Shandong Tiantai 2x 1000 L, 1x 7 BBL (820 L) Fermentation and storage cellar (2019)

Shandong Tiantai Gär- und Lagerkeller

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control Iisdpfx Ajftm Hropcjg - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Year of construction: 2011, pressure: 13 bar, operating pressure: 13 bar, For sale: Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture: 2011. Steam output: 360 kg/h. Maximum steam pressure: 13 bar. Delivery available at extra cost. Inspection on site possible. Please contact us if you have any questions. Ijdeydqxdepfx Apceig

Condition: used, Year of construction: 2018, Overview  The Gruber AFD6 is a filling machine for bottles and party KEGs that was produced by the German manufacturer Gruber in 2018 and has an operating time of 725 hours. The machine is available immediately. Technical details - Output - 800 bph (at 0.33l) - 750 bph (at 0.5l) - 600 bph (with 1.0l) - 400 bph (for 2.0l) - 240 bph (with 5.0l party KEG) - Output varies depending on CO2 content and beer temperature (in practice, 1,000 bph could be achieved at 0.33l) - Long tube filler with 6 filling points - Fully automated filling process - Single or double CO2 flushing - Siemens S7 control system with touch panel Iisdpou I Hr Usfx Apcog - Operating hours: 725 hours

Condition: excellent (used), Year of construction: 2013, 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Junior 102 SC EG Steam output: 120 kg/h Max. thermal output: 79 kW Operating overpressure: 10 bar Water content: 9.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2013 Equipped with Certuss gas burner, gas control section, control cabinet mounted on boiler body, and existing coarse and fine fittings Iisdpsyfg Htofx Apcjg With feedwater module mounted on base frame consisting of: control cabinet, stainless steel feedwater tank, steam dryer, dosing vessel, Speck feedwater pump and sample water cooler

Condition: excellent (used), Year of construction: 2018, operating hours: 20,000 h, fuel type: gas, output voltage: 6,300 V, output frequency: 50 Hz, Jenbacher J620 natural gas generator. Complete power plant: - Generator - Heat exchanger - Control panels - High-tension (HT) and low-tension (LT) pumps and valves - High-tension (HT) radiator and low-tension (LT) cooling tower - Gas train - Silencer - Oil pumps - Circuit breakers All official reports are available. Iiodpozdtzyofx Apcsg Borescope photos are available. If you are interested, please do not hesitate to arrange an inspection at any time. Status: Currently dismantled and stored in a warehouse.

Year of construction: 1999, condition: used, 4 upright fermentation vats with jacket cooling Additional title: vertical, coolable, stainless steel vessels Max. content: 2500 l Length: 1600 mm Width: 1600 mm Height: 1717 mm Operation / Control: manual Iiodpsxwy Slefx Apcsg Material: stainless steel 1.4301 Position: free standing Base construction: cylindrical vessel, open at the top, with square tube feet on domes Features: Shell cooling, automatic-valve with temperature control, central bottom outlet with shut-off valve

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Iisdpfx Aeytg Rbepcjg Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Ijdpfxoztwz Aj Apcjig Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: used, Year of construction: 2013, 2-roller mill with grist bin and 2 pipe chain conveyors. Malt extraction and milling capacity approx. 500 kg/h, malt milling transport capacity for mashing approx. 1000 kg/h. Additional title: with grist bin and pipe chain conveyors Malt transport capacity approx.: 500 kg/h Malt mill capacity approx.: 500 kg/h Maltgrist transport capacity: 1000 kg/h Maltgrist bin capacity approx.: 450 kg Position: Installation at ground level, mill on top of the grist bunker Features: 1 pipe chain conveyor from the silo to the grist mill, 1 pipe chain conveyor from the grist bunker to the mash tun, 1 malt grist mill, 1 grist bunker Iiodjw Tdygopfx Apcsg

Condition: used, Year of construction: 2017, Overview  Iiedpfxoyb R Ite Apcsg This 5/10hl 3-device brewhouse was manufactured in 2017 by the Austrian manufacturer Labu. The brewhouse has various automation features such as automatic starting, automatic sparging and automatic spent grains discharge. It is currently available for sale, including additional equipment. Technical data  - Capacity: 5/10hl - Electrical heating: 27kW / 400V (special ceramic heating element) - Equipment: - 3 appliances: brewing kettle, lauter tun, whirlpool - Additional equipment included: - Manual filler (wall-mounted) - Keg filler - 2 fermentation and storage tanks (650L each) - 1 fermentation and storage tank (1200L) - All tanks from L-Inox, equipped with jacket and cone cooling (3 bar operating pressure, tested up to 4.5 bar) - Glycol cooler - Plate heat exchanger Scope of delivery  - 1x 5/10hl 3-device brewhouse (brewing kettle, lauter tun, whirlpool) - 1x manual filler (wall-mounted) - 1x keg filler - 2x fermentation and storage tanks (650L, L-Inox, with jacket and cone cooling) - 1x fermentation and storage tank (1200L, L-Inox, with jacket and cone cooling) - 1x glycol cooler - 1x plate heat exchanger