Used Sinumerik 820 for sale (1,554)

Condition: ready for operation (used), Siemens 6FX1130-5BA00 Sinumerik PLC Software EPROM Module E Stand B used, 100% functional Pgodpfexagpvex Amyop

Condition: new, Siemens Sinumerik 840D NCU 571, in original packaging with seal opened, E-version see photo, 100% functional. Podpfxsxahuge Amyjgp

Condition: ready for operation (used), Siemens Sinumerik 880 PLC 6FX1138-6BB00 / 570 386 9002. E-Stand E 00, used, minor signs of wear, 100% functional, scope of delivery as per photos Pedpfx Aoxahumjmyjgp

Condition: ready for operation (used), Siemens SINUMERIK 6FC3988-7AH20 monitor, version: B, SN: T-P42032513, used, in good condition, 100% functional, delivery scope as per photos. Podpfxey Ntais Amyegp

Condition: ready for operation (used), Siemens 6FC5110-0BA01-1AA0 Sinumerik NC CPU card 580 231 9101.01 E, version D / 570 521 9101.00 E, version A, used, 100% functional. Pgjdpfx Aei Edx Somyep

Condition: new, Siemens 6FX1120-3BC01 Sinumerik module board, version G, unused!!! in open original packaging, 100% functional. Pgsdei Ed N Hopfx Amyop

Condition: new, Siemens 6FX1121-8BB02 Sinumerik Sirotec circuit board in opened original packaging, 100% functional. Pjdpfxoi Ed Rks Amysgp

Condition: new, Siemens Sinumerik 6FC5111-0BA00-0AA0 measuring circuit module Version B in unopened original packaging, 100% functional. Pgjdpfx Asxahtpemysp

Condition: ready for operation (used), Siemens SINUMERIK 802C 6FC5500-0AA11-1AA0 operator panel version C SN: C-A5E01169222, used, signs of use, 100% functional, scope of delivery as per photos Podpfjxaht Njx Amyegp

Condition: ready for operation (used), Siemens SINUMERIK S3 TFT Monitor LCD84-0028a, serial number S4350, used, in good condition, 100% functional, scope of delivery as per photos. Pgodpoy U Eh Asfx Amyop

Condition: ready for operation (used), Siemens SINUMERIK 810 TFT Monitor LCD84-0019b, serial number S7999, used, in good condition, fully functional, delivery as shown in photos. Podpfx Amjy Ntavjysgp

Condition: ready for operation (used), Siemens 6FX1122-8BB01 Sinumerik FBG digital output card, used, 100% functional Pgjdpsxagnxjfx Amyjp

Condition: ready for operation (used), Siemens 6FX1144-2BA00 Sinumerik interface E version B SN 580, used, in good condition, 100% functional Pgedpexagqtjfx Amyep

Condition: new, Siemens 6FX1144-2BA00 Sinumerik Connection Interface Module Version B < unused - in opened original packaging, 100% functional Psdpoxagq Hjfx Amyjgp

Condition: ready for operation (used), Siemens SINUMERIK 548 025.9015.04 System 3 operator panel with control unit SN: A1452596, used, in good condition, 100% functional, scope of delivery as per photos. Pgodox Eu N Dopfx Amysp

Condition: ready for operation (used), Siemens 6FX1113-0AA00 Sinumerik System 8 SM100 CPU, version F, used, 100% functional. Psdpfsi Ed Izex Amyegp

Condition: new, New Siemens NCU box for SINUMERIK CNC controls. The original packaging has been opened. The device is unused. Psdpfozcg Acox Amyjgp Manufacturer: Siemens Product series: SINUMERIK Type: NCU box Article number: 6FC5247-0AA00-0AA3 Device type: NCU box / control housing for SINUMERIK systems.

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system Pgedsgqfmnepfx Amyjp STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: new, Year of construction: 2026, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SCR 44 2SF, NEW 2026 – REM SC 44 CNC 2SF | Heavy-Duty CNC Vertical Turning Center Top-of-the-range CNC Vertical Turning Center from REM Bacau, featuring dual milling heads, dual automatic tool changers and Siemens Sinumerik 840D SL control. Built for the most demanding heavy machining applications. TURNING ENVELOPE: • Faceplate Diameter: 4,000 mm • Machining Diameter: 4,400 mm • Machining Height: 2,000 mm • Max. Workpiece Weight: 16,000 kg AXIS TRAVELS: Pgjdpfx Ameg Uwmqoyjp • X-Axis (Ram Carriage): 2,500 mm • W-Axis (Elevating Cross Rail): 1,200 mm • Z-Axis (Ram Vertical Travel): 1,250 mm • Indexing Step: 300 mm WORK TABLE: • Diameter: 4,000 mm | Speed: 1–60 (90) rpm • Power (S1): 100 kW | Torque: 110,000 Nm • C-Axis: 0.02–1.5 rpm | C-Axis Torque: 55,000 Nm MILLING RAM (250×250 mm | KM 63 / ISO 50): • Ram Speed: 0–2,500 rpm | Power: 40 kW | Torque: 1,400 Nm TOOLING: • 2× ATC Magazine (12 turning + 12 milling tools each) • Control: Siemens Sinumerik 840D SL Manufactured by REM Bacau – Romania | 60+ years of expertise. Fully inspected and tested. Export worldwide. Contact us for pricing, videos, and full specs.

Condition: used, Year of construction: 2009, functionality: limited functionality, turning diameter over cross slide: 830 mm, turning length: 1,250 mm, turning diameter: 580 mm, spindle bore: 103 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 8 rpm, Equipment: rotational speed infinitely variable, Complete CNC component set Siemens 802 D – bed and guide rails ground Psdpfx Amey Sub Hsyogp Description: CNC component set / machine construction kit with Siemens Sinumerik 802D control. The machine is in an advanced state of reconstruction. Sold as pictured as a DIY project for completion. All components are present. Key highlights: • Mechanics: The machine bed and support have already been freshly ground and painted in RAL 5015. • Geometry: The mechanical geometry has already been professionally restored (optimal basis for high precision). • Control: Includes a functional Siemens Sinumerik 802D CNC control. • Feed drive SIEMENS, main motor regulator from Siemens • Completeness: All related parts and assemblies are in stock and ready. Perfectly suited for the reconstruction of a precise CNC machine. Sold ex-works as inspected, without warranty. Technical data of the metal lathe MEXPOL TUB 830 C in the condition it was in before being disassembled: • Maximum turning diameter over bed: 830 mm • Maximum turning diameter over slide: 580 mm • Maximum bar diameter: 103 mm • Maximum turning length between centers: 1250 mm • Rapid traverse rate in X/Z axis: 10 m/min • Spindle speed range: 8–2000 rpm • Number of steps for adjusting the spindle speed: 3 • Diameter of the front spindle bearing: 140 mm • Power of the spindle drive: 15 kW • Maximum spindle torque: 2100 Nm • Bed width: 520 mm • Height of the centers above the bed guides: 420 mm • Diameter of the tailstock quill: 105 mm • Extension of the tailstock quill: 200 mm • Taper of the tailstock quill: Morse 6 • Drive of the X-axis: SIEMENS motor (torque X-axis: 11 Nm) • Drive of the Z-axis: SIEMENS motor (torque Z-axis: 18 Nm) • Coolant pump capacity: 25 l/min • Power of the coolant pump motor: 0.18 kW • Speed of the coolant pump motor (50 Hz): 2800 rpm • Installed power: 22 kW • Power supply: 3x 400 V; 50 Hz Equipment of the lathe TUB 830C: • CNC control: SIEMENS SINUMERIK 802D Sales and delivery conditions: • Loading: Loading onto your transport vehicle is included in the price. • Delivery: Ex-works Hilden. • Validity: The offer is subject to change – subject to prior sale (valid only while stocks last).

Condition: good (used), Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimensions: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm Scope of delivery includes: 02x workbench uprights, used Material finish: Sendzimir galvanized Upright height: 900 mm Upright depth: 800 mm Upright profile: 100 x 100 x 3.00 mm Including horizontal and diagonal struts, base plates Uprights are pre-assembled (bolted truss framework) 04x workbench beams, used Material finish: Sendzimir galvanized Box section: 100 x 50 mm Beam type: BX100/50/15 Clear span: 1,140 mm 08x safety pins, used Design: fully galvanized Pjdpfow Hpfiox Amyjgp 01x chipboard panel, used Chipboard thickness: 38 mm Chipboard width: 1,350 mm Chipboard depth: 820 mm Panel is single-piece 01x chipboard panel, used Chipboard thickness: 38 mm Chipboard width: 1,120 mm Chipboard depth: 820 mm Panel is single-piece 12x self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm Images are for material illustration purposes only. Material color may differ. - The workbenches are picked and supplied unassembled; - The workbench uprights are pre-assembled; - Standard production time is approx. 3 - 5 working days. General information about the item: This item is only offered for collection. If shipping or transport is required, additional costs will apply. These can be requested individually from us, depending on delivery location and scope of delivery.

Condition: good (used), Technical Data for the Workbench: Manufacturer: Dexion Model: Speedlock P90 Dimensions: Width: approx. 1,665 mm Height: approx. 938 mm Depth: approx. 820 mm Scope of delivery includes: 02x workbench uprights, used Material finish: Sendzimir galvanized Upright height: 900 mm Upright depth: 800 mm Upright profile: 100 x 100 x 3.00 mm Includes horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) 04x workbench beams, used Material finish: Sendzimir galvanized Box section: 89 x 50 mm Beam type: SLO089|2 Clear span: 1,445 mm 08x locking pins, used Version: fully galvanized 01x chipboard panel, used Chipboard thickness: 38 mm Chipboard width: 1,665 mm Chipboard depth: 820 mm Chipboard is in one piece 01x chipboard panel, used Chipboard thickness: 38 mm Chipboard width: 1,425 mm Chipboard depth: 820 mm Chipboard is in one piece 12x self-drilling screws, new Version: galvanized Dimensions: 6.3 x 70 mm The pictures are for illustrative purposes only. Material color may vary. Pgsdpfx Amsw Hphkeyep - Workbenches are dispatched unassembled; - Workbench uprights are pre-assembled; - Usual production time is approx. 3 – 5 working days. General information about the item: This item is only available for collection. Any additional transport or shipping of this item can be arranged at extra cost, which can be requested from us based on the delivery location and scope.

Condition: good (used), Technical data for the workbench: Manufacturer: Dexion Type: Speedlock P90 Dimensions: Width: approx. 1,350 mm Height: approx. 938 mm Depth: approx. 820 mm Scope of delivery includes: 02x Workbench uprights, used Material finish: sendzimir galvanized Upright height: 900 mm Upright depth: 800 mm Upright profile: 100 x 100 x 3.00 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted lattice frame) Pgedpew Hpv Usfx Amyep 02x Cross beams for workbench, used Material finish: sendzimir galvanized Box profile: 89 x 50 mm Beam type: SLO89|2 Clear span: 1,140 mm 04x Safety pins, used Design: fully galvanized 01x Chipboard top, used Chipboard thickness: 38 mm Chipboard width: 1,350 mm Chipboard depth: 820 mm Chipboard one-piece 06x Self-drilling screws, new Design: galvanized Dimensions: 6.3 x 70 mm Pictures are for material illustration purposes only. Material color may vary as appropriate. - The workbenches are picked unassembled; - The workbench uprights are pre-assembled; - Usual production time is approx. 3-5 working days. General information about this item: This item is only offered for pick-up. Any additional requested transport or shipping of this item entails extra costs, which can be individually inquired based on the delivery location and scope.

Condition: ready for operation (used), Year of construction: 2005, clamping force: 4,000 kN, overall weight: 22,500 kg, Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details. • Quantity available: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. moving platen weight: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Screw speed: 350 rpm • Screw peripheral speed: 65 / 75 / 80 m/min • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Total installed power: 96.2 kW • Heating: Pgedpfsy A Ny Eex Amyop • Cylinder heating capacity: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Suitable for curved shaped edges Good condition, possible to test ! Pgjdpfozc Hxqex Amyop