Used Sintering Furnace for sale (804)

Condition: good (used), Foundry4 Dosing Furnace TD1400DC Aluminium Melting Furnace Melting Furnace 850°C Capacity 1,400 kg Heating power 22 kW 4 units in stock Dodpfx Aboxt Habj Tjcr

Condition: new, El. heated chamber furnace, make VEI type: VEI_KO_EB Dedpeipvgijfx Ab Tjcr recirculation: horizontal airflow max. furnace temperature : 650°C internal dimensions (w x h x t): 800 x 800 x 1000 mm heating power: 51 kW fan power: 5,5 kW connected load: 61 kVA

Year of construction: 1991, condition: used, Technical details: max. temperature: 1200 Grad size of opening: 450 mm container volume: ca. 80 l working depth: Kammertiefe: 600 mm voltage: 380 V total power requirement: 46 kW weight of the machine ca.: 2,1 t dimensions L x W x H: 1,6 x 1,6 x 1,46 m dimensions electric cabinet: 400 x 600 x 760 mm Electric melting furnace, crucible furnace, tiltable pouring height= 1050mm pouring Ø 80mm lining=chamot Swing out via 2x hydraulic arm Hydraulics: Manufacturer Houch Hildesheim Optionally an additional crucible can be sold, please ask. Size outside: Ø 1240mm x 1000mm Size inside: Ø 840 x 1000mm Volume of contents: approx. 260 liters Slag collection material: circulation Ø center = 940mm, size 50 x 50mm Dcjdpfx Aou N Ak Njb Tsr Material = steel is heat resistant *

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Dedpfx Abod I T Exs Tscr Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: excellent (used), Year of construction: 2017, Max. glass size: 3210 x 6000 mm Min. glass size: 200 x 400 mm Dedpsik E Srefx Ab Tjcr Glass thickness: 4 - 19 mm Start-Up: 2018

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, Equipment: documentation/manual, TAMGLASS / GLASTON Dcedpoxtf Dfofx Ab Tsr HTF ProE – 2448-ADS-R 2400 x 4800 mm, 3 – 19 mm, Right – Left Glass tempering furnace (for Low-E glass) Year: 2006 Noise reduction cabin included 160 kW compressor for 3 mm glass included In good condition.

Condition: excellent (used), Manufacturer / Type: Nabertherm L 08/14 with programmable C19 controller Configuration: horizontal Rated temperature: up to 1400 °C (continuous operation permissible temperature likely lower) Chamber volume: 8 liters Description: • Usable dimensions (W×H×D): approx. 15 × 15 × 30 cm • External dimensions (W×H×D): approx. 61 × 140 × 71 cm • Weight: approx. 100 kg • Maximum power consumption: 3.3 kW • Plug: 380 V CEE (three-phase, 16 A) Djdpfjxr S Rpsx Ab Tocr Scope of delivery: Furnace only, no additional accessories – see original photos Condition: Used, in good technical and visual condition. The heating rod holder on the right side is slightly damaged, but the unit is fully operational. Shipping: Freight forwarding or personal pickup Additional information: • Fast heat-up times (in test: approx. 30 minutes to 1000 °C) • Labotherm, Tmax 1400 °C • High-quality Al₂O₃ fiber insulation for rapid heating • Special heating wire on ceramic oxide support tubes allows free heat radiation (→ long service life) • Heating from both sides • Low external casing temperature • Integrated control system with electronic safety interlock • Programmable control via C19 controller

Year of construction: 2016, condition: new, heated length: 4000 mm Dodocdizfspfx Ab Tjcr conveyor belt width: 900 mm temperature: max. 950 ° C

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t Dcjdpfxsu Nw E Uj Ab Ter dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace Dedpjiryyajfx Ab Tocr - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: good (used), horizontal single-chamber glass tempering system suitable for coatet glass assignable area: max. 2400 x 4200 mm KW: 814,5 Dimensions: length = 22 m, width = 7 m Djdpfxsipx Dyj Ab Tjcr

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Dsdpfohz D Iwjx Ab Tecr MARCELS MASCHINEN AG

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Dcedpfjxp Rbhex Ab Tor

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace Dodecmr D Hepfx Ab Tscr max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Year of construction: 2012, condition: used, Technical details: max. temperature: 700° - übliche Temperatur: 400 - 650°C Grad size of opening: B: ca. 2200 x T: ca. 3800 x H: ca.1100 mm program control: Siemens S7/300 IM 151-7 interface: Ethernet container volume: Ofen-Volumen: 9,2 m³ l control voltage: 24 / 230 Volt current type: 1P/PEN; 50 Hz Voltage: 400 V elect. connected power requirement of heater: 3 x 3 x 21 kW = 189 kW flow rate: 3 x ca. 9.000 = 27.000 m³/h weight of the machine ca.: 8,0 t dimensions of the machine approx. HxWxD: ca. 3.9 x 3.8x 4.8 m dimensions electric cabinet: ca. B: 2.400 x T: 400 x H: 2.000 mm transport dimensions LxWxH: ca. 5,2 x 3,6 x 2,9 m Electrically heated circulation oven Electric annealing furnace whose housing is made of profiled sheet steel and lined with lightweight refractory bricks/ firebricks. Application/processes: mainly annealing of low-alloy and high-alloy wood cylinders (e.g. alloyed gray cast iron) Usual operating weight 5000kg max. 8000kg The parts are placed directly crosswise on the bogie hearth/grate in the flow device. (Height above floor approx. 750mm without grate) Heating integrated in oven ceiling Circulation fan (3 compact fans) on oven side wall, 3 x 4.0 kW = 12.0 kW Forced cooling (1 cooling air fan) Program control via 25 programs with 50 program sections per program Dcjdpfju R Dhxox Ab Tor Oven door/lifting door with SWE gear motor approx. 2.2 kW (frequency-controlled) Bogie hearth drive approx. 3.0 kW SEW geared motor (frequency-controlled) incl. center rail (chain drag) used, good condition *

Condition: good (used), Year of construction: 1991, functionality: fully functional, load capacity: 650 kg, EROS SIZE 7 furnace for carburizing, carbonitriding and quenching. Refractory exchanged with Kanhtal resistors. Useful dimensions. 700x450x1150mm Chamber dimensions: 750x560x1540 mm Outer dimensions (layout) 2500x 3715x 4500 mm Furnace heating power: 85 kW Oil heating power : 35KW Furnace working temperature : 20-950ºC Cesats dimensions: 700x1150x150 mm (capacity 3 superimposed baskets) Oil tank capacity: 4500 liters Maximum load approx : 600-650 kg Dcjdpfx Absu A Tf Do Tor Control equipment UDC-5000 (potential carbon control) Carbon sensor rod (with co2 cleaning) Few hours of use

Year of construction: 2006, condition: good (used), Kiln Superturbo, Pulsar model, 180 mc, intermittent type with a firing temperature till 1150°C, and a maximum temperature of 1200°C, equipped with 24 high-speed burners, n° 1 wagon inside the chamber, n° 1 vertical door, reverse induction chimneys, cowl for the expulsion of the smokes, automatic control panel with ATR 313, lining in ceramic fibre, high density, 1260°C type; 4 Heat exchangers for hot combustion air. Thermal Power 3,2 MW Dcsdpfxjhgkdqe Ab Tjr Dimensions 7x7x4 meters, capacity of wagoon 80 tons.

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° MARCELS MASCHINEN AG Dedpfx Absvhazfj Tscr

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Alternatre Gas inlet. Dcodpfx Abexnpw Es Tor Good working condition. Please check out our other listings as well.

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Dsdjxpuahspfx Ab Tscr Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Year of construction: 2013, condition: used, max. temperature 1.100 Grad size of opening 250 x 170 mm depth of chamber 370 mm volume 15 L voltage 230 V Dsdpsxf I T Hefx Ab Tocr total power requirement 3,6 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,48 x 0,65 x 0,57 m - Serial-No.: 271414 - control: NABERTHERM B180

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) Dodevkhl Djpfx Ab Tjcr In good technical condition. Inspection is possible by appointment.

Year of construction: 1985, condition: used, Hardening furnace Heraeus Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c Dsdpfx Ajgtxuqjb Tscr

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° MARCELS MASCHINEN AG Dodsw Nnquopfx Ab Tscr

Year of construction: 2003, condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Technical data: Capacity 650 L Power: 26 KW Voltage: 400 V Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm depth 85 cm height 110 cm External dimensions width 112.5 cm Dcodpfxjvrg Sls Ab Tsr depth 155 cm height 192 cm Nabertherm C40 controller