operating unit for SINUMERIK CNC controls. The original packaging was opened solely for the purpose of taking photographs. Manufacturer: Siemens Product series: SINUMERIK Type: HT 8 Article number: 6FC5403-0AA20-1AA1 Device type: Handheld terminal / handheld operating unit Design: With handwheel Weight: 1.75 kg

Year of construction: 2019, condition: excellent (used), Buchi C-810 flash chromatography system in excellent condition. Binary pump with gradient, flow rate 0–250 ml/min up to 50 bar. UV detector, wavelength range 200–800 nm. Year of manufacture: 2019. Dimensions: 36 × 57 × 68 cm (H). Weight: 25 kg. Csdpfx Aoxn Rtbegrohd

Condition: repair required (used), Year of construction: 2017, functionality: not functional, AS-07251-Alfa Laval Clarifier Module 10 m3/h ALFA-LAVAL PURE SOX (SWPX 810 SGV-34CGL) CLARIFIER MODULE, 316SS. Capacity min. 10,000 L/H Offering 4 identical units INCOMPLETE! Only for spare parts (Machine without bowl) Cedpfxew Ap I Ae Agrohd Max. bowl speed 7200 RPM, rated at 10,000 LPH, bowl volume 15 L, sludge capacity 9.4 L, liquid discharged under pressure, solids discharge pump with cyclone tank, 35 kW motor 460/3/60/1728 RPM, Pure SOx scrubber, unitized on a common skid with all valves, piping, control panel, tools, spares, and manual Year of Manufacture 2017

Condition: refurbished (used), 1. Machine Specifications * 2 work tables with automatic pallet changer - Clamping area 400 x 400 mm - Perforated pallets - Max. clamping weight 400 kg - NC rotary table - Rotatable clamping position * Travel ranges - Column longitudinal travel (x) 650 mm - Support vertical travel (y) 500 mm - Table transverse travel (z) 650 mm * Max. feed rate 36 m/min * Rapid traverse 40 m/min * Working spindle - Tool interface - SK 40 DIN 69871 - Drive power 24 kW AC - Torque 230 Nm - Speed range, stepless 0 ... 10000 rpm * Coolant supply through the spindle center 50 bar * Tool magazine 60 positions * Control system Sinumerik 840 D * Machine bed made of mineral cast * Enclosed work area protection * Chip conveyor * Paper band filter system 2. Technical Condition The machine was only used in production until February 2013! Due to the overhaul, the machine meets the acceptance conditions for new machines. - The machine was completely disassembled and cleaned. - All compact guides and ball screw drives were replaced. - The main drive motor and feed motors were inspected in authorized workshops and, if necessary, refurbished. - The main spindle body was replaced with a new one, the spindle was re-bearinged, and run-in on the test stand. - All cables, air lines, and defective sensors were replaced. - Table assembly, magazine, tool changer, and coolant system were overhauled. - The panes of the work area protection were renewed, and a new paint job was applied. In addition, a new main spindle and a new Kessler motor can be supplied as spare parts. 3. Warranty: last inspection 03/2013; 3 months 4. Prices: * Machine €110,000.00 * Installation/Commissioning €6,000.00 (for installation/commissioning abroad, travel costs will be added) 5. Delivery Conditions: * Pricing: Prices are quoted net for delivery or service ex works. We reserve the right to sell the machine in the interim. Our delivery and service terms and conditions apply. * Payment terms: 30% down payment upon order against invoice Chodpfxoz H Tn Ae Agred 60% upon delivery 10% upon handover * Delivery time: 4 weeks

Condition: like new (used), Year of construction: 2026, functionality: fully functional, overall weight: 12,000 kg, ECHNICAL DESCRIPTION: Chedpfx Ajz Drbpsgrsd Max. Module 5/6 Max Diam. Ext. Nominal 300mm Maximum axial hob slide travel(Z) 360mm Maximum hob head swivel angle ± 35 deg Max. Hob Length 180mm Max. Hob Diam 150mm Max. Hob Shift 200mm Max. Hob speed 1000rpm Max. table rotation 500rpm EQUIPMENT: - Sinumerik One - Dialog Program - Table with Direct Drive – Chip conveyor – Lubrication and hydraulic unit – Full coverage of the workspace – Documentation

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  - manufacturer: Krones, Germany - model: Contiroll HS 810-720     - year of manufacture: 2015 - neck handling machine, modification possible - formats: 1,5L and 2,0L - labelling applicators: 1 (wet-glue head), 2 magazines - operation Direction: Right-machine,  - production Capacity: 50.000/h Chsdpsyhgwdefx Agrsd - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Condition: used, Year of construction: 2015, Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical Data:  - manufacturer: Krones, Germany - model: Contiroll HS 810-720     - year of manufacture: 2015 Cedpfx Asyhgvgjgrjhd - neck handling machine, modification possible - formats: 1,5L and 2,0L - labelling applicators: 1 (wet-glue head), 2 magazines - operation Direction: Right-machine,  - production Capacity: 50.000/h - Worked Labels: IN REEL - Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC

Condition: used, CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Testing System CSR-60/810/S | -60 °C to +170 °C 39.6 kW | Test chamber 1200 L Description: For sale is a professional climate and temperature testing system from CTS GmbH, consisting of a CSR-60/810/S type conditioning unit and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations over an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, consisting of: Conditioning unit (CSR-60/810/S) External test chamber (Test chamber 1200 L) The system is designed to supply external test rooms or test chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, lifetime testing). Technical data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of construction: Temperature & Climate Temperature range: -60 °C to +170 °C Humidity range: 10 % to 80 % RH Dew point range: +5 °C to +74 °C Electrical data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse: 80 A slow-blow Connection type: Fixed connection Refrigeration system Refrigerant: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L Chsdpfxjzimgao Agred Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), operating hours: 651 h, lifting height: 210 mm, free lift: 210 mm, fuel type: electric, fork length: 1,150 mm, fork width: 520 mm, total height: 1,300 mm, color: other, Year of construction: 2019 GVW: 458 kg Lifting capacity: 1.400 kg NEW BATTERY CELLS 24V 2PzB 150Ah, Built-in 220V high-frequency charger, NEW WHEELS, Fork size 1150 x 520 mm, Fork distance 190 mm, Single fork wheels, NEW wheels, Codpe Ad Rxajfx Agrshd

Year of construction: 2011, condition: as good as new (ex-display), For sale is a soundproof emergency generator: Technical data: Condition : Like new ! Manufacturer : VISA ONIS Model : MA790 SS Engine : MAN 2842 LE 213 Generator : Marelli Power : 810 KVA RPM : 1500 rpm Frequency : 50 Hz Voltage : 230/400 Volt Operating hours : 50 operating hours Csdpfx Aop Auywjgrshd Year of manufacture : 2011 - Complete with control with automatic start function - Incl. diesel tank 900 liters in base frame - Immediately available

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), Equipment: cabin, pallet forks, standard shovel, KINGWAY LANDER 810 – Professional Farm Loader with Kubota Engine | 1,400 kg Lifting Capacity | Hydrostatic Drive The KINGWAY LANDER 810 is a powerful and compact farm loader for professional use in agriculture, construction, gardening and landscaping, and municipal operations. Equipped with the proven Kubota V1505 4-cylinder diesel engine, hydrostatic drive, and all-wheel drive, the LANDER 810 impresses with its high performance, low fuel consumption, and maximum operator comfort. With a lifting capacity of up to 1,400 kg, a lifting height of up to 3,225 mm, and a powerful hydraulic system, the LANDER 810 is ideal for daily loading, transport, and material handling tasks. Thanks to its compact design, the machine operates safely and efficiently even in confined spaces. Standard Equipment Enclosed safety cab (ROPS/FOPS) Kubota V1505 diesel engine Hydrostatic drive All-wheel drive Differential lock 2 travel ranges Hydraulic quick coupler Euro attachment Additional hydraulics Float position Electric joystick control Adjustable steering column Suspended comfort seat Rear view camera Radio Heater Ventilation LED work lights front and rear Road lighting Lockable cab Lockable engine hood Lockable fuel tank Opening rear window Heavy-duty axles Boom lowering safety device Technical Data Engine Kubota V1505 4-cylinder diesel engine Displacement: 1,498 cm³ Power: 18.5 kW (25 hp) Max. torque: 94 Nm Rated speed: 2,200 rpm Emission standard: Euro V Water-cooled Electrical System 12 V electrical system 60 Ah battery Drive System Hydrostatic drive All-wheel drive Differential lock 2 travel ranges Maximum speed: 20 km/h Inch pedal Hydraulics Hydraulic flow rate: 60 l/min Hydraulic pressure: 200 bar Hydraulic oil tank: 40 l Hydraulic pump: Bondioli & Pavesi Hydraulic circuit Float position Hydraulic quick coupler Euro attachment Performance Data Maximum lifting capacity: 1,400 kg Maximum lifting height: 2,800 mm Maximum lifting height (extended): 3,225 mm Dump height: 2,200 mm Dump angle: 80° Bucket volume: 0.26 m³ Bucket width: 1,300 mm Climbing ability: 20° Dimensions Length without bucket: 3,600 mm Length with standard bucket: 4,200 mm Width: 1,300 mm Height: 2,300 mm Wheelbase: 1,550 mm Ground clearance: 240 mm Steering angle: 40° Operating weight: 2,620 kg Tires Standard tires: 31×15.5-15 Agricultural tread pattern optional Turf tread pattern available at extra cost Industrial tread pattern available at extra cost Max. tire pressure: 3.1 bar Product Advantages Original Kubota V1505 engine Hydrostatic drive Enclosed ROPS/FOPS safety cab 1,400 kg lifting capacity Lifting height up to 3,225 mm Powerful hydraulics with 60 l/min Hydraulic quick coupler as standard Euro attachment as standard Bondioli & Pavesi hydraulic pump All-wheel drive with differential lock Compact design High maneuverability Cedpezpvt Aofx Agrehd Low operating costs Comfortable joystick control Robust steel construction Ideal for daily professional use Warranty and Service 12-month manufacturer's warranty Warranty extension up to 3 years possible Our own mobile service throughout Germany Spare parts directly from our German warehouse Professional workshop and repair service

Condition: excellent (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, Sheffield HC-810 Automatic Hot/Cold Strip Cutting Machine with PF-33 Automatic Prefeeder For sale: Sheffield HC-810 industrial automatic hot/cold cutting machine, supplied together with the Sheffield PF-33 automatic prefeeder. The machine is designed for precise and efficient cutting of webbing, straps, tapes, ribbons, and other textile materials. The hot cutting function allows synthetic materials to be cut and heat-sealed simultaneously, preventing fraying and ensuring clean, durable edges. The equipment is suitable for industrial textile production, including the manufacture of tactical equipment, belts, straps, bags, backpacks, and other products requiring accurate, repeatable cutting. Main features: * Automatic hot and cold cutting * Maximum cutting width: 6¼ inches (approx. 159 mm) * Electronic control panel * Programmable cutting length * Adjustable feeding speed * Automatic piece counter * Adjustable blade dwell time for thicker materials * Automatic material feeding * Precise and repeatable cutting operations * Suitable for nylon, polyester webbing, straps, ribbons, and similar materials * 220 V version Included equipment: * Sheffield HC-810CE-220V automatic hot/cold cutting machine * Sheffield PF-33-220V automatic prefeeder * Original operating manual * Additional accessories and parts shown in the photographs Automatic feeding system: The Sheffield PF-33 prefeeder facilitates the feeding of material from rolls, ensuring a consistent material supply during automatic cutting operations. The combination of the HC-810 cutting machine and PF-33 prefeeder provides an efficient solution for repetitive industrial cutting tasks, reducing manual handling and improving production consistency. Technical condition: The machine is 100% fully functional, in excellent working condition, and ready for immediate use. All functions operate correctly. The equipment requires no repairs and is ready to be integrated into a production process. The machine is used but remains in very good overall condition, with normal signs of industrial use. Chsdpfez Nyv Tjx Agrjd Additional information: * Manufacturer: Sheffield Cutting Equipment * Model: HC-810CE-220V + PF-33-220V * Year of manufacture: 2024 * Purchase date: February 2025 * Condition: Used, fully functional * Availability: Immediately available * Location: Gdańsk, Poland The machine can be inspected and tested by prior appointment. The equipment is offered as a complete cutting and feeding system, including the accessories shown in the photographs.