Used Snh 513 611 for sale (453)

Condition: good (used), Plummer Block Housings, Plummer Block Housings, Bearing Block Plummer Block Housing, Plummer Block Housing Unit, Plummer Block Housing Units, SKF Plummer Block Housing, Plummer Block Unit Bsdpsv Ulhksfx Amrodh -Manufacturer: SKF, plummer block housing type SNH 513-611 -Bore diameter: 77 mm -Quantity: 1x bearing housing available -Dimensions: 275/110/H150 mm -Weight: 6.6 kg

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. Bjdpfez Dz Rtjx Amrodh • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: used, Year of construction: 2007, Combination dough sheeter, Seewer Rondo SKO 611 Year of manufacture: 2007 Condition: cleaned and inspected 1 belt renewed Suitable for all types of dough (sheeting and lamination) Stainless steel cladding With computer control Belt width: 635 mm Bodpfx Amoz A Sqzoredh Roller width: 670 mm Roller gap: 0.3 – 45 mm

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device Bdsdpfxsyr Hk Se Amreh electronically heated 15° joint forming rails, controlled in pairs via regulator quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System year 2021

Condition: used, Quantity: 3 available Used Siemens feed module for industrial drive technology. Manufacturer: Siemens Model: 6SN1145-1AA01-0AA1 Series: SIMODRIVE 611 Product type: Feed module Design: Uncontrolled Application area: CNC and servo drive systems Mounting type: Control cabinet mounting Bedpfxszluato Amrodh Cooling: Air-cooled System: SIMODRIVE 611 digital Condition: Used

Condition: used, functionality: fully functional, With this offer, you are purchasing a used accessory, the ‘Konica Minolta Large Capacity Unit LU-202XLm’. In this offer, you are purchasing a used brochure finisher ‘Konica Minolta SD-513’. Bdedpfx Asyr Rkcjmrsh Item for sale: 1 x Konica Minolta SD-513: Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: good (used), Year of construction: 2006, 8 color (7 mounted) Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm Bedpsn Utdqofx Amrsdh * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Year of construction: 2006, condition: good (used), 8 color Polytype BDM 611 cup printing machine. Including viterno UV system and Corona, Arcotec pre-treatment. Bedpfx Ajn Utctomredh * Capacity: 36000 cups/hr * Min. cup diameter: 60 mm * Max. cup diameter: 130 mm * Max. cup height: 160mm This Cup Printing machine is already disassembled and secured for transport (Location: Waalwijk, The Netherlands)

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Bodpfszt Dmrsx Amrsdh Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: used, Year of construction: 2008, number of axes: 3, working width: 1,300 mm, working length: 3,200 mm, TECHNICAL DETAILS Working area, X-axis: 3,200 mm Working area, Y-axis: 1,300 mm Bdodpjz Ekchefx Amroh Number of controlled axes: 3 Total number of drilling spindles: 36 Tool change stations: 10 MACHINE DETAILS Power of main electric spindle: 11 kW EQUIPMENT Type of machining: Drilling and milling The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7468

Condition: used, Used Siemens SIMODRIVE 611 power module for industrial CNC and servo axes. Manufacturer: Siemens Series: SIMODRIVE 611 Product type: Power module Model: 6SN1123-1AB00-0AA1 Application area: CNC drive technology Bdsdpfx Ajzr T Dqemroh Design: Modular design Mounting type: Control cabinet mounting Cooling: Air cooling Condition: Used

Condition: ready for operation (used), Some Siemens and Vacon automation components are available. 1) Frequency inverter Vacon NXS00225. 2) Power module Siemens Simodrive 611 50A. 3) 2x power module Siemens Simodrive 611 25A. 4) 5x infeed module Siemens Simodrive 611 10kW/25kW. 5) 3x infeed module Siemens Simodrive 611 5kW/10kW. Documentation available. On-site inspection is possible. All articles are new. Bdjdpfx Amox I Rp Eorsh

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: automatic, fuel type: diesel, empty load weight: 10,800 kg, lifting power: 3,500 kg/m, lifting height: 13,000 mm, Year of construction: 2007, operating hours: 4,870 h, Equipment: all wheel drive, cabin, onboard computer, pallet forks, 2 JLG 3513 telescopic loaders, model year 2007 Machine 1: (MACHINE 1 HAS BEEN SOLD) JLG 3513 Model year 2007 According to the hour meter: 4,871 hours 13 meters 3.5 tons Machine 2: Bdsdpjy Dznkofx Amroh JLG 3513 Model year 2007 According to the hour meter: 4,799 hours 13 meters 3.5 tons Both machines have the same equipment: - Perkins engine! - Powershift transmission! - Incl. forks - Mechanical quick coupler - Auxiliary circuit to the fork carriage - Hydraulic outriggers - Hydraulic leveling system - Cabin with heater - Lighting system with turn signals - Joystick control - All-wheel drive - 3 steering modes - Immediately ready for use - Good tires - Incl. CE Selling price: €23,900 net per machine! Affordable delivery also possible! New bucket or new work platform available at an additional cost!

Condition: used, Year of construction: 1996, CNC TOOL AND CUTTER GRINDER Bdedpfx Amozxhqroreh Manufacturer: Alfred H. Schütte, Cologne, Germany Model: WU 405 Year of manufacture: 1996 Serial number: Series 12, No. 09 Machine type: Five-axis CNC universal tool and cutter grinder CNC control: NUM Drive system: Siemens SIMODRIVE 611 Axis travel: - X axis: 540 mm - Y axis: 280 mm - Z axis: 260 mm - A/W rotary axis: approximately 355° - C-axis grinding-head rotation: 330° - Manual grinding-head inclination: ±25° Working range: - Centre height: approximately 200 mm - Maximum clamping length between centres: approximately 700 mm - Maximum number of divisions: 999 - Programmable lead range: approximately 0.5–10,000 mm Feed ranges: - X axis: 0.1–10,000 mm/min - Y axis: 0.1–10,000 mm/min - Z axis: 0.1–5,000 mm/min Grinding spindle: - Double-ended grinding spindle - Spindle-speed range: approximately 1,800–12,000 rpm - Maximum spindle speed: 12,000 rpm - Frequency-controlled spindle motor Electrical data: - Rated operating voltage: 400 V - Power supply: three-phase - Frequency: 50 Hz - Rated current: 18 A - Electrical drawing number: PE-WU400-1209 - CE marked Approximate machine data: - Machine weight: approximately 3,150 kg - Fully enclosed grinding area - Five CNC-controlled axes - Suitable for manufacturing and resharpening cutting tools - Designed for grinding medium and large workpieces and for grinding between centres

Condition: used, Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 13,000 kg, PARALLEL LATHE used, 500x5000mm, TIANSHUI SPARK mod. CW61100E, year '89: Center height mm 500, Max turning diameter on bed mm 1000, Max turning diameter on carriage mm 680, Distance between centers mm 5000, Bar passage mm 140, Spindle nose attachment: ASA 11, Spindle speed: 5 - 400, Spindle power: 36 Kw, Overall dimensions mm (LxWxH) 7100x2500x1700, Machine includes: 4-jaw independent self-centering chuck mm 1000, Fixed steady rest, Fixed steady rest mm 460, Traveling steady rest mm 220, Bdsdpfozg Tz Sjx Amrjh Tailstock with Metric 80 taper, Tool turret type: rotary, fixed, Coolant system.

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Bedpfx Aszw H Hiomrodh Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: like new (used), amount 1 STK Bdodsul Eu Iopfx Amrjh

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 611 kW (830.73 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,604 kg, input voltage: 400 V, total width: 2,260 mm, total length: 6,740 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30KAV 0600 0007 611 KW Cooling capacity: 611 kW / 173.73 tons (12/7 — 35°C) Year of manufacture: 2019 Options: Hydraulic module. Economizer. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06ZCE1T3AA06013 (screw, inverter) Type of refrigerant: R134А Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump Wilo DL80/160(148)-11/2-NGS (Frequency inverter), expansion vessel. Dimensions: 6.74x2.26x2.3 m. Weight: 5604 kg. Working hours: 6080/6068 h. Condition: Used, tested, fully operational Bodozw Uftjpfx Amredh CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, This listing is for a Sartorius Practum The unit is in full working condition and is ready for immediate release. The Practum series from Sartorius is positioned as a standard‑laboratory precision balance line: “you can’t go wrong … without compromises in precision and reliability.” The 513 model variant supports a weighing capacity of ~510 g with readability of 0.001 g (1 mg). For example, for the 513 model: capacity 510 g, readability 0.001 g, repeatability ~±0.001 g, linearity ~±0.002 g. Robust build: German‑engineered weigh cell protected against overload, aluminium die‐cast base + ABS housing in many models. Practical features for lab use: Bodpfexv Abtox Amredh A draft‑shield/wind‑protection for precision weighing, especially for those 1 mg readability contexts. The draft shield is described as robust yet easy to clean/disassemble. Supervisor lock: a menu lock to prevent unintentional changes by operators. USB interface (“Mini‑USB”) for data export and “Plug & Work” connectivity to PCs/printers with minimal extra software. Level‑indicator (bubble) and extra‑large adjustable feet for easier manual leveling. Cleanability/maintenance: The brochure states that the draft shield side windows, sliding cover and stainless steel parts on certain models (including 213/313/513) are easily removable for cleaning. Multi‑application: The balance supports not just standard weighing, but also density determination, percent weighing, check‑weighing, counting, etc

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm Bdodpfx Aerb E Hmsmroh -Weight: 10.6 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm Bodjrb E Hbjpfx Amrsdh -Weight: 6.8 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Bdsdpfx Amjwcyngjrjh -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 Bsdpfx Aswcyq Iomrodh -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 Bodpfx Aorb E Hfjmrjdh -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Bsdpforb E Hqjx Amrsdh -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg